Stimmen - , Durchschnittliche Bewertung:
(
)
)
Hersteller: Canon
Dateigröße: 1.13 mb
Dateiname:
Unterrichtssprache:
Das Dokument wird geladen, bitte warten
 |
Das Dokument wird geladen, bitte warten
Anleitung Zusammenfassung
If these items come into contact with a high-voltage area inside the copier, this may result in a fire or electrical shock. Safety Considerations If these items are dropped or spilled inside the copier, immediately turn OFF the power switch and unplug the power plug from the socket. Then, contact your service representative. . If copying paper larger than the platen, pay attention to the portion of the paper that runs off the edge. If this is caught in the copier, it may be damaged. . Do not touch the platen area during copying as your hand may be injured if caught by the moving parts. . Turn OFF the power switch for safety when the copier will not be used for a long period of time such as at night. Also, unplug the power plug for safety when the copier will not be used for an even longer period of time such as during consecutive holidays. Maintenance and Inspection WARNING . When cleaning the copier, first turn OFF the power switch and unplug the power plug. Failure to observe these items may result in a fire or electrical shock. 01/ PC150-USA 8 5/11/04, 4:52 PM Getting Started result in burns or a fire. . When removing jammed paper or inspecting the inside of the copier, do not allow necklaces, bracelets or other metal objects to touch the inside of the copier, as this may result in burns or electrical shock. . When removing copy paper which has become jammed from inside the copier, take Consumables WARNING . Do not throw cartridges into open flames, as this may cause the toner to ignite and 1 care not to allow the toner on the jammed copy paper to come into contact with your . Do not store cartridges or copy paper in hands or clothing, as this will dirty your Safety Considerations places exposed to open flames, as this may cause the cartridges or copy paper to hands or clothing. If they become dirty, wash . Clean the copier using a firmly wrung-out them immediately with cold water. Washing ignite and result in burns or a fire. cloth dampened with a mild cleansing with warm water will set the toner and make detergent. Do not use alcohol, benzene, paint thinner or other flammable substances. If flammable substances come into contact with a high-voltage area inside the copier, this may result in a fire or electrical shock. . Do not throw used cartridges into open flames, as this may ignite the toner remaining inside the cartridges and result in burns or a fire. CAUTION . There are some areas inside the copier which are subject to high voltages and high temperatures. Take adequate precaution when performing internal inspections, to avoid burns or electrical shock. it impossible to remove the toner stains. . When removing copy paper which has become jammed from inside the copier, remove the jammed copy paper gently to prevent the toner on the paper from scattering and entering your eyes or mouth. If toner enters your eyes or mouth, wash immediately with cold water and consult a physician. . When loading copy paper or removing jammed originals or copy paper, take care not to cut your hands on the edges of the original or copy paper. CAUTION . Keep cartridges and other consumables out of the reach of small children. If these items are ingested, consult a physician immediately. 9 01/ PC150-USA 9 5/11/04, 4:52 PM Getting Started Handling HandlingHandling Precautions PrecautionsPrecautions Platen • Do not stack objects onto, or press down forcefully upon, the platen. When not Using the Copier • If you have to open the main unit to replace the cartridge or remove jammed paper, close the top cover immediately after performing the necessary operation. Condensation If the copier is brought from the cold outdoors into a warm room, or if the room rapidly heated, condensation may form inside the copier. This can adversely affect the 1 • The maximum allowable load that can be Also be sure to slide the platen back to its quality of your copy images (e.g., blacked- placed on the cover is 4.4 lb. Main Unit • Do not let paper clips, staples, or other foreign objects fall into the copier. Also be careful not to spill any liquids or flammable substances (such as paint thinner, benzene or rubbing alcohol) on the copier. If a foreign object or liquid comes into contact with a dangerous voltage point inside the copier malfunction, fire or electrical shock could occur. • Do not lubricate any part of the copier. • Do not use any extremely flammable substances, such as aerosols, etc., near the copier as such a substance may ignite. original position. • If a cover is to be placed over the copier, be sure to turn OFF the power and allow the copier to cool down beforehand. • Should the copier not be operated for a long period of time, unplug it from its power source. When Storing the Copier Upright • If the copier is to be stored upright with the carrying handle on top, press the power switch to OFF and let the copier cool down beforehand. Stand the copier upright on a flat, level surface so that it does not fall over. • If the copier h...
Dieses Handbuch ist für folgende Modelle:- ()