Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
To install the SIM or USIM card and battery, 1 If the device is on, press and hold [ ] and select Power off >OK to turn it off. 2 Remove the back cover. Be careful not to damage your fingernails when you remove the back cover. 3 Insert the SIM or USIM card with the gold-coloured contacts facing down. Assembling 11 4 Insert the battery. 5 Replace the back cover. Assembling 12 Charge the battery Before using the device for the first time, you must charge the battery. You can charge the device with a travel adapter or by connecting the device to a PC with a USB cable. Use only Samsung-approved chargers and cables. Unauthorised chargers or cables can cause batteries to explode or damage your device. . When your battery is low, the device will emit a warning tone and display a low battery message. The battery icon will also be empty. If the battery level becomes too low, the device will automatically power off. Recharge your battery to continue using your device. . If the battery is completely discharged, you cannot turn on the device, even with the travel adapter connected. Allow a depleted battery to charge for a few minutes before you try to turn on the device. › Charge with a travel adapter 1 Open the cover of the multifunction jack. 2 Plug the small end of the travel adapter into the multifunction jack. Assembling 13 Connecting the travel adapter improperly may cause serious damage to the device. Any damage caused by misuse is not covered by the warranty. 3 Plug the large end of the travel adapter into a power outlet. . You can use the device while it is charging, but it may take longer to fully charge the battery. . While the device is charging, the touch screen may not function due to an unstable power supply. If this happens, unplug the travel adapter from the device. . While charging, the device may heat up. This is normal and should not affect your device’s lifespan or performance. . If your device is not charging properly, bring your device and the charger to a Samsung Service Centre. 4 When the battery is fully charged, first unplug the travel adapter from the device and then from the power outlet. Do not remove the battery before removing the travel adapter. Doing this may cause damage to the device. To save energy, unplug the travel adapter when not in use. The travel adapter does not have a power switch, so you must unplug the travel adapter from the outlet when not in use to avoid wasting power. The travel adapter should remain close to the socket when in use. Assembling 14 › Charge with a USB cable Before charging, ensure that your PC is turned on. 1 Open the cover of the multifunction jack. 2 Plug one end (micro-USB) of the USB cable into the multifunction jack. 3 Plug the other end of the USB cable into a USB port on a PC. Depending on the type of USB cable you are using, it may take some time before charging begins. 4 When the battery is fully charged, first unplug the USB cable from the device and then from the PC. Insert a memory card (optional) To store additional multimedia files, you must insert a memory card. Your device accepts microSD™ or microSDHC™ memory cards with maximum capacities of 32 GB (depending on memory card manufacturer and type). Samsung uses approved industry standards for memory cards, but some brands may not be fully compatible with your device. Using an incompatible memory card may damage your device or the memory card and can corrupt data stored on the card. . Your device supports only the FAT file structure for memory cards. If you insert a card formatted with a different file structure, your device will ask you to reformat the memory card. . Frequent writing and erasing of data will shorten the lifespan of memory cards. . When you insert a memory card in your device, the file directory of the memory card will appear in the sdcard folder. Assembling 15 1 Open the cover of the memory card slot on the side of the device. 2 Insert a memory card with the gold-coloured contacts side facing down. 3 Push the memory card into the memory card slot until it locks in place. 4 Close the cover of the memory card slot. › Remove the memory card Before removing a memory card, first unmount it for safe removal. 1 In Idle mode, select >Settings >SD card and phone storage >Unmount SD card >OK. 2 Open the cover of the memory card slot on the side of the device. 3 Push the memory card gently until it disengages from the device. 4 Pull the memory card out of the memory card slot. 5 Close the cover of the memory card slot. Do not remove a memory card while the device is transferring or accessing information, as this could result in loss of data or damage to the memory card or device. Assembling 16 › Format the memory card Formatting your memory card on a PC may cause incompatibilities with your device. Format the memory card only on the device. In Idle mode, select >Settings >SD card and phone storage >Unmount SD card >OK >Format SD card > Format SD card >Erase everything. Before formatt...