Stimmen - 2, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
4 For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product. Your Phone To turn on the phone, press and hold the Power/Lock Key for 3 seconds. To turn off the phone, press the Power/Lock Key for 3 seconds and tap Power off and OK to confirm. Front view Earpiece Power/Lock Key - Powers your phone on/off by pressing and holding the key. - Turns your screen on and off and locks it. Front-Facing Camera Lens - Used to take a self-shot. Quick Keys - Phone Key - Contacts Key - Messaging Key - Applications Key Proximity Sensors - Senses proximity toward other objects, such as your head during a call, so that you do not accidentally activate unwanted features. Menu/Search Key - Displays available options for the current screen. - Touch and hold to activate the search function. Home Key - Returns to the Home screen from any screen. Back Key - Returns to the previous screen. - Closes pop-up menus and dialog boxes. Warning Placing a heavy object on the phone or sitting on it can damage its LCD and touch screen functionalities. Do not cover the LCD’s proximity sensor with a protective film. This can cause the sensor to malfunction. Your Phone TIPS - Tap the Menu Key whenever you open an application to check what options are available. - If your phone has errors when you use it or you cannot turn it on, remove the battery, install it again and turn it on after 5 seconds. Charger/Accessory Port Side view Power/Lock Key 3.5mm Headset Jack Volume Keys - Allows you to adjust the ringer and media volumes, or to adjust the in-call volume during a call. - Press and hold the volume down key to switch to the silent mode. Microphone Rear view Back Cover Fingertip cutout Camera Lens Battery Flash micro SD Card Slot - Accommodates the preinstalled 16GB micro SD™ card (expandable up to 32GB). SIM Card Slot Speaker Getting Started Installing the SIM card and battery Before you can start exploring your new phone, you’ll need to set it up. To insert the SIM card and battery: 1 Hold the phone on your hand firmly. With the other hand, lift the back cover using the fingertip cutout located on the bottom of the cover and remove it. 2 Slide the SIM card into the SIM card slot. Make sure the gold contact area on the card is facing downwards. 3 Insert the battery into place by aligning the gold contacts on the phone and the battery. 4 Replace the back cover of the phone (as demonstrated below). Apply a steady downward pressure until the battery cover clicks into place. Charging your phone 1 Connect the cabless wall adapter and USB cable. 2 Plug the USB cable (as shown below) into the phone's charger/accessory port. Make sure the USB symbol is facing upwards. NOTE The battery must be fully charged initially to improve battery lifetime. NOTE Your phone has an internal antenna. Be careful not to scratch or damage this rear area, as that will cause loss of performance. If the phone is turned off as the battery is fully discharged, the battery is called a weak battery. In this case when the phone connect to the charger(TA or USB) cable, the keypad LED at the bottom of the phone will be blinking. This is normal operation in the weak battery to prevent over-current flowing because the phone is designed to provide reasonable protection algorithm for against damage of battery. And after a few minutes, the LCD is turned on normally. Inserting a micro SD card Insert a micro SD™ card to use the camera and other multimedia features. Multimedia contents can be saved in the micro SD card. LG-P936 has a micro SD card pre-installed. Getting Started NOTE This device supports up to a 32GB micro SD card. 1 Turn the phone off before inserting or removing the micro SD card. Remove the back cover. 2 Then insert the micro SD card into the slot. Make sure the gold contact area is facing downwards. Removing the micro SD card To safely remove the micro SD card from your phone, first you need to unmount it. NOTE On Android OS 2.3 and above, you can download applications from Play Shop and store them on a micro SD card as well as on the phone. Due to this feature, if you skip the unmount procedure, it can cause an error because information between the micro SD card and the phone is not accorded properly. In the worst case, the micro SD card can be corrupted or damaged. 1 From the Home screen, tap the Menu Key and tap Settings > SD card & phone storage > Unmount SD card. 2 Remove the battery cover and gently pull the microSD card from the slot. Warning Do not remove the micro SD card without unmounting it first. Otherwise, it may damage the micro SD card as well as your phone, and the data stored on the micro SD card may be corrupted. Formatting the microSD card Your microSD card may already be formatted. If it isn’t, you must format it before you can use it. NOTE All files on the card are deleted when you format the micro SD card. 1 From the Home screen, tap the M...