Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
Instruction Manual ULTIMA Congratulations on the purchase of your new Ultima Washer Dryer. IMPORTANT INFORMATION Please read this instruction book thoroughly before installing and using your appliance for the first time. For Model WD71 Electricity Supply WARNING: This appliance must be earthed. Fuses Your appliance comes fitted with a plug and a 13A fuse. If you need to replace the fuse, only those rated at 13A and ASTA approved to BS1362 should be used. To change fuse lift holder to vertical position and lift fuse out. To replace, insert fuse and push fuse holder down into locked position. Correct replacement is identified by colour coding or the marking on base of plug. WARNING: Do not use plug unless fuse holder is in locked position. Changing the Plug Cut off and dispose of the supplied plug if it does not fit your socket. WARNING: To avoid a shock hazard do not insert the discarded plug into a socket anywhere else. IMPORTANT: WIRES IN THE MAINS LEAD Green and yellow (Earth) 13A ASTA ARE COLOURED IN ACCORDANCE WITH wire to terminal approved fuse to THE FOLLOWING CODE: marked ‘E’, BS1362. Green/Yellow -Earth symbol , or Blue -Neutral coloured green Brown -Live and yellow. Brown (Live) If you change the plug, the colour of wire to terminal Blue (Neutral) marked ‘L’ or wire to terminal coloured red. wires in the mains lead may not correspond with the colour of the marked ‘N’ or markings identifying terminals in the coloured black. Cord clamp plug. You should therefore wire it as Fig 1 shown (Fig 1). Changing the Mains Lead A special lead can be ordered from Hotpoint Service UK: 08709 066 066 or Republic of Ireland: 1850 302 200 If you have damaged the existing lead or require a longer one a charge will be made. It is strongly advised that this work is carried out by a qualified electrician. CE marking certifies that this appliance conforms to the following EEC directives:Low Voltage Equipment - 72/23/EEC & 93/68 EEC Electromagnetic Compatibility - 89/336/EEC, 92/31/EEC & 93/68/EEC Contents Electricity Supply ...................................... 2 Recycling & Disposal Information .............. 3 Installation Instructions 1. Choose a Location................................ 4 2. Remove Transit Brackets ...................... 5 3. Connect to the Water Supply ............... 6 4. Connect to a Drainage System 5. Adjust the Feet ..................................... 7 When you have installed your appliance, ensure it is ready to use by following the 10 Step Check List on page 7 Getting to know your Appliance Index ........................................................ 8 Button Selection Interlocking Door System Automatic Features ................................... 9 Wash & Auto Dry Programme .................................... 10 Independent Dry Programme......................................11 Choosing a Wash Programme Selecting a Prewash Washing Weight Loads ............................12 Gentle Wash, Rinse & Spin Options for Programme ‘G’ Washcare tips...........................................13 Choosing a Dry Programme Drying Weight Loads Removal Of Fluff Items Not Suitable for Tumble Drying Drying Tips ..............................................14 Optional Wash/Dry Features Option Buttons Automatic Features ............................ 15-16 The Dispenser Drawer Index Choose a Suitable Detergent....................17 Changing the Main Wash Indicator Dispensing Powder Detergent Dispensing Liquid Detergent Dispensing Fabric Conditioner Using a Dosing Ball.................................. 18 Cleaning Maintenance Wash.....................19 Troubleshooting............................ 20 Error Messages............................ 21 Hotpoint After Sales Service .............................................. 22 Hotpoint Guarantee Guarantee Terms & Conditions ............... 23 Key Contacts .................. Back Page Recycling & Disposal Information As part of Hotpoint’s continued commitment to helping the environment, Hotpoint reserves the right to use quality recycled components to keep down customer costs and minimise material wastage. Please dispose of packaging and old appliances carefully. To minimise risk of injury to children, remove the door, plug and cut mains cable off flush with the appliance. Dispose of separately to ensure that the appliance can no longer be plugged into a mains socket. Retention of this Instruction Manual Keep this instruction manual in a handy place for reference. It contains important details on the safe and proper use of your appliance. If you sell the appliance, pass it on to someone else, move house and leave it behind, make sure that you provide this manual so that the new owner can become familiar with the appliance and safety warnings. Installation Instructions IMPORTANT INFORMATION: . Do not plug in and switch appliance on at the mains until installation is complete. . You may be charged for a service call if a problem with your appliance is caused by incorrec...