Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
Please remove these before installing and connecting the machine. You will find details how to do this on the red sticker on the washing machine and in the installation instructions. М N 2ЦЗ 11200If 950 |Гв501Гб501 • I ф î & \êj iS) & Imj m С D E F G H I KL i Vili U/ 6 How to open the loading door Opening the loading door - before the Opening the loading door - after the machine machine Is connected. has been connected to the power supply. 1. Turn rotary control for emergency drain (A) a Press button, quarter turn anti-clockwise to the stop position. 2. Using a coin turn disc (B) anti-clockwlse until the loading door springs open. 3. Turn rotary control for emergency drain (A) in clockwise direction. 7 Your Lavamat Figure 1 /A Wash programme selector and Figure 1/K VARIOMATIC button programme sequence indicator Figure 1/L Button for short programme Figure 1/B Temperature selector Figure 1/M Buttons for lower spin speeds Figure 1/C On/Off button with indicator light Figure 1/N Button to cancel automatic Figure 1/D Door release button dispensing of fabric conditioner Figure 1/E Button for easy-care fabrics Figure 1/0 Detergent dispenser with double- Figure 1/F Button for delicates sided programme chart* removable Figure 1/G Button for wool Figure 1/P Outer door with inner door behind. Rating plate on inside of inner door. Figure 1/H Button for small loads Figure 1/Q Drain pump with emergency drain, and Figure 1/1 Button for energy saving programmes emergency door release to the left. Check list What to do before and after every programme If the machine is not permanently connected: ■ Plug in the machine and switch on at the power socket. ■ Make sure that the drain hose is not kinked. To hook the hose securely over the sink edge use the hose holder provided (figure 2). If the sink edge is too wide thread a piece of string through the hole in the hose holder (see figure 2/arrow) and secure on the wall or the tap over the sink. Make sure that the drain hose is not submerged in the pumped off water. ■ Connect the water inlet hoses to the taps. Before you select a programme: ■ Open the water taps. ■ Open outer door (press top left), open inner door (press door release button ^ ). ■ Distribute the laundry in the drum, close the doors. ■ Pull open the detergent dispenser (figure 1/3) and pour washing powder and fabric conditioner into the relevant compartments. Close the dispenser carefully. ■ Select the wash programme (see programme chart), press the on/off button to start the programme. End of programme: ■ Open inner and outer door and remove the laundry from the drum. If nothing else is to be washed, ■ press the on/off button ■ return the temperature selector to the “off ” position ■ turn off the water taps and switch off at the power socket and remove the plug. * Replacement charts are available from our Service Department. Sorting the laundry Sorting the laundry: Check the manufacturer’s instructions or the care label inside each garment (see the International Textile Care Labelling Code in the programme chart). The laundry should be sorted into: Cottons and linens (whites and coloureds), easy-care fabrics, delicate synthetics, woollens. Practical Hints ■ Do not mix whites and coloureds as the whites will become grey. ■ New items tend to loose some of their colour when washed for the first time. It is therefore advisable to wash them separately the first time. ■ Woollen items which carry the wool symbol must also bear the description “machine washable”. Woollen items which only bear the wool symbol cannot be washed in washing machines. ■ Make sure that no metal items (e.g. paperclips, safety pins, pins) are left in the laundry. Fasten buttons, zips, hooks and eyes, tie loose belts, long apron strings etc. ■ Remove stubborn stains prior to washing. ■ Synthetic curtains should be handled carefully as they snag easily. Remove the hooks or rollers and place the curtains in a pillowcase or washbag, to wash. We accept no responsibility for any damage, through incorrect handling. Opening and closing the doors ■ Outer door To open: Press against the top left-hand side of the door (if door is hinged on the left-hand side, press top right-hand side) and the door springs open. To close: Press the door closed until it engages. The outer door can be opened during a programme without interrupting it. ■ Inner door To open: Press door release button *2 and the door springs open. The door is locked throughout the programme. It can only be opened after the programme has finished. To close: Close the door firmly to engage the lock. Useful advice How to open the door during a power cut, see page 18. How to open the door if the machine is not connected: 1. Turn rotary control for emergency drain (A) a quarter turn anti-clockwise to the stop position. 2. Using a coin turn disc (B) anti-clockwise until the loading door springs open. 3. Turn...