Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Fotos und technische Daten HTC Explorer |
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
USB connector 2. VOLUME controls Getting started Back panel 1. 3 megapixel camera 2. Speaker Top panel 1. 3.5mm headset jack 2. POWER 10 Getting started Back cover Removing the back cover Remove the back cover to access the battery compartment, SIM card slot, and storage card slot. 1. Turn off HTC Explorer and hold it securely upside down with the front facing away from you. 2. With your fingers, pry the bottom of the back cover away from the phone while pressing in with your thumb against the middle of the back cover. Replacing the back cover 1. Insert the top half of the phone into the top of the back cover. 2. Press the bottom part of the back cover towards the phone to lock the cover in place. You'll hear a click when the back cover is locked in place. Getting started SIM card The SIM card contains your phone number, service details, and memory for storing phonebook contacts and/or text messages. Inserting the SIM card 1. Take the back cover off. 2. Remove the battery. 3. With the SIM card’s gold contacts facing down and its cut-off corner facing out, insert the SIM card all the way into the SIM card slot. Removing the SIM card Make sure to switch off HTC Explorer before removing your SIM card. 1. Take the back cover off. 2. Remove the battery. 3. Press and hold the SIM card tab. 4. Slide the SIM card out from the SIM card slot. 12 Getting started Storage card Use a storage card to store your photos, videos, and music. Inserting the storage card 1. Take the back cover off. 2. Insert the microSD card into the storage card slot with its gold contacts facing down and slide it in until it is securely in place. Removing the storage card If HTC Explorer is on you must first "unmount" the storage card before removing it to prevent corrupting or damaging the files in the storage card. 1. Take the back cover off. 2. Slide the storage card out from its slot. Unmounting the storage card When you need to remove the storage card while HTC Explorer is on, unmount the storage card first to prevent corrupting or damaging the files in the storage card. 1. From the Home screen, press , and then tap Settings. 2. Tap SD & phone storage > Unmount SD card. 13 Getting started Battery HTC Explorer uses a rechargeable battery. How long the battery can last before it needs recharging depends on how you use HTC Explorer.The features and accessories you use can affect battery life. For example, leaving your Bluetooth® connection always on uses more power. Long phone calls and frequent web browsing use up a lot of battery power. Also, consider your location: poor signal strength from your mobile network and extreme temperature make the battery work harder. Removing the battery 1. Take the back cover off. 2. With your thumb or finger, lift the battery from the battery compartment. Inserting the battery Please use only original batteries that came in the box or replacements that we recommend. 1. Take the back cover off. 2. Insert the battery (with its exposed copper contacts first) into the battery compartment. 14 Getting started Charging the battery Before you turn on and start using HTC Explorer, it is recommended that you charge the battery. • Only the power adapter and USB cable provided in the box must be used to charge the battery. • Do not remove the battery from HTC Explorer while you are charging it using the power or car adapter. 1. Insert the small end of the USB cable into the USB connector. 2. Insert the other end of the USB cable into the power adapter. 3. Plug in the power adapter to an electrical outlet to start charging the battery. When you charge the battery and HTC Explorer is on, the charging battery icon is displayed in the status bar. After the battery has been fully charged, the charging battery icon turns to a full battery icon . When the display is off, an animated icon shows the charging status. As a safety precaution, the battery stops charging when it overheats. Switching the power on or off Switching the power on Press the POWER button. Easy. When you turn on HTC Explorer for the first time, you’ll need to set it up. 15 Getting started Switching the power off 1. If the display is off, press the POWER button to turn it back on, then unlock the screen. 2. Press and hold the POWER button for a few seconds. 3. When the Power options menu appears, tap Power off. Entering your PIN Most SIM cards come with a PIN (personal identification number) set by your mobile operator. If you’re asked for a PIN, enter it and then tap OK. If you enter the wrong PIN three times, your SIM card is blocked. No problem. Just contact your mobile operator and ask for the PUK (PIN Unblocking Key). Finger gestures Tap When you want to type using the keyboard, select items onscreen such as application and settings icons, or press onscreen buttons, simply tap them with your finger. Press and hold To open the available options for an item (for example, a contact or link in a web page), simply press and hold the item. Swipe or slide To s...