Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Beko Dateigröße: 760.95 kb Dateiname: 1d7c35d1-335a-4401-a5d7-c7102888e81e.pdf Unterrichtssprache:

• More laundry may be loaded or taken out during the time delay period. At the end of the time delay countdown process, time delaying symbol (Figure 3-13h) fades and the washing starts as the program duration is displayed. Changing the delay time If you want to change the time during the countdown: 1. Press “Start/Pause/Cancel” button (Figure 2-10). “:” in the middle of the screen will stop flashing. Standby symbol (Figure 3-13k) will light up. Time delaying symbol (Figure 3-13h) will flash. Start Symbol (Figure 3-13j) will fade. 2. Press “Time delaying” buttons “+” and “-” (Figure 2-8) to set your desired time delay. 3. Press “Start/Pause/Cancel” button (Figure 2-10). Time delaying symbol (Figure 3-13h) will light up. Standby symbol (Figure 3-13k) will fade. Start symbol (Figure 3-13j) will light up. 4. The “:” in the middle of the displayed time delay will start flashing. Canceling the time delay If you want to cancel the time delay countdown and start the program immediately: 1. Press “Start/Pause/Cancel” button (Figure 2-10). The “:” in the middle of the displayed time delay will stop flashing. 2. Start symbol (Figure 3-13j) will fade. The standby symbol (Figure 3-13k) and the time delaying symbol (Figure 3-13h) will flash. 3. Press time delaying button “-” (Figure 2-8) to decrease the desired time delay. Program duration after 30 minutes shall be displayed. 4. Press “Start/Pause/Cancel Button” (Figure 2-10) to start the program. Starting the Program 1. Press “Start/Pause/Cancel” button (Figure 2-10) to start the program. 2. The start symbol (Figure 3-13j) which indicates that the program has started will light up. 3. The door locks and the door locked symbol (Figure 3-13i) will light up. 4. Symbol of the relevant step (prewash, main wash, rinse, softener and spin) that the program has started from will light up (Figure 3- 13f). Progress of program. The progress of a running program is shown through a number of symbols on the screen. • At the beginning of each program step, the relevant symbol in the series of symbols will light up and thus, at the end of the program, all symbols will remain lit up. The symbol that is lit up at the far right of the series of symbols indicates the step that is being carried out. Prewash When “Prewash” auxiliary function is selected, prewash symbol will light up to indicate the beginning of prewash step. Main wash Main wash symbol will light up to indicate that the main wash cycle has started. Rinse Rinse symbol lights up at the beginning of the rinse step. Softener Softener symbol lights up at the beginning of softener step. Spin Spin symbol will light up at the beginning of the final spin, during “Spin” and “Pump” special programs. • If the machine is not spinning, the program may be in rinse hold mode or the automatic spin correction system has been activated because of the excessive unbalanced distribution of the laundry in the machine. Changing the selections after the program has started The selected spin speed and program temperature fade out. An empty frame appears. When the “Program selection” button is brought to the appropriate position, rpm and temperature data reappear. Switching the machine to standby mode Machine is switched to standby mode by pressing “Start/Pause/Cancel” button (Figure 2-10) for a short time. Standby symbol (Figure 3-13k) which indicates that the machine is in standby mode lights up and the start symbol (Figure 3- 13j) that shows the program has started and is still continuing fades out. Selecting or canceling an auxiliary function in standby mode Auxiliary functions can be cancelled or selected in accordance with the step the program is at. Adding/taking out laundry in standby mode The door can be opened if the water level is suitable. The door locked symbol (Figure 3-13i) will light up until the door is suitable for opening. This symbol will fade out as soon as the door is allowed to open. Laundry may be added / taken out by opening the door. Door lock Door Locked Symbol (Figure 3-13i) lights up when the loading door is locked. This symbol will flash until the door is allowed to open. Do not force the door at this stage. This symbol will fade out as soon as the door is allowed to open. You may open the door after the symbol fades out. Child-proof lock You can protect the appliance from being tampered by children by means of the child-proof lock. In this case, no change can be made in the running program. 2. The machine is switched to child-lock by pressing the 2nd and 4th auxiliary functions for 3 sec. “C:on” (Child lock is activated) label appears on the screen. The same symbol will also be displayed on the screen whenever any button is pressed while the machine is child- locked. To deactivate the child-proof lock, press the 2nd and 4th auxiliary function buttons for 3 sec. “C:OFF” (Child lock is deactivated) label appears on the screen. Ending the program through canceling “Start/Pause/Cancel” button (Figure 2- 10) is pressed for 3 se...

Herunterladen

Geben Sie zwei Ziffern: