Stimmen - 4, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
Bad picture/blocking error. Signal to weak. Check if the aerial works for analouge reception. The front panel shows a channel number, but you can’t see anything from digital TV. The Mediamaster is not set in TV mode. If your system is connected by SCART leads, press 0. If this does not work, set the TV to its appropriate AV input. If your system is connected only by RF leads, set your TV to that channel you have tuned for digital terrestrial TV. The SCART connection has been made wrong or your TV has not selected the correct AV/EXT channel. Check SCART connections, making sure leads are firmly pushed into the sockets. Try manually selecting the AV/EXT channel on your TV. When the Mediamaster tries to find and store channels during the first installation, a message ‘no channels found’ is displayed or some channels are missing from the channel list. The aerial is not properly connected to the Mediamaster. The aerial is not pointing in the right direction. The aerial is not suitable for digital channels. The indoor aerial is not enough. There are no digital transmission. Check the aerial connector and the aerial installation. Check if you can see the analouge channels. Check that the aerial is pointing in the right direction. Check that the digital transmission are available in the aerea. Pressing ”0” does not switch be-The system is not connected by The TV Release function (0) will only tween a digital channel and an ana-SCART leads. work for SCART connected systems. logue channel. The system is RF connected but the TV is not tuned to its channel for digital terrestrial TV. There is interference on your digital The system is connected by RF Change the Mediamaster output terrestrial channels, an existing ter-leads and the output channel of the channel to a more suitable channel restrial channel or video channels. Mediamaster interferes with an ex-between 21-69. Or connect the sys isting terrestrial channel or video tem by SCART leads. channel. You can’t find all the channels you The signal to your aerial may be Try retuning your Mediamaster, fol think should be available. weak. lowing the relevant steps in this manual. If you are still missing chan- Your aerial may need adjusting or nels, your aerial may need adjusting. your local transmitter may not be Contact your dealer or Service Pro- working. vider. They will check this for you. There is no Welcome menu on the screen after you switched on the Mediamaster for the first time. The system is connected by SCART leads and the TV is not in AV/EXT mode. The system is connected by RF leads and the TV is not set to the channel tuned for digital terrestrial TV. If the system is connected by SCART leads, switch the TV to appropriate AV input. If the system is connected by RF leads, switch the TV to the channel for digital terrestrial TV. If you have not manually tuned in the TV you may do this first. Please look in the TV manaul for instructions. GB 30 PROBLEM SOLVING PROBLEM SOLVING Problem Possible causes What to do You made a video recording of a digital terrestrial channel and whole or parts of the programme was not recorded. The Mediamaster was not left on the appropriate channel. The system is connected by SCART leads and the VCR is not in AV/EXT mode. The system is connected by RF leads and the VCR is not set to the channel tuned for digital terrestrial TV. If you make a recording of digital terrestrial TV your Mediamaster has to be left on the channel you like to record. If the system is connected by SCART leads, switch the VCR to appropriate AV input. If the system is connected by RF leads, switch the VCR to the channel for digital terrestrial TV. If you have not manually tuned in the VCR you may do this first. Please look in the VCR manaul for instructions. The remote control is not working. Battery exhausted. Change the batteries (both. Remote control is incorrectly Aim the remote control at box. aimed. Check that nothing blocks the front panel. The Mediamaster is in standby Check if (.) is flashing on the front panel mode. display when you press a button. If not replace the batteries (both). You see the on-screen message. The Mediamaster can’t recognise Check that you are using the proper your smartcard. Smartcard. Check that the Smartcard Viewing card faulty. has been correctly inserted. If the problem persists, you may have a problem with the card. Contact your dealer or Service Provider. You have forgotten your secret PIN Contact your Service Provider. They will code. help you set it up again. CA Module is not working. CA module is not installed. Check that the CA module has been cor- CA module is not correctly inserted. rectly inserted. Contact your dealer or Service Provider. Please note! The first thing to do before sending the Media-master to service is to: 1: Perform ”Diagnostic” procedure in System Information menu. 2: Try downloading new software into the Mediamaster. With this procedure, the new software may solve the problem in the quickest an...