Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
THIS PRODUCT IS COVERED BY ONE OR MORE U.S. PATENTS. OTHER PATENTS PENDING. RULES FOR SAFE OPERATION The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and their explanations, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures. SYMBOL MEANING Indicates danger, warning or caution. Attention is required in order to avoid serious personal injury. May be used in conjunction with other symbols or pictographs. SAFETY ALERT: SYMBOL MEANING Failure to obey a safety warning will result in serious injury to yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury. DANGER: Failure to obey a safety warning can result in injury to yourself and others. Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury. WARNING: Failure to obey a safety warning may result in property damage or personal injury to yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury. CAUTION: NOTE: Advises you of information or instructions vital tothe operation or maintenance of the equipment. Read the Operator’s Manual(s) and follow all warnings and safety instructions. Failure to do so can result in serious injury to the operator and/or bystanders. FOR QUESTIONS, CALL 1-800-520-5520 • IMPORTANT SAFETY INSTRUCTIONS • READ ALL INSTRUCTIONS BEFORE OPERATING When using the unit, WARNING: you must follow the safety rules. Please read these instructions before operating the unit in order to ensure the safety of the operator and any bystanders. Please keep these instructions for later use. • Read the instructions carefully. Be familiar with thecontrols and proper use of the unit. • Do not operate this unit when tired, ill or under theinfluence of alcohol, drugs or medication. • Children and teens under the age of 15 must not usethe unit, except for teens guided by an adult. • Before each use, thoroughly inspect your unit for looseor damaged parts. Do not use until adjustments orrepairs are made. • All guards and safety attachments must be installed properly before operating the unit. • Use the right tool. Use this unit only as described inthis manual. Do not use for any job except that forwhich it is intended. Use only the manufacturer’srecommended attachments. • Inspect the area before starting the Blower/ Vacuum. Remove all debris and hard or sharp objects such asglass, wire, etc. When using electric DANGER: gardening appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury. Carefully read and understand the entire operator's manual before using your unit. Pay close attention to the operating instructions and safety warnings. • Use the unit only in daylight or good artificial light. • Keep all bystanders, especially children and pets, atleast 50 feet (15 m) away from the unit while operating. ELECTRICAL SAFETY WARNINGS • Since the tool is double-insulated, a 2-wire extension cord (an extension cord without a ground) may beused. A 3-wire extension cord (an extension cord witha ground) that uses a NEMA type connector (parallelblade, U ground) is recommended. Extension cordsare available from your local retailer. Use only round- jacketed extension cords approved for outdoor use. • This tool is double-insulated. Repair or replace damagedcords. To reduce the risk of WARNING: electrical shock, use only SW-A, SOW-A, STW-A, STOW-A, SJW-A, SJOW-A, SJTW-W or SJTOW-A cord types. • To reduce the risk of electrical shock, this unit has a polarized plug (one blade is wider than the other). This unit will fit with a polarized plug in one way only. If the plug does not fit fully into the unit, reverse the plug. If it still does not fit, use a cord with the correct connection. Do not modify the unit in any way. MINIMUM WIRE SIZE FOR EXTENSION CORDS FOR 120 VOLT APPLIANCES USING 0-12 AMPS* Cord length (ft.) 25 50 100 150 Wire size (AWG)* 16 16 16 14 *The wire size (AWG) for appliances using 12 to 16 amps is 14 AWG for 25 feet, 12 AWG for 50 feet, and not recommended for 100 or 150 feet. RULES FOR SAFE OPERATION • CORD SETS: Make sure your cord set is in goodcondition, with a cord that is heavy enough to carrythe current that your unit will draw. An undersized cordset will cause a drop in line voltage resulting in a lossof power, as well as overheating. The table shownabove illustrates the correct size to use depending onthe cord length and nameplate amperage rating. If indoubt, use the next heavier size line gauge. Thesmaller the gauge number, the heavier the cord. Toprevent the cord from disconnecting from the unit, usethe cord hook shown in the Operating Instructions. •Ground Fault Circuit Interrupter (GFCI) protection...
Dieses Handbuch ist für folgende Modelle:Lüftungs - TB125QS (1.06 mb)