Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
••Since the alarm goes off if you don’t press any button for 30 minute, the alarm will stop working automatically. •• If you set the clock and alarm, you can check the time and alarm icon ““ by pressing ALARM although the unit is stand by mode. ••If you activate the alarm, the alarm icon “ “ will appear in the display window. ••If you deactivate the alarm, the alarm icon ““ will disappear in the display window. ••Alarm function only works when the unit is turned off. ••If the time you set is up, the unit will be turned on automatically. ••After alarm function works, you can turn it off by pressing ALARM or P/1. ••You can only set 12 : 00. (for an PM display) ,,Note Sleep Timer Setting While listening to music or radio, press SNOOZE/ SLEEP repeatedly to select delay time between 10 and 180 minutes. After delay time, the unit will turn off. (You can see the following order, 180 -> 150 ->120 -> 90 -> 80 -> 70 -> 60 -> 50 -> 40 -> 30 -> 20 -> 10) To cancel the sleep function, press SNOOZE/SLEEP repeatedly until the display window get bright. ••You can check the remaining time before the unit turns off by pressing SNOOZE/ SLEEP. ••Sleep function will work after dimmer function. ,,Note Radio Operations Antenna Connection Connect the FM wire antenna to FM antenna connector. 1. Press P/1 repeatedly until FM appears in the display window. The last received station is tuned in. 2. Auto tuning : Press / for about 2 seconds until the frequency indication starts changing, then release. scanning stops when the unit tunes in a station. Manual tuning: Press / repeatedly. 3. Adjust the volume by pressing - / + (VOLUME) . Presetting the Radio Stations You can preset 10 stations for FM. Before tuning, make sure that you have turned down the volume. 1. Press P/1 repeatedly until FM appears in the display window. 2. Select the desired frequency by using / . 3. Press and hold D/Pr . A preset number will blink in the display window. 4. Press / to select the preset number you want. 5. Press D/Pr. The station is stored. 6. Repeat the steps 2 to 5 to store other stations. 7. To listen a preset station, press D/Pr and then / to select a preset station. ••If all stations have already been preset, “FULL” will appear in the display window for a moment and then a preset number will blink. To change the preset number, repeat the steps 4-5. ••You can not delete preset stations. ••Although all stations were preset, you can preset a station by overwriting the previous station. ••While listening to radio if you press and hold D/Pr , a preset number you listened to lastly will blink first to overwrite the previous station. ••While listening to a preset station if you want to change it’s preset number at a same frequency, press and hold D/Pr. And then change a preset number by pressing / . ,,Note Advanced Operation Listening to music from your external device The unit can be used to play the music from many types of external device. (Portable cable is not supplied as an accessory with this unit.) 1. Connect the external device to the PORT.IN connector of the unit. 2. Turn the power on by pressing P/1. 3. Select the PORT (PORTABLE) function by pressing P/1. 4. Turn the external device on and start playing it. 14 Troubleshooting 3 Troubleshooting 3 Troubleshooting Troubleshooting Problem Correction No Power. yy Plug in the power cord. yyCheck the condition by operating other electronic devices. No sound. Press P/1 and check the selected function. Radio stations cannot be tuned in properly. yyAdjust its position. yyTune to the station manually. yyPreset some radio stations, see page 13 for details. iPod/iPhone does not work. Connect iPod/iPhone to the unit correctly. Clock does not displayed. Connect iPod/iPhone to the unit correctly. 15 Appendix 4 Appendix 4 Appendix Trademarks and Licenses “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone may affect wireless performance. 16 Appendix 4 Appendix Specifications General AC adapter requirements DC 12 V 01. 5 A, 100 - 240 V, 50/60 Hz Power consumption 18 W Dimensions (W x H x D) (156 x 87 x 67. 7) mm Net Weight (Approx.) 0. 57 kg Operating temperature 5 °C to 35 °C (41 °F to 95 °F) Operating humidity 5 % to 90 % Bus Power Supply iPod/iPhone 5V 01A Inputs PORT. IN 500mV (3.5 mm stereo jack) Tuner FM Tuning Range 87.5 MHz to 108.0 MHz or 87.50 MHz to 108.00 MHz Amplifier Output Power 5 W X 1ch (8. at 1kHz) T.H.D 10 % Speakers Type built-in Impedance Rated 8 . Rated Input Power 5 W Max Input Power 10 W yyDesign and specifications are subject to change without notice. Handling the Unit When shipping the unit Please save the original shipping carton and packing ma...