Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Dish Network Dateigröße: 2.87 mb Dateiname: Unterrichtssprache:

Tip: This procedure explains how to find out what the device code is that you set for each remote control mode. Tip: Some of the features described in this section may not work with your VCR or DVD player. If a remote control button is not described in this user guide, it will not work with the device you want to control. Page 57 Control Other Devices with the Remote Page 57 Mute Button Press the MUTE button to turn off the sound. Press it again to restore the sound. Volume Button Press the minus (-) side of this button to lower the sound volume. Press the plus (+) side of this button to raise the sound volume. Select Button The SELECT button works as the Enter button for a TV. Up/Down (Arrow) Buttons Use the UP/DOWN ARROW buttons to change channels on the TV. Recall Button Press the RECALL button to return to the last channel you were watching. Press it again to switch between the last two channels that you watched. Number Buttons Use the NUMBER buttons to enter numbers in a menu, or to go directly to a new channel. Control a VCR or a DVD Player Some of the features described below may not apply to the device. See your device owner’s manual for details about its features. If a remote control button is not described in this section, it does not work in VCR mode. VCR Mode Button To use the remote to operate a VCR or DVD player, first set up the remote, then press the VCR mode button to set the remote to VCR mode. The VCR mode button’s back light turns ON to show that the remote is set to VCR mode. Make sure to keep the remote in VCR mode to use the buttons as described in this section. Tip: To operate another device such as a VCR, you must first set up the remote to control the VCR, and then press the VCR mode button on the remote. Page 58 Chapter 3 Using the System You must use the remote control’s VCR mode to control a DVD player. Power Button Press the blank POWER button to turn the VCR ON or OFF. VCR/DVD Buttons • The RIGHT ARROW button is used to play, or to resume playing, a videotape or DVD. • The UP ARROW button is used to stop a videotape or DVD. • The DOWN ARROW button is used to pause a videotape or DVD. Press this button or the SELECT button to restart the videotape or DVD. • The LEFT ARROW button is used to rewind a videotape or reverse a DVD. • Press the RIGHT ARROW button to forward a videotape or DVD. • Press the RECORD button to start recording on a VCR. Page Up and Page Down Buttons Use the UP ARROW and DOWN ARROW buttons to change channels on a VCR. Number Pad Buttons Use the NUMBER PAD buttons to enter numbers in a menu. Page 59 Control Other Devices with the Remote Page 59 Control a Tuner or Amplifier Some of the features described below may not apply to your tuner or amplifier. See the device owner’s manual for details about the device’s features. If a remote control button is not described in this section, it does not work for a tuner or amplifier. AUX Mode Button To use the remote to operate a tuner or amplifier, first set up the remote to control the device, then press the AUX mode button to set the remote to AUX mode. The AUX mode button’s backlight turns ON to show that the remote is set to AUX mode. Make sure to keep the remote in AUX mode to use the buttons as described in this section. Power Button Press the blank POWER button to turn the tuner or amplifier ON or OFF. Select Button This SELECT button works as the Input Select button for a tuner or amplifier. Up/Down (Arrow) Buttons Use UP/DOWN ARROW buttons to change channels on the tuner or amplifier. Mute Button Press the MUTE button to turn off the sound. Press it again to restore the sound. Volume Button Press the minus (-) side of this button to lower the sound volume. Press the plus (+) side of this button to raise the sound volume. Switching Between TV and Device Volume Control When you set up the remote to control a TV, the MUTE and VOLUME buttons control the TV volume. However, if you want to use the AUX mode to control a tuner or amplifier and the device has a volume setting, you can set up the remote to control the device’s volume instead of the TV volume. To set the remote to control the device’s volume: 1. Press and hold the AUX mode button for four seconds, and then let go of it. The AUX mode button will blink. 2. Press the POUND (#) button. Page 60 Chapter 3 Using the System 3. Press the plus (+) side of the VOLUME button. 4. Press the 0 number button. 5. Press the POUND (#) button. The AUX mode button flashes three times. 6. Press the SAT mode button. 7. Press the plus (+) and minus (-) sides of the VOLUME button. The device’s volume changes and the aux mode button lights instead of the TV mode button. To set the remote back to control the TV volume: 1. Press and hold the TV mode button for four seconds, and then let go of it. The TV mode button will blink. 2. Press the POUND (#) button. 3. Press the plus (+) side of the VOLUME button. 4. Press the 0 number button. 5. Press the POUND (#) button. The TV mode butto...

Herunterladen

Geben Sie zwei Ziffern: