Stimmen - 1, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
This new 10HP ZX Series lathe boasts a 22" swing over bed and comes standard with a 10" 3-jaw chuck with top reversing jaws and a 12" 4-jaw chuck. The 22" ZX Series Large Spindle Bore Lathe comes equipped with a 3-1/8" bore spindle supported by two tapered bearings and one ball bearing and a universal gear box with pitch threads in inches, metric, diametral and module. The universal gear box is dial controlled eliminating the need for changing end gears. The GH-2280ZX also comes standard with a follow rest and large capacity steady rest. STOCK NO. 900479 10M 09/06 ©2006 WMH TOOL GROUP, Inc. All Rights Reserved. jettools.com 22" x 80" ZX SERIES 10HP LARGE SPINDLE BORE LATHE 22" x 80" ZX SERIES STOCK NUMBER 321980 10HP LARGE SPINDLE BORE LATHE Model GH-2280ZX Swing Over Bed (in.) 22 Swing Over Cross Slide (in.) 13 ■ Uniquely designed exclusively by JET Swing Through Gap (in.) 29-1/2 ■ ISO 9001 certified manufacturer Length of Gap (in.) 12-1/4 ■ 3-1/8" bore spindle is supported by two tapered Distance Between Centers (in.) 80 and one ball bearing Spindle Bore (in.) 3-1/8 ■ Chrome molybdenum headstock gears are hardened, Spindle Mount D1-8 ground,and shaved Spindle Taper (with sleeve) MT-7(MT-5) ■ Universal gear box allows inch, metric, diametral, Number of Spindle Speeds 12 and module pitch threads, no change gears required Range of Spindle Speeds (RPM) 25-1,800 ■ Carriage features one-shot lubrication and Turcite-B Number of Longitudinal and Cross Feeds 122 on bed sliding surfaces Range of Longitudinal Feeds (in./rev.) .0015 - .0913 ■ T-slotted compound slide featuring a four-way tool post Range of Cross Feeds (in./rev.) .0006 - .0365 ■ One-piece cast iron base absorbs vibration allowing heavier Number of Inch Threads 61 cuts Range of Inch Threads 1-5/8 - 72 ■ High quality ANSI Class 50 wear-resistant cast iron Number of Metric Threads 24 bed ways are hardened and ground Range of Metric Threads (mm) .05 - 20 ■ Removable gap allows up to 23-5/8" diameter work on 16", 27-1/2" on 18" Maximum Tool Size (in.) 1 x 1 ■ Five position automatic carriage stop increases productivity Maximum Compound Slide Travel (in.) 5-1/8 Maximum Cross Slide Travel (in.) 10 ■ Attractive chrome control levers, dials, and knobs Maximum Carriage Travel (in.) 75 ■ Tolerance test certificate included Tailstock Spindle Travel (in.) 5 ■ Also available with collet closer, taper attachments, Tailstock Taper MT-5 and digital readouts Follow Rest Capacity (in.) 1/2 - 3-1/2 Steady Rest Capacity (in.) 3/8 - 7 Width of Bed (in.) 13-3/8 Overall Dimensions (in./L x W x H) 136-1/8 x 40 x 48-7/8 Motor 10HP, 230/460V, 3Ph, Prewired 230V Net Weight (lbs.) 7400 jettools.com...