Stimmen - 4, Durchschnittliche Bewertung: 3.3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Schnurlostelefone - B2070 (1.49 mb)
Schnurlostelefone - B2070 (725.47 kb)
Anleitung Zusammenfassung
If the PIN is blocked, you will need to key in PUK code. 5. You can enter your PUK code up to 10 times. If you put wrong PUK code more than 10 times, you can not unlock your phone. You will need to contact your service provider. Phone lock (Menu 4-4-2) You can use security code to avoid unauthorized use of the phone. Whenever you switch on the phone, the phone will request security code if you set phone lock to On. If you set phone lock to Automatic, your phone will request security code only when you change your SIM card. Automatic key lock (Menu 4-4-3) When you enable Automatic key lock, keypad will be locked automatically on an idle screen after 10 seconds without any key requesting. Note ] If you want to lock your phone keypad manually, enter Top menu and press key. ] If you want to unlock your phone keypad, press [unlock] key and then press key. But if you enabled Automatic key lock before, your phone keypad will be unlock and then after 10 seconds the keypad will be lock up again automatically. Call baring (SIM dependent) (Menu 4-4-4) The Call barring service prevents your phone from making or receiving certain category of calls. This function requires the call barring password. You can view the following submenus. • All outgoing The barring service for all outgoing calls. • Outgoing international The barring service for all outgoing international calls. • Outgoing international except home country The barring service for all international outgoing calls except home network. • All incoming The barring service for all incoming calls • Incoming when abroad The barring service for all incoming calls when roaming • Cancel all You can cancel all barring services. • Change password You can change the password for Call Barring Service. Each call barring menu has following submenus: • Activate Allows to request the network to set call restriction on. Settings Settings 4 Settings • Cancel Set the selected call restriction off. • View status View the status whether the calls are barred or not. Fixed dial number (Menu 4-4-5) (SIM dependent) You can restrict your outgoing calls to selected phone numbers. The numbers are protected by your PIN2 code. • Activate You can restrict your outgoing calls to selected phone numbers. • Cancel You can cancel fixed dialling function. • Number list You can view the number list saved as Fixed dial number. Change codes (Menu 4-4-6) PIN is an abbreviation of Personal Identification Number used to prevent use by only unauthorized person. You can change the access codes: PIN1 code, PIN2 code, Security code. 1. If you want to change the Security code/PIN/PIN2 code input your original code, and then press [OK]. 2. Input new Security code/PIN/PIN2 code and verify them. Network settings Menu 4-5 You can select a network which will be registered either automatically or manually. Usually, the network selection is set to Automatic. Automatic (Menu 4-5-1) If you select Automatic mode, the phone will automatically search for and select a network for you. Once you have selected “Automatic”, the phone will be set to “Automatic” even though the power is off and on. Manual (Menu 4-5-2) The phone will find the list of available networks and show you them. Then you can select the network which you want to use if this network has a roaming agreement with your home network operator. The phone let you select another network if the phone fails to access the selected network. Preferred (Menu 4-5-3) You can set a list of preferred networks and the phone attempts to register with first, before attempting to register to any other networks. This list is set from the phone’s predefined list of known networks. GPRS setting Menu 4-6 You can set GPRS service depending on various situation. Power on (Menu 4-6-1) If you select this menu, the phone is automatically registered to a GPRS network when you switch the phone on. Starting a WAP or PC dial-up application created the connection between phone and network and data transfer is possible. When you end the application, GPRS connection is ended but the registration to the GPRS network remains. When needed (Menu 4-6-2) If you select this menu, the GPRS connection is established when you connect a WAP service and closed when you end the WAP connection. Reset settings Menu 4-7 You can initialize all factory defaults. You need Security code to activate this function. Settings Organiser 5 Organiser Alarm clock Menu 5-1 You can set up to 5 alarm clocks to go off at a specified time. 1. Select On and enter the alarm time you want. 2. Select the repeat period: Once, Mon~Fri, Mon~Sat, Everyday. 3. Select the alarm tone you want and press [OK]. 4. Edit the alarm name and press [OK]. Scheduler Menu 5-2 When you enter this menu, a Calendar will show up. On top of the screen there are sections for date. Also on bottom of the screen there are sections for icons (schedule, memo). Whenever you change the date, the calendar will be updated according to the date. And square curso...