Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
1 If it is not illuminated in green, press (Fax). 2 Press Menu, 2, 2, 7. 3 Press or to select On. Press Set. 4 If you selected On, Press or to select one of the standard or your own comments. Press Set. 22.Setup Send 7.Coverpg Setup ^Next Fax Only ЎOn Select ^Ў & Set 5 Press 1 if you want to choose more settings and the LCD will return to the Setup Send menu. —OR— Press 2 to exit if you have finished choosing settings. SETUP SEND 6 -16 Using a printed cover page Using a printed cover page 1 If it is not illuminated in green, press (Fax). 2 Press Menu, 2, 2, 7. 3 Press or to select Print Sample. Press Set. 4 Press Start. Your MFC prints a copy of your cover page. 5 Press Stop/Exit. 22.Setup Send 7.Coverpg Setup ^Off ЎPrint Sample Select ^Ў & Set Broadcasting Broadcasting is when the same fax message is automatically sent to more than one fax number. Using the Set key, you can include Groups, One-Touch, Speed-Dial numbers and up to 50 manually dialled numbers. If you did not use up any of the numbers for Groups, access codes or credit card numbers, you can ‘broadcast’ faxes to as many as 390 different numbers. However, the available memory will vary depending on the types of jobs in the memory and the number of locations used for broadcasting. If you broadcast to the maximum numbers available, you will not be able to use Dual Access and Delayed fax. To include One-Touch or Speed-Dial numbers and manually dialled numbers in the same broadcast, you must press Set between each of the numbers. Use Search/Speed Dial to help you choose the numbers easily. (See Setting up Groups for Broadcasting on page 7-5.) After the broadcast is finished, a Broadcast Report will be printed to let you know the results. ¦ Enter the long dialling sequence numbers as you would normally, but remember that each One-Touch and Speed-Dial number counts as one number, so the number of locations you can store becomes limited. 6 - 17 SETUP SEND ¦ ¦ 1 If it is not illuminated in green, press (Fax). Place the document face up in the ADF, or face down on the scanner glass. 2 Enter a number using One-Touch, Speed-Dial, a Group number, Search or manual dialling using the dial pad. (Example: Group number) 3 When the LCD displays the fax number of the other party, press Set. You will be asked to press the next number. 4 Enter the next number. (Example: Speed-Dial number) 5 When the LCD displays the fax number of the other party, press Set. 6 Enter another fax number. (Example: Manual dialling using the dial pad.) 7 Press Start. If you are using the scanner glass, go to Step 8. 8 To send a single page, press 2 (or press Start again). The MFC starts sending the fax. —OR— To send more than one page, press 1 and go to Step 9. 9 Place the next page on the scanner glass. Press Set. The MFC starts scanning and returns to Step 8. (Repeat Step 8 and 9 for each additional page.) SETUP SEND 6 -18 Overseas Mode Overseas Mode 1 If it is not illuminated in green, press (Fax). Place the document face up in the ADF, or face down on the scanner glass. 2 Press Menu, 2, 2, 9. 3 Press or to select On (or Off). Press Set. 4 Press 1 if you want to choose more settings and the LCD will return to the Setup Send menu. 22.Setup Send 9.Overseas Mode ^On ЎOff Select ^Ў & Set —OR— Press 2 if you have finished choosing settings, and then go to Step 5. 5 Enter the fax number you’re calling. 6 Press Start. If you are using the scanner glass, go to Step 7. 7 To send a single page, press 2 (or press Start again). The MFC starts sending the fax. —OR— To send more than one page, press 1 and go to Step 8. 8 Place the next page on the scanner glass. Press Set. The MFC starts scanning and returns to Step 7. (Repeat Steps 7 and 8 for each additional page.) 6 - 19 SETUP SEND Delayed Fax Delayed Fax 1 If it is not illuminated in green, press (Fax). Place the document face up in the ADF, or face down on the scanner glass. 2 Press Menu, 2, 2, 3. 3 Enter the time you want the fax to be sent (in 24-hour format). Press Set. (For example, enter 19:45 for 7:45 PM.) 22.Setup Send 3.Delayed Fax Set Time=00:00 Enter & Set Key 4 Press 1 if you want to choose more settings and the LCD will return to the Setup Send menu. —OR— Press 2 if you have finished choosing settings, and then go to Step 5. 5 Enter the fax number. 6 Press Start. If you are using the scanner glass, go to Step 7. 7 To send a single page, press 2 (or press Start again). The MFC starts scanning the document. —OR— To send more than one page, press 1 and go to Step 8. 8 Place the next page on the scanner glass. Press Set. The MFC starts scanning and returns to Step 7. (Repeat Step 7 and 8 for each additional page.) The number of pages you can scan into the memory depends on the amount of data that is printed on each page. SETUP SEND 6 -20 Delayed Batch Transmission Delayed Batch Transmission 1 If it is not illuminated in green, press (Fax). 2 Press Menu, 2, 2, 4. 3 Press or to select On (or Off). Press Set. 4 Press Stop/Exit. 22.Setup S...