Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
This compact adapter is the easiest way to add high quality sound capability to your notebook or desktop computer. Simply plug it into a USB port and you‘re ready to go. The optical S/PDIF output supports virtual 7.1 channel surround sound for enhanced audio effects when playing games, watching movies, listening to music and Voice over IP applications. Plus, the easily accessible microphone and headphone sockets means there‘s no need to crawl around under your desk when you want to plug your headphones in! For convenience, four buttons allow volume up/down control as well as playback and microphone mute status. System Requirements • Available USB 2.0 port • Windows XP/ Server 2003 and 2008/Vista/7, Mac OS 10.4.11 or higher (Windows 7 and Mac OS does not support Xear 3D software! Please check for latest drivers!) Package Contents • USB Audio Adapter • USB Extension Cable • S/PDIF Adapter • Generic CD • LINDY Manual Features • Optical S/PDIF output provides true 7.1 channel surround sound • Built-in amplifier for rich and powerful sound • Supports AES/EBU, IEC60958, S/PDIF consumer formats for stereo PCM data at S/PDIF output • Supports EAX 2.0, A3D 1.0 and Microsoft DirectSound 3D • Embedded 16Bit ADC input with microphone boost • Xear 3D software offers 27 environment effects, 3 environment sizes, plus a 10band equalizer with pre-sets or manual configuration • Functional keys: playback and microphone mute status, volume up/down control • USB 2.0 Full Speed (12 Mbps), USB audio device compliant • Power from USB port • Plug & Play • LEDs for playback mute and microphone mute • Connectors: USB Type A Male, S/PDIF & Stereo output jack, microphone input jack 3 User Manual English 4 .. Volume control: Increases/decreases the system volume; analogue mode only. .. .. Audio Out: Connect headphones or stereo speakers via mini-3.5mm stereo plug. Doubles as an S/PDIF Optical out when used with the included S/PDIF Optical adapter. .. Volume Mute: Press this button to turn off the system sound, pause for several seconds between button presses; analogue mode only. .. Microphone Mute: Press this button to turn on/off the microphone jack. .. Microphone Jack: Use this jack to connect MP3 players, CD players, iPods and other audio output devices for playback or recording, connect a microphone and turn your system into a P.A. or Karaoke system (analogue mode only). .. Power/Activity LED: The light will be on when the system is powered up. The light will blink when activity is detected, however, the light is not affected by microphone jack inputs. .. Microphone LED: When the microphone jack is muted, the light will turn on. .. USB Connector :– to be plugged in the system.s USB port. .. .. .. .. .. .. .. .. User Manual English Software Installation Windows XP/Server 2003/Server 2008/Vista/7 will automatically install it’s built-in driver for the USB Sound adapter when connected. To get Xear 3D Audio Utility, Mixer, Equalizer and simulated 7.1-channel sound from headphones or stereo speakers, install the Xear 3D software and driver from the CD. Plug in the USB Sound adapter, and allow the Windows driver to load before inserting the software CD. Please check for latest drivers! For Windows XP/Server 2003 1. Insert the software CD. 2. Click start then Run, type X:\BT-USB711\setup.exe, and then click OK. (Change X: to match your CD-ROM drive letter) 3. Click Next, Next . 4. Select Yes, I want to restart my computer now, and then click Finish. For Windows Vista/Server 2008 1. Insert the software CD. 2. Click start, in start search, type X:\BT-USB711\setup.exe, then press Enter. (Change X: to match your CD-ROM drive letter) Windows Vista: click Allow. Server 2008: continue to step #2 3. Select Yes, I want to restart my computer now, and then click Finish. To Verify Installation 1. For Windows XP/2003: right click My Computer, click Manage, and click Device Manager. Continue to step #2. For Windows Vista: right click Computer, click Manage, click Continue, and click Device Manager. Continue to step #2. 2. Double click Sound, video and game controllers: With Xear 3D driver: USB PnP Sound Device will be displayed. With Windows built-in driver: USB Audio Device or C-Media USB Headphone Set will be displayed. Xear 3D Software Utility (for Windows XP/Server 2003 & 2008 and Vista) The Xear 3D quick start icon, located in the system taskbar by the clock, starts automatically during installation. Simply click on the quick start icon to open the audio utility. Enable/Disable Optical S/PDIF Output The Optical S/PDIF out is enabled by default. 1. Click on the Xear 3D quick start icon. 2. From the Main Settings tab, click on the radial button next to S/PDIF Output. 5 User Manual English Speaker Configuration Windows XP 1. From the main desktop, Click Start, Control Panel. 2. Click Sounds and Audio Devices. 3. Select the Audio tab. 4. Click Advanced under Sound Playback, and then click the Speakers tab. 5. Select your sp...