Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: GE Monogram Dateigröße: 485.36 kb Dateiname: Unterrichtssprache:

• The washer drain must be 3 feet or more off of the floor to prevent the washer from draining during fill. If your washer drain is less than 3 feet above the floor, use the anti-siphon clip shipped with your washer to attach the drain hose to the back of your washer. The clip will hold the drain hose in place and ensure that the washer does not self-drain during fill. See installation instructions for details. • Only the straight top portion of the drain hose should be inserted into the drain. Inserting the ribbed section of the hose may create a siphon, and cause the washer to drain as it fills. • If the drain opening is excessively tight around the drain hose, or if the opening around the hose is closed with rags or other material, a siphon may occur, and the washer will drain as it fills. To avoid this problem, ensure that there is open area around the end of the drain hose to allow air to flow into the drain as water is pumped out of the washer. OPERATION Possible Causes What To Do Washer pauses during spin cycle This is normal • The washer may pause during the spin cycle to remove soapy water more efficiently. Washer won’t operate Washer is unplugged • Make sure cord is plugged securely into a working outlet. Water supply is turned off • Turn both hot and cold faucets fully on. Controls are not set properly • Check controls and make sure Cycle knob is pulled out to ON position. Lid is open—safety feature prevents agitation and spinning when lid is up • Close lid and reset cycle, to the beginning if necessary. Circuit breaker/fuse is tripped/blown • Check house circuit breakers/fuses. Replace fuses or reset breaker. Washer should have separate outlet. PERFORMANCE Possible Causes What To Do Colored spots Incorrect use of fabric softener • Check fabric softener package for instructions and follow directions for using dispenser. • Pretreat stain and rewash. 12 Dye transfer • Sort whites or lightly colored items from dark colors. PERFORMANCE (cont.) Possible Causes What To Do Grayed or yellowed clothes Not enough detergent • Use more detergent (especially with larger loads). Be sure to follow detergent manufacturer’s directions. Hard water • Use a water conditioner like Calgon brand or install a water softener. Water is not hot enough • Make sure water heater is delivering water at 120°F–140°F (48°C–60°C). Washer is overloaded • Select load size to match clothes load. Detergent is not dissolving • Add detergent as wash basket fills with water before you load clothes. Dye transfer • Sort clothes by color. If fabric label states wash separately, unstable dyes may be indicated. Lint or residue on clothes Clothes are air or line dried • If you do not dry your clothes with a clothes dryer, your clothes may retain more lint. Incorrect sorting • Separate lint producers from lint collectors. Washing too long • Wash small loads for a shorter time than larger loads. Detergent not dissolving • Add detergent as wash basket fills with water, before you load clothes. • Try a liquid detergent. • Use warmer water temperature. Overloading • Load clothes no higher than the top row of holes in the washer basket. • Make sure load size selected matches clothe...

Herunterladen

Geben Sie zwei Ziffern: