Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
For details, see Error and Maintenance Messages on page 192. NOTE This product adopts the font of ARPHIC TECHNOLOGY CO., LTD. 1 Basic Operation Use your finger to press option buttons on the Touchscreen. Use the d c or a b to access and scroll through screen menus and setting options. To display and access all the screen menus or options in a setting, press a or b to scroll through them. IMPORTANT DO NOT press the screen with a sharp object, such as a pen or stylus. It may damage the machine. The following steps show how to change a setting in the machine. In this example, the Document Size setting in Scan to PC is changed to Auto. 1 Press d or c to display to PC. 2 Press to PC. 3 Press d or c to display to File. 4 Press to File. 5 Press Options. 6 Press a or b to display Set with Touch Panel. 7 Press Set with Touch Panel. 8 Press On. 9 Press a or b to display Document Size. 0 Press Document Size. A Press a or b to display Auto. B Press Auto. NOTE Press to go back to the previous level. 8 General Information Change the Keyboard Setting 1 Select the keyboard type you want to display on the Touchscreen. 1 Press (Settings), General Setup and then Keyboard Settings. 2 Press QWERTY or ABC. 3 Press . Set the Backlight Brightness If you are having difficulty reading the LCD, change the LCD’s backlight brightness setting. 1 Press (Settings), General Setup, LCD Settings and then Backlight. 2 Press Light, Med or Dark. 3 Press . Set the Dim Timer for the Backlight Set how long the LCD backlight stays on after the Ready screen is shown. 1 Press (Settings), General Setup, LCD Settings and then Dim Timer. 2 Press Off, 10Secs, 20Secs or 30Secs. 3 Press . 9 General Information Memory Your menu settings are stored permanently and, in the event of a power failure, will not be lost, although temporary settings will be lost. (ADS-1500W only) If you have chosen Set New Default for your Scan to USB and Scan to E-mail Server preferred settings, those settings will not be lost. Also, during a power failure, the machine will retain the date and time for approximately 24 hours. Volume When the beep setting is on, the machine will beep when you press a key or make a mistake. You can choose a range of beep volume levels from Low to High, or choose Off. (ADS-1000W) 1 Start the ControlCenter application. • Windows® 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. 2 Click the Device Settings tab (the example below uses Home Mode). 1 10 General Information • Macintosh 1 Click the (ControlCenter2) icon in the Dock. The ControlCenter2 window will appear. 2 Click the DEVICE SETTINGS tab. 1 2 Click the Remote Setup button. The Remote Setup window will appear. 3 Select General Setup in the folder tree (the example below uses Windows®). 4 Select Low, Med, High or Off from the Beep drop-down list. 5 Click Apply and then OK. 11 General Information (ADS-1500W) 1 Press (Settings), General Setup and then Beep. 2 Press Low, Med, High or Off. 1 3 Press . 12 General Information Select Your Language (ADS-1000W) 1 Start the ControlCenter application. • Windows® 1 Click the (ControlCenter4) icon in the task tray and then select Open from the menu. The ControlCenter4 window will appear. 2 Click the Device Settings tab (the example below uses Home Mode). 1 13 General Information • Macintosh 1 Click the (ControlCenter2) icon in the Dock. The ControlCenter2 window will appear. 2 Click the DEVICE SETTINGS tab. 1 2 Click the Remote Setup button. The Remote Setup window will appear. 3 Select Language in the folder tree (the example below uses Windows®). 4 Select your language from the Language on Remote Setup drop-down list. 5 Click Apply and then OK. 14 General Information (ADS-1500W) 1 Press (Settings). 2 Press a or b to display Initial Setup. Press Initial Setup. 3 Press Local Language. 4 Press a or b to display your language. Press your language. 5 Press . 1 15 General Information Set the Date and Time (ADS-1500W only) The machine displays the date and time. 1 Press (Settings). 2 Press a or b to display Initial Setup. 3 Press Initial Setup, Date & Time and then Date. 4 Enter the last two digits of the year on the Touchscreen, and then press OK. 5 Enter the two digits for the month on the Touchscreen, and then press OK. 6 Enter the two digits for the day on the Touchscreen, and then press OK. 7 Press Clock Type. 8 Press 12h Clock or 24h Clock. 9 Press Time. 0 Enter the time on the Touchscreen. (12h Clock only) Press to cycle AM and PM. 1 A Press OK, and then press . Automatic Daylight Saving Time You can set the machine to change the time automatically for Daylight Saving Time. The Time will be adjusted forward one hour in the Spring and adjusted backward one hour in the Fall. The factory setting is Off, therefore, you will have to change the Automatic Daylight Saving Time setting to On as follows. (ADS-1000W) 1 Start the ControlCenter application. • Windows® 1 Click the (ControlCent...
Dieses Handbuch ist für folgende Modelle:Scanner und Kopierer - ADS-1500W (18.46 mb)