Stimmen - 5, Durchschnittliche Bewertung: 4.6 ( )

Hersteller: Simplicity Dateigröße: 1.73 mb Dateiname: Unterrichtssprache:

Traction 40 1707452 1 SPRING, Extension 41 1727088 1 ROD, 3/8" Diameter, 26" Long 42 1718793 1 SUPPORT, Gear 43 1960518 2 NUT, Push for 1/4 Diameter Thread 44 1960252 2 CARRIAGE BOLT, 1/4-20 x 5/8 G5 Footnotes The above parts group applies to the following Mfg. Nos.: 1694589 - 9560E 1694597 - 9560M © Copyright2005 Simplicity Manufacturing, Inc. All Rights Reserved. 9 TP 400-4155-01-LW-S Handles and Controls Group - 9560 Models NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The holes in the frame for Ref. 44 are slotted so the gear support (Ref. 42) can be positioned to ensure the inside surface of the gear support is tight against the hub of the front gear (Ref. 50). Mount bushings (Ref. 14) with flange on inside of brackets, 3 places. Slot towards rear of unit. Shift rod assembly (Ref. 61) must pivot freely on pivot blocks, (Ref. 63). Apply adhesive to secure grips. Insert shift rod (Ref. 58) into outter hole of Ref. 64. Must pivot freely on capscrew (Ref 27). Apply lubricant as required. Must slide freely in dash assembly (Ref 13). Apply lubricant as required. 43 1 2 3 9 12 13 15 16 21 11 22 7 12 39 4 5 34 36 37 38 40 54 55 57 56 56 58 64 65 63 66 62 35 54 54 63 56 68 61 60 59 41 42 14 52 46 50 49 51 45 52 44 53 14 14 10 6 48 47 8 57 36 67 49 17 18 19 23 20 24 24 1256 27 14 28 29 35 30 31 32 26 33 986728 The above parts group applies to the following Mfg. Nos.: © Copyright 2 0 0 5 Simplicity Manufacturing, Inc. All Rights Reserved. 10 1694589 - 9560E 1694597 - 9560M TP 400-4155-01-LW-S Handles and Controls Group - 9560 Models REF NO PART NO. DESCRIPTION QTY. 45 1960294 2 NUT, Hex Flange, 1/4-20, Whiz Lock Small 46 1611911 1 SUPPORT, Worm 47 1931333 1 CARRIAGE BOLT, 5/16-18 x 3/4 G5 48 1960684 1 NUT, Hex Keps, 5/16-18, Conical Washer 49 2816168 2 PIN, Spring 1/8 x 3/4 50 1668186 1 WORM, Chute, L.H. 51 1725283 1 ROD, 3/8" Diameter, Chute Worm E-Coat 52 1718593 2 GEAR, Powdered Metal, Metafusion 53 1918452 1 PIN, Cotter 1/4 x 1 54 1722460 1 PIN, Quick 55 1666255 1 ROD, 3/4" Diameter 56 1960685 3 NUT, Hex KEPS, 1/4-20, Conical Washer 57 1931317 2 CARRIAGE BOLT, 1/4-20 x 3/4 G5 58 1726304 1 ROD, 3/4" Diameter, Shift Upper, 11-19/50 Long 59 1726734 1 KNOB, Intermediate Thread, 3/8-16 60 1960705 1 SCREW, Hex Whiz Lock Flange, 1/4-20 x 2-1/4 61 1668523 1 ROD AND CLEVIS ASSEMBLY, Shift, Threaded 62 1924361 1 WASHER, 1/2 63 1668524 2 BLOCK, Pivot, 3/4 x 3/4, Powdered Metal 64 1720240 1 ROD AND ARM ASSEMBLY, Pivot 65 1715123 1 SPRING, Torsion 66 1960074 1 CLIP, Hair Pin 67 1668185 2 BUSHING, 1/2ID x 3/4OD x 1/4LG 68 1960686 4 NUT, Hex Flange, 5/16-18 ESNA Footnotes The above parts group applies to the following Mfg. Nos.: 1694589 - 9560E 1694597 - 9560M © Copyright2005 Simplicity Manufacturing, Inc. All Rights Reserved. 11 TP 400-4155-01-LW-S Engine and Frame Group with Power Boost NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Hook one end of spring (Ref. 7) into top hole of roller arm (Ref. 6) and other end into top hole of the idler arm assembly in the Traction Drive Group. Long hub of idler pulley (Ref. 3) to be toward idler arm (Ref. 6). Position idler pulley (Ref. 14) at center of slot in clutch arm (Ref. 10). Hook one end of spring (Ref. 16) over clutch rod assembly (Ref. 10) between tabs and other end into slot in frame. Torque (4) Engine Bolts to 17 - 21 ft. lbs. or 23 - 29 N m Torque to 10-14 ft. lbs. or 14-20 N m Right rear bolt. Position belt stops 1/16 - 1/8 from belt when auger clutch is engaged. 1 9 17 18 19 20 22 26 27 29 30 31 1324 7 5 6 2 3 4 8 8 10 13 14 15 16 46 29 54 55 56 28 44 11 12 21 40 41 23 25 24 45 47 44 45 57 58 59 3459 3505 3515 36 37 39 43 42 38 48 53 52 1334 35 34 61 62 60 986732 The above parts group applies to the following Mfg. Nos.: © Copyright 2 0 0 5 Simplicity Manufacturing, Inc. All Rights Reserved. 12 1694590 - 1060E 1694591 - 1170E 1694592 - 1280E 1694593 - 1390E 1694598 - 1060M 1694599 - 1170M 1694600 - 1280M 1694601 - 1390M TP 400-4155-01-LW-S Engine and Frame Group with Power Boost PART NO. REF NO DESCRIPTION QTY. 1 1700415 1 V-BELT, 3L (Used on all models Except 1390 Models) 1 1672732 1 V-BELT, 3L (Used Only on 1390 Models) 2 1928731 1 NUT, Hex, Toplock, Jam, 3/8-16 3 1668477 1 PULLEY, Idler 4 1960647 1 SCREW, Hex Head, 3/8-16 x 1-1/2 5 1665994 1 PIN, Flat Head Drilled 6 1703046A 2 ARM, Idler, 5-3/4 LG 7 1727149 1 SPRING, Extension 8 1722460 1 PIN, Quick 9 1676460 2 V-BELT, HA (Used on all models Except 1390 Models) 9 1701257 1 V-BELT, HA (Used Only on 1390 Models) 10 1727058A 1 ROD AND ARM ASSEMBLY, Clutch, Brake w/Pad 11 1669313 1 PAD, Brake 12 2825160 1 RIVET, Pop 13 1928352 1 NUT, Hex Flange, 3/8-16 Whiz Lock Large 14 1726348 1 PULLEY, Idler 15 2860709 1 SCREW, Hex Whiz Lock Flange, 3/8-16 x 1-3/4 16 1727059 1 SPRING, Extension 17 1725287 2 COVER, Belt 18 1935255 1 NUT, Speed, 5/16-18, Lug Type 19 2820426 2 LOCKWASHER, External Tooth, 5/16 20 1918249 2 SCREW, Truss head Slotted, 5/16-18 x 3/4 2...

Herunterladen

Geben Sie zwei Ziffern: