Login:
Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung Zenith, modell H2735DT

Hersteller: Zenith
Dateigröße: 1.61 mb
Dateiname:

Unterrichtssprache:en

Das Dokument wird geladen, bitte warten
Das Dokument wird geladen, bitte warten

Anleitung Zusammenfassung


20. CAPTION LOCK Set to 1 to restore previous caption On/Off state after TV turns off when set to 0, captions are always off when TV is initially turned on. 21. FUNCTION PRE Set to 0 to suppress CHANNEL PREVIEW FUNCTION menu with some pay per view systems. 22. FEATURE LEVEL Set to ZEN 1 for Zenith compatible remote control operation, set to 0 for PLbl for Zenith private label compatible remote control operation. Some of the functions shown above may not be available on your TV (such as FM). 206-3489-O PAGE 33 LT1500 QuickSet Programmer LT1500 QuickSet Programmer Use the LT1500 QuickSet Programmer to duplicate the TVs setup The optional QuickSet II Programmer (LT1500) allows custom setup and programming information to be quickly copied from a master TV into multiple television sets. Once learned from the master, setup data is retained in the LT1500 for future use and recall. When using the LT1500, operation will be easier if the TV set is connected to a good quality signal and operating with a stable picture displayed. To operate the LT1500, use the indicated keys on an HP602, LP702, or MBR3447 remote, or the front panel keys on the TV receiver. 1 2 3 1 2 3 4 5 Set up a master TV set using your remote and following the instructions in this operating guide. Set all features you wish to customize including the channel scan list, channel labels, and service menu setups. Connect the LT1500 to the master TV set using the cable provided with the programmer. Connect the cable between the MPI jack on the TV and the programmer. Connecting the programmer to the TV set automatically activates the programmer power- switching circuits. Once connected, check the “Status Indicator” LED on the programmer. The indicator should be flashing a green double-blink “heartbeat” pattern. If communications are good, the sign-on screen will be displayed on the TV screen as shown on the quick setup instructions which accompany the LT1500. If you intend to set the TV or programmer real-time clocks, note the clone clock and TV clock time settings, then press a key to proceed to the main clone menu. If you have previously stored a TV setup in a particular clone memory, it may be changed if desired by overwriting it with a new setup. There is no need for a separate memory clear operation. Item 1: Learn From TV Setups stored in programmer memory are nonvolatile and will be retained even after a battery change. Press (1) then ON/OFF, POWER, or ENTER to begin the learning process. Alternatively, use the TV front panel CHANNEL UP or CHANNEL DOWN keys to highlight your choice, then press ON/OFF, POWER, or ENTER to activate. The next screen will allow you to choose which of the available memories will be used to store this TV setup. With four memories available, four different TV setups can be stored in the LT1500. Using the on screen menu, choose a memory or choose to return to the main selection menu, then press ON/OFF, POWER, or ENTER to activate the selection. The next screen gives you one last opportunity to check the versions of TV and clone setups. Press ON/OFF, or POWER to activate the learning cycle or any other key to return to the selection menu to make other choices. Once the process has begun, the TV screen will display the ”LEARNING IN PROGRESS” message. Please wait until the process is completed. When the TV screen displays “LEARNING COMPLETED”, press any key to end the learning process and return to the clone selection menu. A slow flashing green light indicates there is a problem with the communications between the TV and the programmer. In this case, check for a damaged cable, poor contacts, or other connection troubles. If the status indicator is red, the programmer batteries are low and should be replaced. Use 4 good quality alkaline AA batteries. P A GE 34 206-3489-O Clone Selection Menu Choices Clone Selection Menu Choices Use the LT1500 QuickSet Programmer to duplicate the TVs setup 1 2 3 4 5 6 1 2 1 2 1 2 3 Item 2: Teach the TV Press (2) then ON/OFF, POWER, or ENTER to begin the teaching process. Alternatively, use the TV front panel CHANNEL UP or CHANNEL DOWN keys to highlight your choice, then press ON/OFF, POWER, or ENTER to activate. The next screen will allow you to choose which of the 4 available memories will be copied to this TV. Press the desired memory number, then ON/OFF, POWER, or ENTER to begin the teaching process. Alternatively, use the TV front panel CHANNEL UP or CHANNEL DOWN keys to highlight your choice, then press ON/OFF, POWER, or ENTER to begin. Using the on screen menu, choose a memory or choose to return to the main selection menu, then press ON/OFF, POWER, or ENTER to activate the selection. The next screen gives you one last opportunity to check the versions of TV and clone setups . Press ON/OFF, or POWER to activate the teaching cycle or any other key to return to the selection menu to make other choices. The TV screen will display the ”TEACHING IN PROGRESS” message. Please wait until the proces...

Dieses Handbuch ist für folgende Modelle:
Sat-TV-Receiver - 3235DT (1.61 mb)
Sat-TV-Receiver - 3635DT (1.61 mb)

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien