The above cases require different types of intervention by the operator. The above problems must be repaired by means of services of the control discussed here. 13.1 Interruption of Automatic Operation In the course of automatic operation the following interventions cause interrupted state: – appearance of emergency stop state, e.g. by pressing the EMERGENCY STOP button, – effect of the RESET key or – changing the operation mode The interrupted state is indicated by caption INTD in the 3rd field

With Exec in effect the entire table is cleared. Clear Line Action Menu: When pressing the key the question CLEAR THIS LINE? can be seen in the bottom left part of general displaying area, together with Exec and Cancel 3.6 SETTING Screens actions in the menu bar, the meaning of which is the usual. With Exec in effect the selected line is cleared. Save Action: When pressing the key the program number can be entered into the bottom data input line. In case the input is terminated by any of the key

H1148 Budapest Fogarasi ut 7 : Letters: H1631 Bp. pf.: 26 F Phone: (+36 1) 467 63 00 F Fax:(+36 1) 363 6605 E-mail: nct@nct.hu Home Page: Contents Introduction ............................................................ 7 1 Operator’s Panel ....................................................... 8 1.1 The NC ControlPanel: DisplayUnitand DataInputKeyboard ................. 8 1.1.1DataInputKeyboard ............................................. 10 1.1.2 InformationDisplayed inGeneralDisplaying Are