Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
1-touch dialing > On — to activate speed dialing. To set up speed dialing, see “1-touch dials,” p. 36. To dial, press and hold the corresponding number key. Call waiting > Activate — to set the network to notify you of an incoming call while you have a call in progress (network service). See “Call waiting,” p. 21. Summary after call > On — to briefly display the approximate duration and cost (network service) of the call after each call. Send my caller ID (network service) > Yes, No, or Set by network. Line for outgoing calls (network service) — to select the phone line 1 or 2 to make calls, if supported by your SIM card. 40 Copyright © 2005 Nokia S e tti n g s ¦ Phone Select Menu > Settings > Phone and from the following options: Phone language — to set the display and writing language Memory status — to view the free memory and the used memory in Gallery, Messages and Applications Automatic keyguard — to set the keypad of your phone to lock automatically after a preset time delay when the phone is in the standby mode and no function of the phone has been used. Select On, and you can set the time from 5 seconds to 60 minutes. Security keyguard — to set the phone to ask for the security code when you unlock the keyguard. Enter the security code, and select On. When the keyguard is on, calls still may be possible to the official emergency number programmed into your device. Cell info display > On — to receive information from the network operator depending on the network cell used (network service) Welcome note — to enter a welcome note to be shown briefly when the phone is switched on Operator selection > Automatic — to set the phone automatically to select one of the cellular networks available in your area. With Manual, you can select a network that has a roaming agreement with your home network operator. Confirm SIM service actions — see “SIM services,” p. 64. Help text activation — to select whether the phone shows help texts Start-up tone — to select whether the phone plays a start-up tone when the phone is switched on ¦ Connectivity You can connect your phone to compatible devices using an IR connection. You can also define the settings for packet data dial-up connections. Infrared You can set up the phone to send and receive data through its infrared (IR) port. To use an IR connection, the device with which you want to establish a connection must be IrDA compliant. You can send or receive data to or from a compatible phone or data device (for example, a computer) through the IR port of your phone. Do not point the IR beam at anyone's eyes or allow it to interfere with other IR devices. Infrared devices are Class 1 laser products. Nokia 6101 and Nokia 6102 User Guide 41 Copyright © 2005 Nokia S e tti n g s When sending or receiving data, ensure that the IR ports of the sending and receiving devices are pointing at each other and that there are no obstructions between the devices. To activate the IR port of your phone to receive data using IR, select Menu > Settings > Connectivity > Infrared. To deactivate the IR connection, select Menu > Settings > Connectivity > Infrared. When the phone displays Deactivate infrared?, select Yes. If data transfer is not started within 2 minutes after the activation of the IR port, the connection is cancelled and must be started again. IR connection indicator When is shown continuously, the IR connection is activated, and your phone is ready to send or receive data through its IR port. When blinks, your phone is trying to connect to the other device, or a connection has been lost. Packet data (EGPRS) Enhanced general packet radio service (EGPRS), packet data, is a network service which allows mobile phones to send and receive data over an Internet protocol (IP)-based network. It enables wireless access to data networks such as the Internet. The applications that may use packet data are MMS, browsing sessions, e-mail, remote SyncML, Java application downloading, and the PC dial-up. To define how to use the service, select Menu > Settings > Connectivity > Packet data > Packet data connection. Select When needed to set the packet data connection to be established when an application needs it. The connection will be closed when the application is terminated. Select Always online to set the phone to automatically connect to an packet data network when it is switched on. indicates a packet data connection. Modem settings You can connect the phone using an IR or a data cable (CA-42) connection to a compatible PC, and use the phone as a modem to enable packet data connectivity from the PC. To define the settings for connections from the PC, select Menu > Settings > Connectivity > Packet data > Packet data settings > Active access point, activate the access point you want to use, and select Edit active access point. Select Alias for access point, and enter a nick name for the currently selected access point. Select Packet data access point, and enter the access point name (APN)...
Dieses Handbuch ist für folgende Modelle:Handys - 6102 (2.45 mb)