Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Handys - LG Pocket Photo PD233 (1.92 mb)
Handys - LG Pocket Photo PD233 (1.92 mb)
Handys - LG Pocket Photo PD233 (1.92 mb)
Anleitung Zusammenfassung
For more information, see “About LED indicator” on page 20. ,Note STEP 2 Charging Battery This device uses built-in battery. Before using it, charge the battery in full. (Refer to below) Battery charging time : 1.5 hours Checking the charging status with button yCharging : / 100 % : (When power-off ) y10 % : flashes for about 3 sec. y0 % : flashes for about 30 sec. and turns off. yLG Pocket Photo is always charged when connected to the power supply except for being printed. Power On / Off On : Press and hold for 4 sec. Off : Press and hold for 2 sec. yWhen turning the device on, the button flashes for 5 sec. Then printing is available. yThe LED indicator ( button) shows the device condition. For more information, see “About LED indicator” on page 20. ,Note STEP 2 Charging Battery This device uses built-in battery. Before using it, charge the battery in full. (Refer to below) Battery charging time : 1.5 hours Checking the charging status with button yCharging : / 100 % : (When power-off ) y10 % : flashes for about 3 sec. y0 % : flashes for about 30 sec. and turns off. yLG Pocket Photo is always charged when connected to the power supply except for being printed. 8 Charger (AC Adapter) yModel : MCS-01ET yManufacturer : TEN PAO INTERNATIONAL LTD. yInput : 100 - 240 V ~, 50 / 60 Hz yOutput : 5 V 01.2 A yHandle with care during charging to prevent electric shock. yDo not place near heating appliance. yDo not disassemble or deform. yDo not give shock on. yAvoid too high or low temperature or humidity. >Caution yYou can connect the device to PC using the supplied USB cable, but charging time can be longer. yThe operating time on battery may vary depending on the battery status, operational status and environment conditions. yWhen the battery is discharged, printing is available after charging it for more than 10 min. (Charge in full to print in a row.) ,Note Charger (AC Adapter) yModel : MCS-01ET yManufacturer : TEN PAO INTERNATIONAL LTD. yInput : 100 - 240 V ~, 50 / 60 Hz yOutput : 5 V 01.2 A yHandle with care during charging to prevent electric shock. yDo not place near heating appliance. yDo not disassemble or deform. yDo not give shock on. yAvoid too high or low temperature or humidity. >Caution yYou can connect the device to PC using the supplied USB cable, but charging time can be longer. yThe operating time on battery may vary depending on the battery status, operational status and environment conditions. yWhen the battery is discharged, printing is available after charging it for more than 10 min. (Charge in full to print in a row.) ,Note STEP 3 Inserting Photo Paper 1. Open the Paper insert door. 2. Unwrap the pack of the photo papers. 3. Slide Smart Sheet (Blue) and photo papers together into the Paper insert slot. Smart Sheet will be ejected automatically before first printing. • Do not insert more than 1 pack (10 Photo papers and 1 Smart Sheet). Otherwise 2 papers may be ejected at once or paper jam may occur. • Refill the device after using up the papers in. • Do not push the papers deeper into Paper insert slot. ZINKSmart Sheet with Barcode side down Photo Paper with White side up Cleaning printer head using Smart Sheet Smart Sheet cleans printer head and calibrates colors on photo. Keep the best print quality by using it repeatedly. 10 Paper Jam Solution Do not pull the paper out. Turn the device off and on again, the paper will be ejected automatically. If this problem is not solved, please refer to “Troubleshooting”. yDo not forcefully pull the paper out during printing. It may result in malfunction. yDo not damage or bend the papers. yUsing soiled paper may result in malfunction. yUsing photo papers from other company may result in malfunction or paper jam. yDo not place inside a car or, expose to direct sunlight or moisture. yDo not leave in a place where the temperature or humidity is too high or low. It may reduce the quality of the printed photo. >Caution yHandle with care when you touch the paper not to get dirt on. yEnsure to use the papers within its valid date. yOnce unpacked, the papers may begin to curl up after a period of time. It is recommended to use them as soon as possible. ,Note STEP 4 Installing App Installing App for Android phone From Play Store (Android market) Search for “LG Pocket Photo”. Using QR code Scan the QR code on the product box or the cover of this manual. Paper Jam Solution Do not pull the paper out. Turn the device off and on again, the paper will be ejected automatically. If this problem is not solved, please refer to “Troubleshooting”. yDo not forcefully pull the paper out during printing. It may result in malfunction. yDo not damage or bend the papers. yUsing soiled paper may result in malfunction. yUsing photo papers from other company may result in malfunction or paper jam. yDo not place inside a car or, expose to direct sunlight or moisture. yDo not leave in a place where the temperature or humidity is too high or low. It may reduce the quality of the prin...
Dieses Handbuch ist für folgende Modelle:Handys - PD233 (1.95 mb)
Drucker - PD233 Pocket Photo (1.95 mb)