Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
•If caused by detergent, mix 1 cup (240 ml) white vinegar with 1 quart (.95 L) water in a plastic container. Soak item 1 hour. Rinse. •Avoid overfilling detergent and fabric softener compartments of dispenser. •If caused by fabric softener, rub stains with bar soap. Wash. Discoloration, •Not enough detergent. •Rewash with correct amount of •Sort items by soil level and color. graying •Wash water temperature too low. detergent and hottest water safe for •Use correct amount of detergent, hottest •Incorrect sorting. fabric. Add bleach safe for fabric. water and bleach safe for fabric. Greasy, oily stains •Not enough detergent. •Undiluted liquid fabric softener poured directly on fabric. •Treat with prewash stain remover or liquid detergent. •Increase detergent and water temperature. Rewash. •Rub fabric softener stains with bar soap. •Use correct amount of detergent and hottest water safe for fabric. •Do not pour liquid fabric softener directly on fabric. See Washing Procedures for directions on adding softener. Holes, tears, or snags •Incorrect use of chlorine bleach. •Unfastened zippers, hooks, •May be irreversible if rips, tears and seams cannot be mended. •Never pour chlorine bleach directly on fabric. buckles. •Rips, tears and broken threads. •Overloading the washer. •Degradation of fabric. •Check condition of items before washing. See Washing Procedures for preparing and loading the wash load and adding chlorine bleach. Lint •Incorrect sorting. •Tissues left in pocket. •Overloading the washer. •Not enough detergent. •Undissolved detergent has left a residue resembling lint. •Reduce load size. Rewash using correct water temperature, water level, and amount of detergent. •Add nonprecipitating water conditioner to wash water to remove detergent residue. •See Washing Procedures for sorting and preparing the wash load. •Do not overload washer. •Use correct temperature and amount of detergent, water and wash time. •Static cling is attracting lint. •Load washed too long. •Add liquid fabric softener to final rinse. •Dry load in dryer. •Remove lint with lint brush or roller. Pilling (Fibers break off, ball up and cling to fabric.) •Pilling is normal with synthetic and permanent press fabrics. This is due to abrasion from normal wear. • Use a lint brush or shaver to remove pills. •Use fabric softener in the washer to lubricate fibers. •When ironing, use spray starch or fabric finish on collars and cuffs. •Turn items inside out to reduce abrasion. Residue or powder on dark items; Stiff, harsh fabrics. •Undissolved detergent. •Some granular detergents can combine with hard water minerals to form a residue. •Overloading the washer. •Rewash load. •Increase water temperature using hottest water safe for fabric. •Do not overload washer. •Use liquid detergent or use nonprecipitating water conditioner with granular detergent. Wrinkling •Overloading the washer. •Incorrect wash cycle for wash load. •Reduce load size. •Rinse in cold water with liquid fabric softener using the Perm Press or Delicate cycle. •Do not overload washer. •Remove items from washer as soon as cycle is completed. •Use liquid fabric softener. Yellow buildup of body soil on synthetic fabrics •Agitation time too short. •Wash water temperature too low. •Not enough detergent. •Soak in detergent booster or product containing enzymes. •Wash in hot water using full permanent press cycle. Increase detergent. Add bleach safe for fabric. •Or, treat with color remover. •Select correct wash cycle. •Use correct amount of detergent. •Wash synthetics frequently using hot or warm water. Yellow or brown rust stains •Iron or manganese in water supply, water pipes, or water heater. •To restore discolored load of whites, use rust remover safe for fabric. •Do not use chlorine bleach to remove rust stains. It may intensify discoloration. •Use nonprecipitating water softener. •Before washing, run hot water for a few minutes to clear lines. •Drain water heater occasionally. •For an ongoing problem, install an iron filter in your water supply system. 8 9 ENGLISH Care and Cleaning Figure 3 Figure 1 Figure 2 Figure 4 Follow Winterizing Instructions for cold weather care. (Lock tab is visible only after drawer has been pulled out) TO REFRESH OR CLEAN INSIDE OF THE WASHER: IMPORTANT: Do not load garments or other items in the washer when cleaning the inside of the washer. • Add a 1/2 cup of liquid bleach to the detergent compartment of the dispenser drawer and fill the bleach dispenser compartment to the Max Fill level and run WITHOUT a clothes load using the Normal Cycle setting. For Other Inside Cleaning • Before cleaning the washer interior, unplug the electrical power cord to avoid electrical shock hazards. • Dry around the washer door opening, flexible gasket, and door glass. These areas should always be clean to ensure a water tight seal. • When extremely soiled items have been washed, a dirty residue may remain on the drum. Remove this by wiping the drum with a nonabrasive ho...