Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
c) If a long detachable power-supply cord or extension cord is used, 1) The marked electrical rating of the detachable power-supply cord or extension cord should be at least as great as the electrical rating of the appliance, 2) If the appliance is of the grounded type, the extension cord should be a grounding-type 3-wire cord, and 3) The longer cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over. Note: If the power supply cord is damaged, it should be replaced by qualified personnel. In Latin America, by an authorized service center. 2 Product may vary slightly from what is illustrated. . . † 1. Storage cover (Part # CJ625-01) † 2. Large self-reversing cone (Part # CJ625-02) † 3. Small self-reversing cone with stirrers (Part # CJ625-03) † 4. Strainer with adjustable pulp control (Part # CJ625-04) 5. Handle † 6. Clear-view, 1-Liter (34-oz.) container (Part # CJ625-05) 7. Base stem 8. Base 9. Built-in cord wrap † Consumer replaceable/removable parts. . . . . . . . 3 Assembling your Juicer 1. Place the base stem through the container until the container rests on the base (A). 2. Secure the container to the base by turning it clockwise until it’s firmly locked in place (B). 3. Place the strainer on top of the container, with the pulp control tab directly on top of the handle (C). 4. Choose a self-reversing cone. Important: If choosing the large self-reversing cone, place it on top of the small self-reversing cone. Insert the notches of the large cone into the stirrers of the small cone until they snap into place (D). Note: Small cone is recommended for small fruits such as lemons and large cone for larger fruits such as grapefruits. 5. Place the base stem through the cone until the cone rests on top of the strainer (E). A B C D E 4 How to Use This product is for household use only. 1. Wash all parts as instructed in the Care and Cleaning section. 2. Assemble your juicer as instructed in the Assembling your Juicer section. 3. Unwrap the cord from the base. 4. Plug the cord into a standard electrical outlet. 5. Adjust the pulp control to the desired amount of pulp in your juice (F). 6. Cut fruit in half (examples: orange, lime, lemon or grapefruit). 7. Place the cut-side of the fruit on top of the self-reversing cone. 8. Using firm-to-moderate pressure, press down on the fruit to start the juicing action (G). 9. Release pressure to stop the self-reversing cone from rotating. Important: The motor stops automatically when the pressure is completely released. 10. Press down on the fruit again and the self-reversing cone will start rotating in the opposite direction. Note: Repeat steps 8-10 several times for best juicing results. 11. To continue juicing, remove used fruit and repeat steps 6-10. 12. When done juicing, remove the fruit from the cone. Important: The motor stops automatically when you remove the fruit from the cone. 13. Unplug the cord from the standard electrical outlet. 14. To serve or pour the juice, remove the cone and strainer by lifting them straight up. 15. Grip the container handle with one hand and the base with the other hand. 16. Turn the container handle counterclockwise to unlock the container from the base. 17. Lift the container straight up and pour the juice. Care and Cleaning This product contains no user serviceable parts. Refer service to qualified service personnel. To Clean: 1. Always unplug the unit before cleaning or when not in use. 2. Remove the cover (first time use), cone and strainer from the container by lifting them straight up. 3. Immediately rinse the cone and strainer with water after each use. 4. Grip the container handle with one hand and the base with the other hand. 5. Turn the container handle counterclockwise to unlock the container from the base. 6. Lift the container straight up. 7. Use warm, sudsy water to wash all removable parts (cover, cones, strainer and container) or place them in the dishwasher — top rack ONLY. 8. Use a bristle brush to remove fine pulp that may remain on the strainer. 9. Wipe the base with a damp cloth or sponge; do not immerse in water or place in the dishwasher. 10. Dry all parts before reassembling your juicer (see Assembling your Juicer section). To Store: 1. Unplug the unit. 2. Wrap the cord around the base of the unit. 3. Before reassembling your juicer, make sure all parts are dry (see Assembling your Juicer section). 4. Place storage cover over the juicer to keep it dust free. F G 5 6 INSTRUCCIONES DE SEGURIDAD Al utilizar cualquier aparato electrico siempre deben tomarse precauciones basicas de seguridad, incluyendo las siguientes: . Lea todas las instrucciones. . A fin de protegerse contra el riesgo de un choque electrico, no sumerja el cable, el enchufe o la base del aparato en agua o cualquier otro liquido. . La supervision de un adulto es necesaria cuando el aparato es utilizado por ninos o cerca de ellos. . Desconecte el aparato de la toma de...