Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Equalizer—Select an equalizer set or create a custom set of your own. End call—Terminate the call. New call—Place a new call. Phone book—Display the phone book menu. Menu—Return to the main menus. Mute—Mute the current call. You can hear the other person but they cannot hear you. Unhold—Activates the held call. With one call active and another on hold Select Options when one call is active and another is on hold to display the following options: Record—Record the active phone conversation. Equalizer—Select an equalizer set or create a custom set of your own. End call—Terminate the active call. End all calls—End all calls. Conference—Connect all parties in a conversation. Touch tones—Enter touch tones manually or recall a string from your phone book. Phone book—Display the phone book menu. Menu—Return to the main menus. Mute—Mute the current call. You can hear the other person but they cannot hear you. Swap—Switch from the active call to the one on hold. Transfer calls—Transfer your calls (on hold or otherwise) to another number. •CALL WAITING If supported by your wireless provider, call waiting notifies you of an incoming call while you are in a call. You can then accept, reject, or ignore the incoming call. When you receive an incoming call 1At first, the name or number appears in the display. After a few seconds, Call 2 appears below Call 1 in the display. 2Select Answer or press the Talk key to pick up the call. The first caller is put on hold and Swapped appears in the display. If you do not pick up the call within 30 seconds, the call is dropped. Switch between calls Select Swap or press the Talk key. End the active call Press the End key. End both calls Select Options > End all calls. Reject a waiting call Select Options > Decline call. Place a new call with one on hold •While in a call, enter the number for the second call and press the Talk key. The first caller is put on hold. •Switch between the two calls by selecting Swap or pressing the Talk key. •End the active call by pressing the End key. •To end both calls, select Options > End all calls. •SEND OWN CALLER ID WITH NEXT CALL You can prevent your number from being displayed on the receiving party’s caller ID. This feature is network dependent and works on a call-by-call basis. Contact your wireless provider for more information. •CALL FORWARDING Call forwarding tells your network to redirect incoming calls to another number. Note: Call forwarding is network dependent and may not work the same in all networks. Contact your wireless provider for availability. Activate call forwarding 1From the menus, select Settings > Call settings > Call forwarding. 2Select one of the following options: Forward all voice calls—Forward all calls to the number you specify. Forward when not able to take calls—Forward calls that are not picked up. You can also set a delay before forwarding takes place. Forward all fax calls—Forward all fax calls to a fax mailbox. Forward all data calls—Forward all data calls to a data mailbox. Cancel all call forwarding—Cancel any call forwarding options you may have set. 3Select Activate. 4If required, select the destination to which your calls will be forwarded (either To voice mailb. or To other no.). 5Enter the number to which your calls, data, or other information will be forwarded and select OK. Your phone calls the network to activate the feature you have requested. The network sends a confirmation note when the feature has been activated successfully. Cancel call forwarding From the menus, select Settings > Call settings > Call forwarding > Cancel all call forwarding. Note: Cancel all call forwarding may affect your ability to receive voice mail messages. Contact your wireless provider for specific details. •AUTOMATIC REDIAL Occasionally, your network may experience heavy traffic, resulting in a “fast” busy signal when you dial. With automatic redial activated, your phone redials the number up to 10 times, and notifies you once the network becomes available. 1From the menus, select Settings > Call settings > Automatic redial. 2Select On to activate, or Off to deactivate. •VOICE DIAL You can select up to 10 entries in your phone book to dial by voice. Before you can do this, you need to assign each entry a “voice tag.” Notes about voice tags •Voice tags can be no longer than 1.5 seconds. •You cannot use voice dial while in a call. •Select Quit to abort recording the voice tag. •Choose a quiet location for recording voice tags. •Unique tags are best. For example, “John Smith, work.” •Avoid pauses or silence as you record the voice tag. •If memory is full, Delete an existing voice tag? appears in the display. Select OK, scroll to locate a tag to delete, and then select Delete. Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances. Assign a voice tag 1At the start screen, press either scroll key to display the entries in your p...