Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Panasonic Dateigröße: 1.69 mb Dateiname: Unterrichtssprache:

After finishing copying, press the Reset key to return to the initial screen of the current active mode. 90 Chapter 3 Other Features Reserving the Next Copy Job while the Current Copy Job is Progressing The next copy job can be reserved while the current copy job is under way. If Hard Disk Drive is not installed, this function is not available. (Hard Disk Drive is standard equipment for DP-C354/C264. It is optional equipment for DP-C323/C263/C213.) The previous copy job settings can be saved if the Function Parameter “41 Reserve a Job Settings” (Copier Settings > Key Operator) is set to “Save”. This is useful when using the previous copy job settings to the next copy job. To save the previous copy job settings, refer to Copier Settings (For Key Operator) in the Operating Instructions (For Function Parameters) on the provided CD-ROM. 1Place the next original while copying current job. 2Select “Reserve a Job”. 3Select copy features if necessary. 4Enter the desired number of copies. 5Press the Start key. While the current job is progressing, the next copy job will be scanned and stored into the Hard Disk Drive. 90 Chapter 3 Other Features Reserving the Next Copy Job while the Current Copy Job is Progressing The next copy job can be reserved while the current copy job is under way. If Hard Disk Drive is not installed, this function is not available. (Hard Disk Drive is standard equipment for DP-C354/C264. It is optional equipment for DP-C323/C263/C213.) The previous copy job settings can be saved if the Function Parameter “41 Reserve a Job Settings” (Copier Settings > Key Operator) is set to “Save”. This is useful when using the previous copy job settings to the next copy job. To save the previous copy job settings, refer to Copier Settings (For Key Operator) in the Operating Instructions (For Function Parameters) on the provided CD-ROM. 1Place the next original while copying current job. 2Select “Reserve a Job”. 3Select copy features if necessary. 4Enter the desired number of copies. 5Press the Start key. While the current job is progressing, the next copy job will be scanned and stored into the Hard Disk Drive. 91 Chapter Other 91 Chapter Other Interrupt the Current Copy Jobs to Make an Urgent Copy You can interrupt the current copy jobs and make an urgent copy. When scanning the current copy job, other copy jobs cannot be interrupted. 1 Press the Interrupt key while copying. 7 When the copy operation is completed, press the interrupt key again. The screen returns to the previous copy mode. 2 Place original(s). 3 Select copy features if necessary. 8 Press the Start key to resume the previous copying operation. 4Enter the desired number of copies. 5Press the Start key. 6Repeat steps 2 to 5, to start the urgent copy job. Combined Copy Functions 92 Chapter 4 Appendix 1 - > 22 - > 12 - > 22PageBook - > 2N in 1BookletMulti- Size FeedJob Build & SADFSortNon SortShift-SortShift-GroupRotate-SortRotate-GroupStaple- SortPunchZoomAuto Zoom 1 -> 2 / A A A A A A x 2 -> 1 A / A A A A A x x 2 -> 2 A A / A A A A x x 2Page A A A / A A A x x Book -> 2 A A A A / A A x x N in 1 A A A A A / A x x Booklet A A A A A A / x x x x x x x x x x Multi-Size Feed x x x x x x x / x *1 *1 x Job Build & SADF x / x Sort A / A A A A A A Non Sort A A / A A A A A Shift-Sort *1 A A A / A A A A A Shift-Group *1 A A A A / A A A A Rotate-Sort A *1 A A A A / A A x A Rotate-Group A *1 A A A A A / A x x Staple-Sort *1 *2 A A A A A A / Punch *1 A x x / Zoom / A Auto Zoom x x A A A x A x x x A / Edge x Book x x x Margin x x Stamping x x *3 *3 *3 x Centering x x A A A x A x x x Image Repeat A x x A A A x A x x x x Cover x x x x x x x x x x x Page Insertion x x x x x x x x x x x Transparency Interleaving x x x x x x x x x x x x x x x x Overlay x x x x x x x Form Overlay x x x x x x x Digital Sky Shot x x x x x x Manual Sky Shot x x x x x x x x x x x x x x x x x x Completion Notice Interrupt Proof Copy Double Exposure x x x x x x x x x x x Newly Set Functions Initially Set Functions Blank: Combined setting is available. x: Combined setting is not available. A: Next Selection is Carried Out. /: Not available. *1: Setting is possible only when the paper size is the same. *2: “Saddle Stitch” is set. *3: When the Issue Number is selected in Stamping function, Non Sort, Shift-Group or Rotate-Group can not be selected. 93 Chapter Appendix 93 Chapter Appendix Newly Set Functions Initially Set Functions EdgeBookMarginStampingCenteringImage RepeatCoverPage InsertionTransparency InterleavingOverlayForm OverlayDigital Sky ShotManual Sky ShotCompletion NoticeInterruptProof CopyDouble Exposure 1 -> 2 x A A A A 2 -> 1 x x x A A A 2 -> 2 x x A x A A A 2Page x x x A A A x x A A A Book -> 2 x x x A A A x x A A A N in 1 x x x A A A x x A A A Booklet x x x x A A A x x x A A A Multi-Size Feed x x A A A x x x A A A Job Build & SADF x x A A A x A A A Sort A A A A Non Sort *3 A A A A A Shift-Sort *1 A A A A Shift-Group *1 *3 A A A A A A Rotate-Sort A A A A A A A A Rotate-Group *3 ...

Herunterladen

Geben Sie zwei Ziffern: