Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
• #: While keying in a phone number, a long press of this key enters a pause. Display Information The table below describes various display indicators or icons that appear on the phone’s display screen. On-Screen Icons Icon Description Indicates the strength of the network signal. . Indicates a call is in progress. . The quality of the conversation may change depending on network coverage. When the signal strength is below 2 bars, you may experience muting, call drop and bad audio. Please take the network bars as indicator for your calls. When there are no bars, that means that there is no network coverage: in this case, you won’t be able to access the network for any service (call, messages and so on). Icon Description | M6100 features Indicates that you are roaming on another network. Indicates that GPRS service is available. Indicates the alarm has been set and is on. Indicates the status of the battery charge. Indicates the receipt of a message. Indicates the receipt of a voice message. Indicates that the vibration ringer has been set. Indicates the Loud profile is activated. Indicates the Silent profile is activated. Indicates the Headset profile is activated. M6100 FEATURES \ M6100 features Icon Description Indicates the General profile is activated. Indicates that the phones is accessing WAP. Indicates that you are using GPRS. Agenda event set Call divert service active Bluetooth enabled Note • When the status of the battery indicates low, you may not use Camera or Multimedia function. • While using Multimedia function, the status of the battery is changeable. GETTING STARTED Installing the SIM card and battery Make sure the power is off before you remove the battery. 1. Remove the battery. Press the button to release the battery, then slide the battery down till it stops. Now lift the battery from its compartment. Note Removing the battery from the phone when the power is on may cause the phone to malfunction. 2. Install the SIM card. Insert the SIM card into the holder. Slide the SIM card into the SIM card holder. Make sure that the SIM card is inserted properly and that the gold contact area on the card is facing downwards. To remove the SIM card, press down lightly and pull it in the reverse direction. To insert the SIM card To remove the SIM card Caution! The metal contact of the SIM card can be easily damaged by scratches. Pay special attention to the SIM card while handling. Follow the instructions supplied with the SIM card. | Getting started \ Getting started GETTING STARTED 3. Install the battery. Charging the Battery To connect the mains adapter to the phone, you must have installed the battery. 1. With the arrow facing you as shown in the diagram push the plug on the battery adapter into the socket on the bottom of the phone until it clicks into place. 2. Connect the other end of the mains adapter to the mains socket. Only use the charger included in the box. 3. The moving bars of battery icon will stop after charging is complete. Caution • Do not force the connector as this may damage the phone and/or the charger. • If you use the battery pack charger out of your own country, use an attachment plug adapter for the proper configuration. • Do not remove your battery or the SIM card while charging. Warning • Unplug the power cord and charger during lightning storms to avoid electric shock or fire. • Make sure that no sharp-edged items such as animal teeth or nails come into contact with the battery. There is a risk of this causing a fire. • Do not place or answer calls while charging the phone as it may short-circuit the phone and/or cause electric shock or fire. Note • Ensure the battery is fully charged before Disconnecting the adapter using the phone for the first time. Disconnect the travel adapter from the phone by • Do not remove the battery or SIM card while pressing its side buttons as shown in the diagram. charging. • In the case the battery is not properly 1. When charging is finished, the moving bars of the charged, please turn the phone off and on battery icon stop and ‘Full’ is displayed on the using the power key. Then detach and screen. reattach the battery, and recharge the phone. 2. Unplug the adapter from the power outlet. Disconnect the adapter from the phone by pressing the grey tabs on both sides of the connector and pull the connector out. | Getting started GETTING STARTED \ Getting started Turning your phone on and off Turning your phone ON 1. Install a battery to the handset and connect the phone to an external power source such as the travel adapter, cigarette lighter adapter or hands- free car kit. Or install a charged battery pack to the handset. 2. Press and hold Efor a few seconds until the LCD screen is turned on. 3. Depending on the status of the PIN code request setting you may need to enter your PIN code. Turning your phone OFF 1. Press and hold Efor a few seconds until the LCD screen is turned off. Access codes You can use the access codes described in this...