Login:
Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung Triax, modell TSR 1000

Hersteller: Triax
Dateigröße: 1.08 mb
Dateiname: triax_tsr1000_manual_uk_001.pdf

Unterrichtssprache:en

Das Dokument wird geladen, bitte warten
Das Dokument wird geladen, bitte warten

Anleitung Zusammenfassung


• Use “Default Value” function to restore all channels in the “Tools” menu. 3.6 Restore channel list and settings To restore channel list and settings. 1. Enter the password. The default password is “0000”. 2. After entering the password correct a safety question will show up where you have to confirm first. 3. Select “Yes”, press [OK] to restore the last backup channel list, the current channel list will be erased. Select “No” press [OK] to cancel the operation. 17 Menu Operations 3.7 Save channel list and settings To save channel list and settings. 1. Enter the password. The default password is “0000”. 2. After entering the password correct a safety question will show up where you have to confirm first. 3. 3. Select “Yes”, press [OK] to save current channel list to backup channel list. Select “No” press [OK] to cancel the operation. 18 Menu Operations 4. Installation After selecting the installation menu you can see the window like beside. In “Installation” menu; 1. Press [Channel Up/Down] to select menu items among Antenna Setup, Single Search, Multi Search, TP Scan, Satellite List, TP List and Satellite Guide. 2. Press [OK] to enter the selected item. 4.1 Antenna Setup After selecting antenna setup another window will be opened. You can edit the following items: 1. Satellite: Press [Volume Up/Down] to switch satellites or press [OK] to enter satellite list to select directly. 2. LNB Configuration: Press [OK] to enter LNB configuration, you will see a window like beside: LNB Type: Press [Volume Up/Down] to switch among “Standard”, “User” and “Universal” mode. For Example: If you use a Dual LNB, then you should select “User” option in “LNB Type” and set the correct frequency in LNB type. 22K: Use [Volume Up/Down] to switch “ON” and “Off”. The 22KHz signal is used in KU universal LNBs to change between low band and high band.! Notice: After choosing LNB type “Universal” you cannot modify 22K. DiSEqC1.0: Use [Volume Up/Down] to switch the options of DiSEqC1.0 switches between Disable / LNB1 / LNB2 / LNB3 / LNB4. DiSEqC1.1: Use [Volume Up/Down] to switch DiSEqC1.1 option or press [OK] to enter DiSEqC1.1 option to select directly. The options of this item are: Disable / 1Cascade M1 Port1 / 1Cascade M1 Port2 / 1Cascade M1 Port3 / 1Cascade M1 Port4 / 1Cascade M2 Port1 / 1Cascade M2 Port2 / 1Cascade M2 Port3 / 1Cascade M2 Port4 / 1Cascade M3 Port1 / 1Cascade M3 Port2 / 1Cascade M3 Port3 / 1Cascade M3 Port4 / 19 Menu Operations 2Cascades Port1 / 2Cascades Port2 / 2Cascades Port3 / 2Cascades Port4 / 2Cascades Port5 / 2Cascades Port6 / 2Cascades Port7 / 2Cascades Port8 / 2Cascades Port9 / 2Cascades Port10 / 2Cascades Port11 / 2Cascades Port12 / 2Cascades Port13 / 2Cascades Port14 / 2Cascades Port15 / 2Cascades Port16. Positioner: Press [Volume Up/Down] to select between “None / DiSEqC1.2 / USALS”. Toneburst: Press [Volume Up/Down] to switch this function “On” or “Off”. Polarity: Press [Volume Up/Down] to switch between “Auto / H / V/ Off”. 0/12V: Use [Volume Up/Down] to switch “ON” and “Off”. 3. DiSEqC1.0: Use [Volume Up/Down] to switch the options of DiSEqC1.0 switches. Between Disable / LNB1 / LNB2 / LNB3 / LNB4. 4. TP Index: Use [Volume Up/Down] to select the desired transponder. 5. FTA Only: Press [Volume Up/Down] to select to scan only free channels or even scrambled channels. If you select “Yes” it will scan free channels only. 6. Scan Channel: Press [Volume Up/Down] to select to scan TV + radio channels, or just TV channels or just radio channels. 7. Scan Mode: You can select “Preset Scan” or “Network Scan” to scan preset transponders or network transponders of the selected satellite. 8. Search: Press [OK] to start scanning. In the lower part of the window the progress of scanning and the found channels are displayed. 4.2 Single Search After selecting “Single Search” you will see a window like beside: 1. In the “Satellite” item press [Volume Up/Down] to select the satellite which you want to scan or press [OK] to open the “satellite list” to select directly. 2 In the “FTA Only” item, press [Volume Up/Down] to select to scan only free channels or even scrambled channels. If you select “Yes” it will scan free channels only. 3 In “Scan Channel” item, press [Volume Up/Down] to select to scan TV + radio channels, or just TV channels or just radio channels. 4 In “Scan Mode” item you can select “Preset Scan” or “Network Scan” to scan preset transponders or network transponders of the selected satellite. 5 Move the highlight to “Search” and press [OK] button to start scanning. Bars are showing the progress of the channel scanning in the lower part of the window and the found channels are listed. 6 You can stop the scan with [MENU] button. 20 Menu Operations 4.3 Multi Search When you enter the “Multi Search” menu a window like the one beside will open. 1. On “Satellite” item press [OK] to open the satellite list. Then press [Channel Up/Down] to move the highlight and press [OK] to mark/unmark and [MENU] to finish the...

Dieses Handbuch ist für folgende Modelle:
Sat-TV-Receiver - TSR 1000 (1.08 mb)

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien