Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
You have received a text message. You have received a voice message depending on your subscription. You have received an E-mail. You can view your schedule. All audible signals are turned off. General menu in profiles. Loud menu in profiles. Quiet menu in profiles. You can use GPRS service. Headset menu in profiles. You can divert a call. ENGLISH 14 Display Information Top Menu Icons Icon Description Messages Call Register Profiles Settings Call Divert Scheduler Fun & Tools Internet Sim service ENGLISH 15 Installation Getting Started Inserting the SIM Card Locate the SIM card socket in the back of the phone. Follow the steps below to install the SIM card. 1. Remove the battery if attached. 2. Slide the SIM card into the slot, under the silvery holders, with the golden connectors facing down and the cut corner to the right. Notice • Before installing always make sure that the phone is switched off and remove the battery. • The metal contact of the SIM card can be easily damaged by scratches. Pay special attention to the SIM card when you handle and install. Follow the instructions supplied with the SIM card. Installing the Battery 1. Place the battery on the back of the phone. ENGLISH 16 Getting Started 2. Push it until you hear a click. Charging the Battery To connect the travel adapter to the phone, you must have installed the battery. 1. Insert one end of the travel adapter into the bottom of the phone. 2. Connect the other end of the travel adapter to an AC wall outlet. Use only the included packing charger. Warning • Do not force the connector as this may damage the phone and/or the travel adapter. ENGLISH 17 Installation Getting Started Disconnecting the charger Disconnect the travel adapter from the phone by pressing its side buttons. Notice • The battery delivered with your phone has to be fully charged before using it. • Do not remove your battery or the SIM card while charging. • “Charging” is displayed on the screen after connecting the travel adapter. Only if the battery is totally empty, Back light is on without displaying “Charging”. • The moving bars of battery icon will stop after charging completely. ENGLISH 18 Powering On Sequence Getting Started To get started with the phone 1. Press and hold E key until you hear a tone. 2. Depending on setting PIN Code [Menu 4-5-1], you can enter PIN code or not. 3. If your phone connects to a network, the network name will be displayed shortly. To turn off the phone In stand by mode, press and hold E key until you hear a tone. ENGLISH 19 Access Codes Getting Started You can use the access codes described in this section to avoid unauthorized use of your phone. The access codes (except PUK and PUK2 codes) can be changed by using [Menu 4-5-6]. PIN code (4 to 8 digits) The PIN (Personal Identification Number) code protects your SIM card against unauthorized use. The PIN code is usually supplied with the SIM card. When PIN code is set Enable, your phone will request the PIN code every time it is switched on. On the contrary, when PIN code is set Disable, your phone connects to the network directly without the request PIN code. PIN2 code (4 to 8 digits) The PIN2 code, supplied with some SIM cards, is required to access some functions such as Advice of call charge, Fixed Dial number. These functions are only available if supported by your SIM card. PUK code (4 to 8 digits) The PUK(Personal Unblocking Key) code is required to change a blocked PIN code. The PUK code may be supplied with the SIM card. If not, contact your local service provider for the code. If you lose the code, also contact your service provider. PUK2 code (4 to 8 digits) The PUK2 code, supplied with some SIM cards, is required to change a blocked PIN2 code. If you lose the code, also contact your service provider. Security code (4 to 8 digits) The security code protects the unauthorized use of your phone. It is usually supplied with the phone. This code is required to delete all phone entries and to activate “Restore factory settings” menu. The default number of Security code is “0000”. You can also change it in Security menu. ENGLISH 20 Phone book Accessing the Menu To select a menu in phonebook, press > [Names] in standby mode and then scroll to a desired item. Name Description 1 Search Allows you to search for a specific name, number. 2 Add new Allows you to add new names and numbers. 3 Speed dial Allows you to assign up to 8 (2-9) one-touch dial allocations. 4 Voice list Allows you to list phone numbers which is attached voice. 5 Caller groups Allows you to show group list. 6 Copy all Allows you to copy entries from your Phone memory to SIM card or from SIM card to Phone memory. 7 Delete all Allows you to erase all the data in either your phonebook or the SIM card to the phone memory. 8 Settings Allows you to set the memory and to search item by variable, name and number. 9 Information Allows you to check the status of memory, SDN (Service Dial Number), and Own number. ENGLISH 21 Pho...