Stimmen - 4, Durchschnittliche Bewertung: 5
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
In this menu you can set the time format between 12-hour and 24-hour. Set the time [Menu 4-2-1] You can set time of your phone in this menu. 1. Select Set the time by pressing [Select]. 2. Enter the number you want to set the time. 3. Press [set]. Time format [Menu 4-2-2] You can select time format between 12-hour and 24-hour. 1. Scroll to highlight Time format by pressing [Select]. 2. Select 12 hour or 24 hour you want by pressing [OK]. Set the date [Menu 4-2-3] In this menu, you can set the date of your phone. 1. Enter the menu. 2. Select Set the date by pressing [Select]. 3. Enter the number you want to set the date. 4. Press [Set]. Date format [Menu 4-2-4] You can set the Date format in this menu. [Y: Year, M: Month, D: Day] • YYYY/MM/DD • DD/MM/YYYY >• MM/DD/YYYY 1 T 42 Menu Description Phone settings [Menu 4-3] You can set the phone as you want. Scroll to highlight Phone settings menu, and then press [Select]. Language [Menu 4-3-1] This menu provides you with selection of the language. If Automatic is set, the language is chosen based on the current SIM card. English will be set if the language on the SIM card is not supported in the phone. Wallpaper [Menu 4-3-2] You can select one of the pictures by pressing (■ , ) . LED indicator [Menu 4-3-3] You can set the network status thru Call Indicator Light. If you are in service area, Call Indicator Light will flicker to Green. On the contrary, if you are in no service area, this light will change to Red. • Incoming call [Menu 4-3-3-1] This menu allows you to select the color of LED indicator for incoming call. In addition, You can set LED color depending on other groups. • Idle [Menu 4-3-3-2] You can check the network status by LED color in a standby mode. - Enable - Disable Backlight [Menu 4-3-4] You can set the light-up duration you want every time you press a key or open folder. Contrast [Menu 4-3-5] You can set the brightness of LCD you want by pressing (■ , ( . 43 I Settings [Menu 4] Menu Description Call settings [Menu 4-4] You can set the menu relevant to a call by pressing [OK] in Setting menu. Answer mode[Menu 4-4-1] • On folder open [Menu 4-4-1-1] If you select this menu, you can receive an incoming call when only opening folder. - Yes : You can activate the function. - No : You can deactivate the function. • Press any key [Menu 4-4-1-2] If you select this menu, you can receive an incoming call by pressing any key except , ( key. - Yes : You can activate the function. - No : You can deactivate the function. Own number sending [Menu 4-4-2] (network and subscription dependent) You can send your phone number to the other party dependent on setting this function. • Set by network [Menu 4-4-2-1] If you select this, you can send your phone number depending on two line service such as line 1 or line 2. • On [Menu 4-4-2-2] If you select this, you can send your phone number to the other party. That is, your phone number will be displayed on receiver's phone. • Off [Menu 4-4-2-3] I If you select this, you can't send your phone number. 1 I 44 Menu Description Call wait service [Menu 4-4-3] If this service is enabled, you can accept a waiting (incoming) call. If this service is disabled, you cannot recognize the waiting (incoming) call. • Activate [Menu 4-4-3-1] Activating the corresponding service. • Cancel [Menu 4-4-3-2] Deactivating the corresponding service. • Check status [Menu 4-4-3-3] Checking the status of the service. Automatic redial [Menu 4-4-4] • On [Menu 4-4-4-1] When this function is activated, your phone will try to make a call in case of failing to connect. • Off [Menu 4-4-4-2] Your phone will not make any attempts to connect the call after failing to connect. Minute minder [Menu 4-4-5] If you select On, you can check the call duration by beep sound every minute during a call. Phone line in use [Menu 4-4-6] This function is only used if Two-line service is supported by the Service Provider. Two independent phone numbers are registered for the phone. This function provides you with the selection the currently used phone number. 1. Line 1 : Select Line 1 as the current phone number 2. Line 2 : Select Line 2 as the current phone number O Note • If you select Line 2 in the area where alternative supported, you can't make a call. 5 line service is not Settings [Menu 4] Menu Description Data transfer mode [Menu 4-4-7] (network dependent) In case of Single Numbering Service, you can use the phone and the connected PC to send and receive fax, data, and voice. If you select the mode, you can receive data, fax, or voice for each mode. Once you enter this menu, following options are displayed. • Single mode You can receive a voice call, fax call, and data call respectively. • Voice & Fax You can receive a data call after voice call. O Note • Single Numbering Service means that the number of fax or data service is identical with the number of voice ser...