Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
8. Switch to the TV Air mode using the TV remote control and then select a TV channel you want to watch. 9. Connect a set of audio cables between the AUDIO OUT jacks on the STB and the AUDIO (LINE, AUX) INPUT jacks on the HI-FI SYSTEM. Connecting the Set-Top Box to Your TV (using a RCA CABLE) TV Rear Panel From Cable/ Antenna Source Viewing the STB programs Viewing the Free-to-Air or CABLE programs Using a HI-FI SYSTEM for sound Connecting the Set-Top Box 9 Connecting the Set-Top Box to Your TV and VCR You can view a STB program and record it using a VCR at the same time. From Cable/ Antenna Source TV Rear Panel VCR Rear Panel 1. Connect a parabola antenna cable to the LNB IN jack. Connect an AIR or Cable Box Antenna out terminal cable to the RF IN jack. 2. Connect between the RF OUT jack on the STB and the ANT INPUT (RF INPUT) jack on the TV. 3. Connect a set of audio, video cables between the AUDIO, VIDEO OUT jacks on the STB and the AUDIO, VIDEO INPUT jacks on the VCR. Recording a program from STB • Turn on the VCR to record a program from the STB. • When you record a STB program of a specific time, set the Wakeup Time and Service No. of the STB Time Setting Mode to meet the starting time of the program and then do ON • Time and Recording Time of the VCR Time Setting Mode. (See your VCR manual for VCR ON Time and setting the Recording Time.) Viewing a program from the STB, Free-To-Air or CABLE • See “Connecting the Set-Top Box to your TV (using a RF CABLE).” STANDBY TV/SAT (Reserved) TV/RADIO MUTE MENU CURSOR OK P+/PHELP EPG RCL (Recall) RS-101N NUMBER BUTTONS INFORMATION (RED) SOUNDTRACK (GREEN) SUBTITLE (Reserved) PAUSE (BLUE) EXIT V+/VTIME (WHITE) Remote Control Unit 11 1 2 3 4 5 6 7 8 9 NUMBER BUTTONS Press to select a service, enter your PIN Code or Numbers on the menu. INFORMATION (RED) Press to display the program information box on the screen. This button functions same as the RED button on the menus. SOUNDTRACK (GREEN) Press to display the soundtrack list for the current service. And this button functions same as the GREEN button on the menus. SUBTITLE (Reserved) PAUSE (BLUE) Press to pause the moving picture for seeing more careful. And this button functions same as the BLUE button on the menus. TIME (WHITE) Press to display the current time on the screen. Press to reserve services on the Information box or EPG. And this button functions same as the WHITE button on the menus. EXIT Press to return to the previous menu and screen. V+/V- Volume up/down buttons. Press to increase or decrease the volume. STANDBY Press to switch between Operation and Standby modes. 10 13 11 12 14 15 16 17 18 19 TV/SAT (Reserved) TV/RADIO Press to switch between TV and Radio modes. MUTE Press to temporarily cut off the sound. MENU Press to display the Main Menu on the screen or return to the screen from a sub menu screen. CURSOR Press to move the highlight bar for selecting options on the menus. And this button is used to change services (up/down) and increase or decrease the audio volume. OK Press to display the service list. This button is used to select the item on the menus. P+/P- Program up/down buttons. Press to tune to the next or previous service. Press to move up or down pages on the menus. HELP Press to display the help box on the screen. EPG Electronic Program Guide button displays the TV/Radio Program guide. RCL (Recall) Press to select the channel that was previously viewed. • Please note : The design of Remote Control Unit may be changed without notice in advance. Guide of Functions Guide of Functions Information Box (I-Plate) The details of Service Part and Event Part are automatically displayed on the I-Plate when pressing the( )button or changing services. I-Plate is divided into Service Part and Event Part. SERVICE-PART (Left side of the box) Service Part consists of the following item : • I-Plate icon, Current Time • Service Name, Service Number, icon • Subtitle, Teletext, Scrambling Service Symbol (These are automatically displayed when the broadcasting station provides appropriate information.) • Signal Quality Bar EVENT-PART (Right side of the box) EVENT PART consists of the following items: • Event name, Event duration time • Description of event, State of reserved event Event Part shows the current and next event information. button : Use to move from the current event information to the next event information. button : Use to move from the next event information to the current event information. When the Help( )button is pressed under I-Plate display, the help window will appear on the screen. The Help window shows the extended current event information, including: Satellite Name, Frequency, Polarization, Symbol Rate, FEC... The detailed information for the event can be displayed by pressing the Help( )button in the I-Plate with event data displaying mode. You can reserve the program in the event data display mode by using the Time( )button. When the current data is displaying on the screen, y...