Stimmen - , Durchschnittliche Bewertung:
(
)
)
Hersteller: Philips
Dateigröße: 1.06 mb
Dateiname:
Unterrichtssprache:
Das Dokument wird geladen, bitte warten
 |
Das Dokument wird geladen, bitte warten
Anleitung Zusammenfassung
ENGLISH
Volume
C 3 Having finished the hairdrying, switch off
Introduction
1
the appliance.Then remove the
1
Use the shape volume brush to add
concentrator by pressing the release
maximum volume and body to your hair.
This new Philips Beauty Airstylist Quattro 1000
button and pulling the concentrator in the
The shape volume brush is suitable for straight
2
has been specially designed to give beautiful
direction of the arrow.
and wavy hair of any length.
styling results in a quick and easy way. In order to
Follow this procedure for all attachments.
get the best results, please read the instructions
◗ For longer lasting result you can apply some
1000 W
carefully before use.
Making loose curls in short and medium
mousse before styling your hair.
hair length
Important
5
Insert the brush into the hair.
We advise you to perform a curl test to
◗ Before you connect the appliance, check if
determine how long the brush should be held in
6
Switch the appliance on by selecting speed
the voltage indicated on the appliance
your hair to achieve a good result. Start with 8 to
setting ~ or 6.
corresponds to your local mains voltage.
10 seconds.You may have to hold the brush
◗ Keep this appliance away from water!
longer in your hair for tighter curls. Less tight
7
Brush against the direction of hairgrowth,
Do not use this product near or over water
curls will require less than 8 seconds.
touching the scalp with the brush pins.
contained in baths, washbasins, sinks etc.
If you use it in a bathroom, unplug the
1
Align the retractable bristle brush with
C 8 Rotate the brush away from the head.
appliance after use, since the proximity of
the styler. A 'click' will be heard.
The hair will be lifted and fall lightly back onto
water presents a risk, even when the
the head.
hairdryer is switched off.
2
Divide the hair into locks.
◗ For additional protection we advise you to
◗ You can eventually direct a cool airflow to
install a residual current device (RCD) with a
C 3 Take a lock of hair and wind it round the
the hair.
rated residual operating current not
brush. Make sure the end of the lock is
exceeding 30mA in the electrical circuit
wound in the required direction.
Polishing and shaping
supplying the bathroom. Ask your installer for
- Do not wind too much hair around the barrel
advice.
at a time.
C 1 Use the large cushion brush for polishing
◗ If the appliance overheats, it will switch off
- The thinner the lock of hair, the tighter the curl
and shaping your hair.
automatically. Unplug the appliance and let it
will be.
cool down for a few minutes. Before you
- Do not wind a lock of hair more than twice
Root lift
switch the appliance on again, check the grille
round the barrel.
to make sure it is not blocked by fluff, hair,
- Make sure the lock of hair is in contact with
1
Insert the brush pins in your hair until
etc.
the barrel.
they touch your scalp.
◗ Check the condition of the mains cord
regularly. Do not wind the mains cord around
◗ If you wind the hair at right angles to the scalp,
2
Switch the appliance on by selecting speed
you will give your hair optimum lift and volume.
setting ~ or 6.
Airstylist quattro 1000
the appliance.
◗ If the mains cord is damaged, the appliance
HP4694
should be discarded.
1
Switch the appliance on by selecting speed
C 3 Starting from the front, brush backwards
◗ Always ensure that the attachments are
setting ~ or 6.
and forwards across the centre parting.
completely dry (on the inside as well as at
◗
u
the outside!) before affixing them to the
2
Keep the brush in your hair until the hair
You can eventually direct a cool airflow to
www.philips.com
4222 002 25321
styler.
is warm to touch.
the hair.
◗ The barrel will become hot during use.
Prevent contact with the skin.
C ◗ As soon as the hair feels dry, you can direct a
Soft flowing hair
◗ Never block the air grilles.
cool airflow at the hair to fix your style for
◗ Keep the appliance away from children.
long-lasting results. Switch the appliance to 6
1
Lift the hair at the roots on the sides of
Replacement
◗ Always unplug the appliance after use.
1
(blue) for cool air so the curl cools down.
your head and follow the hair lengths with
2
◗ Wait until the appliance is cool before storing
the styler.
Always return the appliance to an authorised
it.
C 3 Switch the appliance off and remove the
This technique will tame stray ends and help
Philips service centre for examination or repair.
brush from your hair by pushing and
promote shine and softness.
Repairs by unqualified people could cause an
Before using the appliance
turning the bristle retraction knob in the
extremely hazardous situation for the user.
direction of the arrows.
◗ You can eventually direct a cool airflow to
◗ Before you start using the Airstylist, comb or
the hair.
Guarantee & service
brush the hair so that it is untangled and
C 4 If you have not used the cool airflow, leave
smooth.
the curls to cool down, before finishing by
Cleaning
If you need information or if you have a problem,
◗ The Airstylist is most effective when the hair
combing, brushing or fingercombing the
please visit the Philips Web site at
is slightly damp.When your hair is dry, slightly
hair into its final style.
1
Unplug the appliance.
www.philips.com or contact the Philips Customer
dampen your hair. Never use the appliance on
Care Centre in your country (you will find its
wet hair!
Making waves in long hair
2
Put the appliance in a safe place and let it
phone number in the worldwide guarantee
Always insert the mains plug into the wall socket
cool down.
leaflet). If there is no Customer Care Centre in
after having connected the accessories.
1
Take the ends of the hair and wind them
your country, turn to your local Philips dealer or
around the retractable bristle brush in the
3
Clean the appliance with a small brush or
contact the Service Department of Philips
Using the appliance
desired direction.
a dry cloth.
Domestic Appliances and Personal Care BV.
Hair drying
2
Switch the appliance on by selecting speed
Storage
setting ~ or 6.
C 1 Connect the concentrator onto the air
1
Unplug the appliance.
CLICK
styler. Make sure the arrows on the
3
As soon as the hair is warm to touch,
concentrator are in line with the arrows
switch the appliance off and carefully
2
Do not wind the mains cord round the
on the styler. A 'click' will be heard.
remove the brush from the hair.
appliance.
The concentrator allows you to easily dry your
hair.
◗ You can eventually direct a cool airflow to
3
Put the appliance in a safe place and let it
the hair
cool down.
C 2 Switch the appliance on by selecting ~ for
a gentle, warm airflow. Switch to speed
C 4 Leave the waves to cool down, before
C 4 The appliance can be stored by hanging it
setting 6 for a stronger and warmer
finishing by combing, brushing or finger
from its hanging loop.
airflow.
combing the hair into its final style.
...