Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
* This data is given purely as an indication: the consumption values may vary in relation to the quantity and type of laundry, the temperature of the water supply and the ambient temperature. The data refers to the highest temperature provided for each programme. For the duration of the programmes, please refer to the display on the control panel. 22 Washing programmes Programme Programme description Available options Load Consumptions* Energy kWh Water litres Soak 30° Soak for about 20 minutes at 30°C 7 Kg 0.5 26 Rinse 3 rinses Long spin at the max speed Spin red./Rinse hold Extra rinse 7 Kg 0.15 52 Softeners 1 rinse with liquid additive Long spin at max. speed Spin red./Rinse hold 7 Kg -22 Drain For emptying out at the end of the programme “Soak 30°” Water draining -7 Kg -- Spin Drain and long spin at max. speed Spin reduction 7 Kg -- 30 Minute wash Short cycle for lightly soiled fabrics Wash at 30°C 2 rinses Short spin Spin red./Rinse hold 2.5 Kg 0.35 45 Off (Reset) For cancelling the programme which is running or to switch the machine off --- 23 Drying Programmes Timed drying Degree of drying Type of fabric Max. load Spin speed Drying time mins Extra dry Ideal for towelling materials Cotton and linen (bathrobes, bath towels, etc.) 3.5 kg 1400 100-110 1200 105-115 1.5 kg 1400 50-60 1200 55-65 Store dry (*) Suitable for items to put away without ironing Cotton and linen (towels, T-shirts, bathrobes) 3.5 kg 1400 90-100 1200 95-105 1.5 kg 1400 40-50 1200 45-55 Synthetics and mixed fabrics (jumpers, blouses, underwear, household linen) 2 kg 900 70-80 1 kg 900 35-45 Iron dry Suitable for ironing Cotton and linen (sheets, tablecloths, shirts, etc.) 3.5 kg 1400 70-80 1200 75-85 1.5 kg 1400 35-45 1200 40-50 (*) The STORE DRY drying programme for cotton is the reference programme for the Energy Label data, in compliance with EC directive 92/75. 24 Maintenance and Cleaning You must DISCONNECT the appliance from the electricity supply, before you can carry out any cleaning or maintenance work. Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine. Do this separately from any washing, and according to the softening powder manufacturer's instructions. This will help to prevent the formation of lime deposits. After each wash Leave the door open for a while. This helps to prevent mould and stagnant smells forming inside the appliance. Keeping the door open after a wash will also help to preserve the door seal. Maintenance Wash With the use of low temperature washes it is possible to get a build up of residues inside the drum. We recommend that a maintenance wash be performed on a regular basis. To run a maintenance wash: . The drum should be empty of laundry. . Select the hottest cotton wash programme. . Use a normal measure of detergent, must be a powder (such as Ariel Futur). External cleaning Clean the exterior cabinet of the appliance with soap and water only, and then dry thoroughly. Cleaning the dispenser drawer The detergent dispenser drawer should be cleaned regularly. Remove the drawer by pressing the catch downwards and by pulling it out. Flush it out under a tap, to remove any traces of accumulated powder. To aid cleaning, the top part of the fabric softener compartment should be removed. Cleaning the drawer recess Having removed the drawer, use a small brush to clean the recess, ensuring that all washing powder residue is removed from the upper and lower part of the recess. Replace the drawer and run the rinse programme without any clothes in the drum. Cleaning the pump The water drain filter The pump should be inspected if • the machine does not empty and/or spin • the machine makes an unusual noise during draining due to objects such as safety pins, coins etc. blocking the pump. Proceed as follows: • Disconnect the appliance. • If necessary wait until the water has cooled down. • Open the pump door. • Place a container close to the pump to collect any spillage. 25 • Pull out the emergency emptying hose, place it in a container and remove its cap. • When no more water comes out, unscrew the pump cover and remove it. Always keep a rag nearby to dry up spillage of water when removing the cover. • Remove any objects from the pump impeller by rotating it. • Put the cap back on the emergency emptying hose and place the latter back in its seat. • Screw the pump cover fully in. • Close the pump door. Warning When the appliance is in use and depending on the programme selected there can be hot water in the pump. Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When replacing the cover, ensure it is securely retightened so as to stop leaks and young children being able to remove it. Cleaning the water inlet filter If your water is very hard or contains traces of lime deposit, the water inlet filter may become clogged. It is therefore a good idea to clean it from time...