Stimmen - 4, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
To contact us, send an e-mail to: Scanner.support@is.bellhowell.com or call 1-800-SCAN495. Bell & Howell Scanners, 3450 W. Pratt Avenue, Lincolnwood, IL 60712-2705, USA. Phone: 1-800-722-6494 (sales). For worldwide locations, visit our web site at Please be aware that . . . This publication was produced by the Scanner Engineering Department of Bell & Howell Scanners Company. It is intended for use by professional service personnel with appropriate expertise and tools. The material is supplemental information to qualified training and is not to be used by untrained personnel. All safety precautions included in this manual (as well as those for any electro-mechanical device) should be followed. All material in this publication is confidential and is to be used by and distributed to authorized personnel of the purchaser only. All intellectual property rights remain the property of Bell & Howell. No part of this publication may be modified in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of the copyright owner, Bell & Howell Scanners, 3450 W. Pratt Avenue, Lincolnwood, IL 60712-2705 USA. TABLE OF CONTENTS Introduction ................................................................................................1 Scanner covers ........................................................................................ 2 & 3 Power supply assembly ....................................................................................4 Camera assembly ..............................................................................................5 Lower frame .........................................................................................6 - 11 Upper frame ......................................................................................12 & 13 Feeder .......................................................................................14 - 17 Feeder (80 ppm w/o pre-feed)..........................................................................18 Imprinter ..............................................................................................18 Cables ..............................................................................................19 Adjustment targets..........................................................................................19 Kits and Service tool .......................................................................................19 i This page intentionally left blank. ii Introduction This manual contains a listing of the available parts for the Copiscan 8000 Series, firmware version D8, scanners. This listing includes individual parts, assemblies, kits, and service tools. The illustration figure and the parts list are on the same page. The parts listing contains several columns. Callout Description Part No. Functional Description Comments • •••• The Callout refers to the callout number for this part, assembly, or kit as indicated in the illustration figure. • •••• The Description refers to the name given the part on the part as it is inventoried. • •••• The Part Number is the number by which the part is ordered. • •••• The Functional Description refers the use of the part (if different from the Part Description). • •••• The Comment field is used to indicate compatibility to firmware version, relationship to a part or assembly, etc. Assemblies and kits Assemblies, such as cameras, are factory prealigned and calibrated. Individual parts for these assemblies normally are not available. Replace only with another assembly. Kits contain a group of parts but are not factory aligned and calibrated. An example is the transport motor kit. This kit contains the motor and attached pulley and the necessary bushings, washers, and mounting screws. A hardware kit is available which contains: screws, washers, nuts, bushings, standoffs, snap rings, springs, etc. 06/01 1 Scanner Covers 1 2 3 5 4 Figure 1. Callout Description Part No. Functional Description Comments 1 Cover, Top S01255A 2 Cover, Side-left S01256A Upper Left Cover 3 Cover, Left Inspection S01258A 4 Operator Interface 8080S S01273A 8080S Bezel and PCB 4 Operator Interface 8080D S01274A 8080D Bezel and PCB 4 Operator Interface 8100S S002665 8100S Bezel and PCB 4 Operator Interface 8100D S002644 8100D Bezel and PCB 4 Operator Interface 8125S S01271A 8125S Bezel and PCB 4 Operator Interface 8125D S01272A 8125D Bezel and PCB 5 Cover Assy-Frame Left Side S01287D Lower Left Cover 06/01 2 Scanner Covers (continued) 6 7 8 9 Figure 2. Callout Description Part No. Functional Description Comments 6 Cover Side-right S01257A Upper Right Cover 7 Cover, Back Lamp S01266A 8 Cover, Front Lamp S01264A 9 Cover, Card Cage S01259A Lower Right Cover Cover, Back S01253A Not Shown Exit Tray Assy S01280A Not Shown Base Feet S01177A Not Shown 06/01 3 Power Supply 3 2 1 Figure 3. Callout Description Part No. Functional Description Comment...