Stimmen - 5, Durchschnittliche Bewertung: 4.8 ( )

Hersteller: Topfield Dateigröße: 1.59 mb Dateiname: Unterrichtssprache:

G. RF Channel Select a UHF channel by using , buttons. The default UHF channel is CH36. When you change the UHF channel number, you must also change to the same value on the TV. If you do not, there will be no picture and sound. 19 MENU OPERATIONS OSD Transparency Adjust the OSD transparency of all the menus. The available levels are ranging from 0% to 50%. Info Box Display Time Adjust the time-out of the Info Box. Set the period of time that the Info Box is displayed on screen. The adjustable time is 0 to 30 seconds, No info box and Never Hide. Info Box Position Adjust the position of the Info Box. It allows you to change the position by using , buttons. 20 MENU OPERATIONS Organizing Services This mode can be used to rename, reorder, lock, hide and delete TV Services. A. Browse Press button. Now, browsing through the Organizing Services is possible. Press assigned buttons on the help message. B. Rename Use , buttons to select Rename item and press button to move the cursor to the Service List. Press button to display keyboard, and rename the service. After renaming it, be sure to save it by pressing button at Save item. C. Move You can reorder and move the service to the preferred position. Mark the desired service to move and press button. Use , buttons to choose the Move mode. D. Lock You can restrain and lock the services. From here, locking (and later unlocking) services in any of the lists is possible e.g. in order to prevent children from watching it. If a locked service is selected, you should enter the PIN code in order to enjoy it. E. Skip You can hide and skip the services. In order to unlock the skip function, press button on the skipped service. The skipped services will not be visible on the service list. 21 MENU OPERATIONS F. Delete Press button to delete services. The delete function differs from the skip function as it deletes the service completely. Whereas, the skip function just makes the service invisible. NOTE: Deleted services are permanently deleted. The only way to recover them is to perform a new service search. G. Sort You can sort and rearrange the service list. Organizing Favorites This mode is helpful in adding and deleting services to and from the favorite group. Under the menu Organizing Favorites, there are three different modes: Fav List , Fav Services and TV or Radio Services List. On the Fav List mode, four standard lists are selected as the default menus: News, Sports, Movie and Music. Up to 30 lists including these lists can be added and renamed. When deleting a service, select a service in the Fav Services section and press the assigned button on the help message. To add services into Favorites, locate the cursor to the desired service in Services List and press button. To delete a service from Favorites, locate the cursor to the service in Fav Services and press button. 22 MENU OPERATIONS Installation LNB Setting The Low Noise Block down Converter (LNB) amplifies the signal received by the satellite dish and lowers the frequency of the signal. The signal is then fed from the LNB at the dish via cable to the STB. For the LNB Setting, move the cursor to Installation item and press button. Then, move the cursor to the LNB Setting item and press button. A. Satellite Name Press button to display the Satellite List. The list of Satellite is put in alphabetical order. Select one of the preprogrammed satellites that corresponds to the direction of the antenna. If the desired satellite name is not in the list, then select Other. B. LNB Frequency Select the L.O. Frequency of the LNB. The LNB Frequency of 5150, 9750, 10600, 10750, 11250, 11475, 9750/10600, 9750/10700 or 9750/10750 can be selected by or button. Also you can insert LNB frequency by using Numeric key on the RCU. E. LNB Power Select LNB power On to output the LNB voltage. F. 22 KHz If you are using a 22 KHz tone switch box, make 22 KHz tone switch enable or disable to select LNB or antenna. NOTE: If the LNB Frequency is set to Universal LNB (9750/10600, 9750/10700 or 9750/10750), it is not possible to set 22KHz because high or low band is selected by 22KHz. G. DiSEqC 1.1 The STB is designed to be DiSEqC 1.1 compatible. This allows multiple antennas to be connected to the STB at the same time. If you are using two or more fixed antennas or LNBs, then it is recommended to use a DiSEqC 1.1 switch. If you use a DiSEqC 1.1 switch only, it is possible to connect up to 4 antennas. Set the DiSEqC 1.0 to Disable and select an item in DiSEqC1.1. 23 MENU OPERATIONS If you use a DiSEqC1.1 switch and DiSEqC1.0 switches, it is possible to connect up to 16 antennas. Connect the DiSEqC1.1 switch to the LNB input and connect the DiSEqC1.0 switches to the DiSEqC1.1 switch. Set the DiSEqC1.1 item and DiSEqC1.0 item according to the antenna configuration. For example, set DiSEqC1.1 to 2 of 4 and DiSEqC1.0 to 3 of 4 to select A7. H. DiSEqC 1.0 The STB is designed to be DiSEqC 1.0 compatible. This allows multiple antennas to be connected...

Herunterladen

Geben Sie zwei Ziffern: