If properly cared for, your new blower will provide years of dependable service. Please read and follow this instruction manual carefully in order to get the most out of your new equipment. As you carefully unpack your unit, you will find the following items: 1 Blower Unit 1 Handle Assembly including: 1 – Upper Handle with foam grip 2 – Lower Handles 1 Front Caster Wheel Kit including: 1 – Pair Front Caster Brackets (l&r) 1 – Front Caster Wheel 1 – Axle Bolt with lock nut 1 Package of assembly h

Always press spark plug boot snugly onto spark plug terminal of the proper size. (Note: If terminal has detachable SAE adapter nut, it must be securely attached.) A loose connection between spark plug terminal and the ignition wire connector in the boot may create arcing that could ignite combustible fumes and cause a fire. Warning! Never test the ignition system with the boot removed from the spark plug or with a removed spark plug, since uncontained sparking may cause a fire. Warning! Do not o

As an owner of off-road gasoline or diesel engine equipment and/or as an employer, you also may have an obligation under the California Occupational Safety and Health Act or under Proposition 65 to warn persons exposed to gas and diesel engine exhaust and/or other Proposition 65 chemicals in and around your workplace. See California Health and Safety Code section 25249.5, Title 22 of the California Code of Regulations at Section 1200 er seq., and Title 8 of the California Code of Regulations Sec

. Clean up oil or fuel spillage. • Stop and inspect the equipment if you strike an object. Repair, if necessary, before restarting. • Never make adjustments or repairs with the engine running unless specified otherwise. • Park machine on level ground. Never allow untrained personnel to service machine. • Carefully release pressure from components with stored energy. (e.g. springs) • Only replace impellers. Never straighten or weld them. • Keep hands and feet away from moving parts. • Frequently

80 Tooth SaDlina Blade 410.411.4111.4150 8 t 6-8031 Steel Blade Edger Kit 210,211,215,240, 245,310,311,410,2450, 411.4111.4150 9 6-8011 Twin Line Manual Head Kit 240,245,310 410.411.4111 10 6-8108 Comfort Grip Handle Kit 210.310.311 11 6-8045 SDark Arrestor Muffler Kit 410 12 6-8100 .080 R.H. Twin Line (3/8-24 Thd.)Tap Feed Head 212,213,214 13 6-8101 .080 L.H. Twin Line (M10 x 1.25 Thd.) Tap Feed Head 210,211 215.310.311 14 6-8037 .095 L.H. Twin Line Tap Feed Head Kit 210,211 215,310,311

Advertencia! Lea y siga todas las precauciones de seguridad dadas en el manual de instrucciones – el uso incorrecto puede causar lesiones graves o mortales. Instruction Manual 1 -18 Manual de instrucciones 19 - 38 English © ANDREAS STIHL AG & Co. KG, 2008Printed on chlorine-free paperOriginal Instruction Manual0458- 290- 8621-A. M0- 1.E8.Rei. Printing inks contain vegetable oils, paper can be recycled. 0000000270_001_GB Contents IMPORTANT SAFETY INSTRUCTIONS 2 Safety Precautions and Working Tech

It springs back to the run position F. The ignition is switched on again. 452BA122 KN 0009BA011 KN 0009BA021 KN BR 350, BR 430 English Starting As soon as the engine runs BR 350 0009BA012 KN H LA L 0009BA015 KN NPlace the unit securely on the ground and make sure that bystanders are well clear of the N Press the fuel pump bulb at least eight times – even if the bulb is filled with fuel. Cold engine (cold start) BR 430 0009BA016 KN 0009BA013 KN 0009BA022 KN N Push the choke knob in and turn it to

Remember that blowers and all power equipment can be dangerous if used improperly and keep in mind that safety requires careful use in accordance with the instructions and....common sense! SNAPPER POWER EQUIPMENT McDonough,GA» 30253 FUQUA *euaTmra Company (REVISION 4, 8/90) MANUAL # 1-5306 A IMPORTANT SAFETY INSTRUCTIONS A WARNING: Failure to comply with the following instructions may result in serious injury to the operator or other persons. The owner of the blower must understand thes

SR 430, SR 450 English Checking the Spark Plug 000BA039 KNA Engine Running Behavior If engine running behavior is unsatisfactory even though the air filter 1 is clean and the carburetor is properly adjusted, the cause may be the muffler. Have the muffler checked for contamination (carbonization) by your servicing dealer. STIHL recommends that you have N Clean dirty spark plug. N Check electrode gap (A) and 2 servicing and repair work carried out exclusively by an authorized STIHL servicing deale