Stimmen - 2, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
Except for the differences noted in this insert, all other content in the Model SB1039 Owner’s Manual applies to this machine. Before operating your new lathe, you MUST read and understand this insert, the entire Model SB1039 Owner’s Manual, and the Fagor DRO Owner’s Manual to reduce the risk of injury when using this machine. Keep this insert for later reference. If you have any further questions about this manual insert or the differences between the Model SB1039F and the Model SB1039, contact our Technical Support at (360) 734-1639 or email sales@southbendlathe.com. New & Changed Parts 15181518-11518-31518-2 1601 Motor: 5/2.5HP, 220V, 3-Ph, 60Hz Full-Load Current Rating: 14.3A Swing Over Bed: 14.17" Distance Between Centers: 40" Swing Over Cross Slide: 8.66" Swing Over Gap: 20.94" Spindle Nose to Gap: 6.46" Cross Slide Travel: 7" Compound Travel: 4" Spindle Nose: D1-5 Camlock Spindle Bore: 1.57" Taper Inside Spindle: MT#5 Taper Inside Tailstock: MT#3 Weight: 2420 lbs. Made in Taiwan to South Bend Specifications TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY WHILE USING THIS MACHINE: WARNING! ! MODEL SB1039F14" x 40" 16 SPEED LATHE 220V w/DRO MFG Date Serial No. 1. ead and understand manual before starting 2. Always wear appro ed eye protection. 3. Make sure the machine is connected to a grounded power source. 4. eep all guards in place. 5. DO NOT wear loose clothing, glo es, or jewelry; secure long hair and roll up long slee es 6. Disconnect power before service, maintenance, or adjustment 7. DO NOT oper te when tired or under the influence of drugs or alcohol. 8. Make sure the machine is properly adjusted/set up before starting 9. Change cutting fluid r gularly and avoid contact with skin. 10. Make sure workpiece is proper y and securely held in the chuck and has safe clearance through full rotation before starting the l the. 11. Ne er leave the chuck key in the chuck. 12. Ne er touch the chuck or workpiece when it is in motion. 13. Ne er leave the lathe running unattended. 14. Make sure long workpieces are proper y supported. 15. Always use the proper speed r te for the material you are turning 16. Do not allow children to have unsupervised access to the machine. 1618 REF PART # DESCRIPTION REF PART # DESCRIPTION 1518 PSB1039F1518 DRO ASSEMBLY FAGOR 2-AXIS 1518-1 PSB1014F2318-1 DRO DISPLAY FAGOR 20-iT 1518-2 PSB1037F2318-2 DRO X-AXIS SCALE FAGOR MKT-102 1518-3 PSB1039F1518-3 DRO Y-AXIS SCALE FAGOR MKT-22 1601 PSB1039F1601 MACHINE ID LABEL 1618 PSB1039F1618 MODEL NUMBER LABEL Copyright © June, 2011 by South Bend Lathe Co. WARNING: No portion of this manual may be reproduced without written approval. #BL14239 Printed in USA Model SB1039F MANUAL INSERT Mfg. Since 4/11 Product Dimensions Shipping Dimensions Electrical NEMA 15-20 Motors Main Coolant -2 Mfg. Since 4/11 MANUAL INSERT Model SB1039F Main Specifications Operation Info Swing Over Bed.................................................................................................................................. 14.17 in. Distance Between Centers...................................................................................................................... 40 in. Swing Over Cross Slide........................................................................................................................ 8.66 in. Swing Over Saddle............................................................................................................................. 13.75 in. Swing Over Gap.................................................................................................................................. 20.94 in. Maximum Tool Bit Size........................................................................................................................ 0.75 in. Compound Travel...................................................................................................................................... 4 in. Carriage Travel..................................................................................................................................... 36.5 in. Cross Slide Travel...................................................................................................................................... 7 in. Headstock Info Spindle Bore.......................................................................................................................................... 1.57 in. Spindle Taper.......................................................................................................................................... MT#5 Number of Spindle Speeds............................................................................................................................ 16 Spindle Speeds......................................................................................................................... 50 – 2570 RPM Spindle Type.......................................................................................