Stimmen - 3, Durchschnittliche Bewertung: 3.3 ( )

Hersteller: Black & Decker Dateigröße: 1.38 mb Dateiname: JE2050,JE2060,JE2060BL,JE2060GY1167.pdf Unterrichtssprache:

3. To remove the pulp separator, grip the juice spout with one hand and the back edge of the pulp separator with the other hand. Pull it up with the cutter/strainer in place (C). 4. To remove the cutter/strainer, hold the juice spout with one hand and grasp the cutter/strainer rim with the other hand; pull it out (D). Caution: The cutter/strainer teeth are very sharp. Handle it carefully. 5. To remove the pulp container, grasp the sides firmly and slide it out. HIOFFLOW A B C D How to Use This appliance is for household use only. Important: Before you use it for the first time, disassemble the unit (see How to Disassemble section); wash all parts as instructed in the Care and Cleaning section. How to Assemble and Use 1. Place the pulp separator on the base with the juice spout facing you (E). 2. Insert the cutter/stainer in the center of the pulp separator. Turn it left and right a few times until it fits into place (F). 3. Grip the pulp container and slide it in until it snaps into place (G). E F G 4 4. Place the cover on top of the pulp separator with feeder in place (H). 5. Lock the locking latches by pressing down the cover as you fit the tab at the top of each latch into the groove on each side of the cover. Press the bottom of each latch until you hear it click into place (J). Important: The unit will not operate until the locking latches are locked. 6. Place the juice cup under the juice spout (K). 7. Cut food into pieces to fit the food chute. 8. Plug unit into an AC outlet. Turn the unit on by turning the control to the Low or High speed position. 9. Place food in the food chute and press lightly with feeder. 10. Every time the pulp container is almost full, turn off and unplug the unit, empty the pulp container and clean the cutter/strainer before you start juicing again. Caution: The cutter/strainer teeth are very sharp. Handle carefully. 11. When juicing is completed, turn off unit and unplug from outlet. Food Tray 1. Follow steps 1-3 in the HOW TO ASSEMBLE AND USE section. 2. Place the cover on top of the pulp separator. 3. Insert food tray through the food chute and place on top of the cover (L). 4. Insert feeder through the food chute on the food tray (M). Note: Use the food tray to hold small fruits, such as berries, grapes, mixed fruit pieces or mixed vegetable pieces as you process them through the food chute. 5. Follow steps 5-11 in the How to assemble and Use section. Juicing Tips When juicing carrots, do not overfill the food chute. Place carrots one by one and use gentle pressure. Juicing avocados or bananas will produce a puree rather than a juice. When juicing large quantities of fruits and vegetables, stop and empty the pulp container as it begins to get full and clean the cutter/strainer before you start juicing again. Care and Cleaning This product contains no user serviceable parts. Refer service to qualified service personnel. To Clean the Unit Always clean all parts after every use to prolong the life of the unit. 1....

Herunterladen

Geben Sie zwei Ziffern: