Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Use the mode button to select the desired option, and the relative symbol will begin flashing. On the left-hand side, the value or the status (On-Off) of the selected option is displayed, and you can modify it using the select button. To access the subsequent option, press the mode button, otherwise press button B to start the wash cycle. All the options available are listed below. Only options relevant to the selected programme will be displayed. Temperature The display indicates the maximum temperature relating to the programme set, which can be reduced by pressing the select button right down to cold wash (Off). This option is available on all wash programmes. Spin Variation The display indicates the maximum speed relating to the programme The detergent dispenser with the additional bleach compartment is here. 3 set, which can be reduced by pressing the select button right down to its total exclusion (Off). During a wash cycle, the selection of the spin cycle exclusion is indicated by symbol coming on. This option is available on all wash programmes except for number 11 and Drain. Delay Timer This allows you to delay the start of the wash cycle by a minimum of 1 to a maximum of 24 hours by pressing the select button. The enabling of the delayed start is indicated by the symbol coming on and staying on until the wash cycle begins. This option is not available on the Draining and Spin cycle programmes. Easy Ironing This function allows your washing to come out of the machine without creases, making it much easier to iron. The appliance optimises the washing conditions according to the type of fabrics that are being washed. It is enabled with programmes 3-5-6-7-8-11 and Rinse cycles. To enable it, press the select button until the On sign comes on. In programmes 6-7-8-11 and Light Rinse cycles, the wash cycle is interrupted and the washing is left to soak in water before the appliance is drained. To complete the cycle, press the select button. During a wash cycle, the enabling of this option is indicated by symbol coming on. Note: It must not be used with the Stain Erase option. Rinsing level This increases the efficiency of the rinse. We recommend that you use it when dealing with a full load and a great amount of detergent. There are three levels; press the select button to select them. Low Medium High This option is available on programmes 1-2-3-4-5-6-7-8 and Rinse cycles. Stain Erase (see page 7) Thanks to this command, the washing machine will carry out a more intensive wash that optimises the effectiveness of the liquid additives, thus allowing more resistant stains to be removed. To use this, press the select button until the On sign comes on. During a wash cycle, the selectionof this option is indicated by symbol coming on. This option is available on programmes 2-3-5-6-7-8-10 and Rinse cycles. Note: It must not be used with the Easy Ironing option. Wash Intensity This allows you to modify the characteristics of the selected wash programme, according to how soiled the washing is. There are three levels; press the select button to select them. Low Medium High This option is available on programmes 1-2-3-5-6-7-8. A class at 40°C Your washer has a special programme to allow you to obtain optimum results even at low temperatures. By setting programme 4 at a temperature of 40° C, the results you will obtain will be the same as you would normally obtain at 60°C thanks to the washing machine’s action and the length of the wash cycle. Daily wash Your washer has a programme available for the washing of lightly soiled garments in a short amount of time. By setting programme 9 at a temperature of 30°C, you can wash different types of fabrics together (except for wool and silk), with a maximum load of 3 kg. This programmes allows you to save on both time and energy as it only lasts around 30 minutes. WE RECOMMEND THE USE LIQUID DETERGENT. A class at 40°C Your washer has a special programme to allow you to obtain optimum results even at low temperatures. By setting programme 4 at a temperature of 40° C, the results you will obtain will be the same as you would normally obtain at 60°C thanks to the washing machine’s action and the length of the wash cycle. Daily wash Your washer has a programme available for the washing of lightly soiled garments in a short amount of time. By setting programme 9 at a temperature of 30°C, you can wash different types of fabrics together (except for wool and silk), with a maximum load of 3 kg. This programmes allows you to save on both time and energy as it only lasts around 30 minutes. WE RECOMMEND THE USE LIQUID DETERGENT. A programme for all seasons Type of fabric and degree of soil Programme Temperature Detergent Fabric Stain Length of Description of wash cycle for wash softener Erase / the cycle Bleach (minutes) COTTON Exceptionally soiled whites (sheets, tablecloths, etc.) 1 90°C u u 140 Prewash cycle, wash cycle at 90°C, rinse cycles, intermediate and final spin cycles Excep...