Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Hersteller: Bosch Dateigröße: 2.14 mb Dateiname: Unterrichtssprache:

Additional functions and options buttons ....Individual settings, page 5 Press ..(Start/ Add laundry) Washing End of programme when ... ... the ..(Start/Add laundry) button is off and -....-appears in the display panel. If the display panel lighting is off, press any button ..Energy-saving mode, page 5. Cancel the programme Programmes at high temperatures: .To cool the laundry: Select Rinse ....Press ..(Start/Add laundry). Programmes at lower temperatures: .Select Spin or Drain ... .Press ..(Start/Add laundry).Change the programme if... ... you have selected the wrong programme by mistake: . Reselect the preogramme. .Press ..(Start/Add laundry). The new programme starts from the beginning. Add laundry when ... ..page 5 ... ..(Start/Add laundry) is pressed and in the display panel both ......+....symbols are then lit. If ....is lit, the washing machine door cannot be opened. Select the ..(Start/Add laundry) button. Programme selector for switching the machine on and off and for selecting the programme. Can be turned in either direction. All buttons are sensitive and need only to be touched lightly. If you press and hold the ..(Finished in) option button, the appliance automatically runs through the settings options. 3 Switch off Turn the programme selector to Off. Turn off the tap Not required for AquaStop models ..Refer to Installation instructions.Remove the laundry Open the washing machine door and remove the laundry. If ..(Rinse hold = no final spin) is active: turn the programme selector to Drain ..or Spin . Select the spin speed if necessary. Press ..(Start/Add laundry). . Remove any foreign objects -risk of rusting. . Leave the washing machine door and detergent drawer open so that any residual water can dry away. 3 4 5 Individual settings ..Options buttons The spin speed and temperature can be changed before and during the selected programme. The effects depend on the programme progress. ......(Temperature °C) You can change the displayed washing temperature. The maximum washing temperature that can be selected depends on the programme that has been set. ......(Finished in) When you select the programme, the relevant programme duration is displayed. You can delay the start of the programme before it begins. The "Finished in" time can be set in increments of one hour up to a maximum of 24 hours. Press the ..(Finished in) button repeatedly until the desired number of hours is displayed (h = hour). Press ..(Start/Add laundry)...(Spin speed in rpm) / ..(Rinse hold = no final spin) You can change the spin speed shown or select ....(Rinse hold = no final spin, laundry remains in the water after the final rinse, ..-..-..-appears in the display panel). You can change the spin speed shown. The maximum selectable spin speed depends on the model and on which programme is currently sel ected. ..Additional functions ..and overview of programmes, page 7 ..Speed Perfect For washing in a shorter time with a washing result comparable to that of the standard pro-gramme. Maximum load ..Overview of programmes, page 7. ..Eco Perfect For saving energy with a washing result comparable to that of the standard programme. ..(Easy-Iron) Special spin sequence with subsequent fluffing. Gentle final spin at reduced speed. Residual moisture in the laundry is increased slightly. ..Super Additional rinse cycle. For areas with very soft water or for further improving the washing result. ..Childlock ..Childlock/ appliance lock You can lock the washing machine to prevent the functions you have set from being changed inadvertently. ON/OFF: after the start/end of the programme, press and hold ..(Start/Add laundry) for approx. 5 seconds. Note: The childlock can remain activated until you wish to start the next programme, even after switching off the machine. Then you can deactivate the childlock before starting the programme and activate it again as necessary once the programme has started. Note: .The ....symbol is lit: Childlock active. .The ....symbol flashes: Childlock active and then the programme selector is altered. To prevent the programme from stopping, turn the programme selector back to the original programme, the ..symbol is lit again. ..Add laundry ......+....in the display panel If you want to add additional items of laundry after the programme has started, press the ..(Start/Add laundry) button. The machine checks whether adding laundry is possible. ......+..are lit: Adding laundry is possible. ......flashing: Wait until ......+..are lit. Note: Only open the washing machine door when both the ......+..symbols are lit. ....: It is not possible to add laundry. Note: for safety reasons, the washing machine door remains locked when the water level and/ or temperature is high, or during spinning. To continue the programme, press the ..(Start/Add laundry) button. ..Energy saving mode If the washing machine is switched on and is not operated for several minutes before the programme starts or at the end of the programme, the display...

Herunterladen

Geben Sie zwei Ziffern: