Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Before operating the handset: 1 Please read IMPORTAIS SAFETY INSTRUCTIONS on pages 80-84 before use. Read and understand all instructions. 2 Read Precautions on page 75. 3 Fully charge the battery. Refer to Battery Charging on page 12. 4 Register your handset with the base station (see page 16). 5 Fill out the following reference information and tape or staple your purchase receipt here. Model Number:_ ESN No. (under battery on back of handset):_ Purchase Date:_ Dealer Name:_ Emergency Number:_ Lock Code:_ Own Phone Number(s):_ Notice for Canadian Customers:This cordless telephone uses radio communications between the handset and the base station, and may not ensure privacy ot communication. Other devices, including other cordless telephones, may interfere with this cordless telephone or cause noise during operation. Units not containing coded access may be accessed by other radio communication systems. Cordless telephones must not cause interference to any licensed radio service. © 1997 by Matsushita Communication Industrial Co. Ltd. All rights reserved. Published 1997. Printed in USA. Kit Composition Handset EB-PH55 Battery (M) 700 mAh NiCd EB-BM60 AC Charging Adaptor EB-CA10 Handset Kit Operating Instructions Contents Introduction.............................5 Phone Operation Overview..........'.....5 Symbols Used In This Guide..............6 Getting Started...........................8 Handset Overview......................8 Battery Overview......................11 Registering the Handset with the Base Station .........................16 Basic Operation.........................19 Cordless Mode Making a Call.........................19 Answering a Call......................21 Adjusting the Volume...................21 Operation During a Call.................22 Last Number Redial....................23 Cellular Mode Making a Call.........................25 Answering a Call......................26 Adjusting the Volume...................27 Operation During a Call.................28 Last Number Redial....................28 In-Building Mode Making a Call.........................29 Answering a Call......................30 Adjusting the Volume...................31 Operation During a Call................32 Last Number Redial....................32 Operation Modes........................33 Operation Mode Selections..............33 Quick Mode Change...................36 3 Contents Additional Features......................37 Timers..............................37 Lock/Unlock..........................39 Phone Number Selection................42 Cellular Carrier Selection................42 Manual Pause Dialing..................44 Short Pause Dialing/Flash Dialing.........45 Registering Handset/Canceling Registration . 46 Intercom with Multiple Handsets..........47 Paging.............................47 Transferring Calls....................49 3-Way Calling.......................52 Call Delivery .........................53 Call Waiting..........................53 Sending DTMF Keytones ...............54 Caller ID.............................54 Memory Features........................59 Memory Locations.....................59 Last Number Memory ..................65 Scratch Pad Memory...................66 Accessories............................67 Accessory Ordering....................68 Before Requesting Help...................69 Routine Care.........................69 Helpful Hints .........................69 Precautions.............................75 Important Safety Instructions.............80 Other Information......................86 Index..................................H 4 Introduction Phone Operation Overview The handset can be used as a cordless phone by using the Handsel and Base Station Kit (EB-P55S) or a cellular phone. If your place of business is equipped with a wireless in-building telephone system, your handset can be used as a wireless extension to that system. If you do not have a wireless in-building telephone system, disregard the sections in this guide that contain specific in-building information. Your handset periodically scans these systems in the following order: 1. Cordless 2. In-Building 3. Cellular When a system is found, its operation mode is shown on the first line of the display. The current operation mode of the handset is displayed at all times. You can select which systems you want your handset to scan for. You can also switch between the systems you have selected. Your handset, however, does not switch systems during a call. 5 Introduction Calls to your cellular phone number can be forwarded to the base station if Call Delivery service is offered by your cellular service provider (see page 53). Symbols Used In This Guide n Sid Indicates features in the Cordless mode. H in-eido Indicates features in the In-Building mode. BUS Indicates features in the Cellular mode. ^3Cordless Phone (Cordles...