Stimmen - 1, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
The California Air Resources Board’s Emission Warranty Parts List specifically defines the emission-related warranted parts. (EPA’s regulations do not include a parts list, but the EPA considers emission-related warranted parts to include all the parts listed below.) Techtronic Industries North America, Inc., will provide any documents that describe its warranty procedures or policies within five days upon request by the California Air Resources Board. EMISSIONS PARTS LIST Emissions parts vary from product to product. Your emissions control system warranty applies to any of the following components that may be included on your product: (1) Fuel Metering System (i) Carburetor and internal parts (and/or pressure regulator or fuel injection system). (ii) Air/fuel ratio feedback and control system. (iii) Cold start enrichment system. (iv) Fuel Tank. (2) Air Induction System (i) Controlled hot air intake system. (ii) Intake manifold. (iii) Air filter. (3) Ignition System (i) Spark Plugs. (ii) Magneto or electronic ignition system. (iii) Spark advance/retard system. (4) Exhaust Gas Recirculation (EGR) System (i) EGR valve body and carburetor spacer, if applicable. (ii) EGR rate feedback and control system. (5) Air Injection System (i) Air pump or pulse valve. (ii) Valves affecting distribution of flow. (iii) Distribution manifold. (6) Catalyst or Thermal Reactor System (i) Catalytic converter. (ii) Thermal reactor. (iii) Exhaust manifold. (7) Particulate Controls (i) Traps, filters, precipitators, and any other device used to capture particulate emissions. (8) Miscellaneous Items Used in Above Systems (i) Electronic controls. (ii) Vacuum, temperature, and time sensitive valves and switches. (iii) Hoses, belts, connectors, and assemblies. Techtronic Industries North America, Inc., will furnish with each new engine written instructions for its maintenance and use by the owner. The Emissions Compliance Period referred to on the Emissions Compliance label indicates the number of operating hours for which the engine has been shown to meet Federal emission requirements. Category C=50 hours, B=125 hours, and A=300 hours. WARRANTY this product was manufactured with a catalyst muffler Congratulations! You have made an investment toward protecting the environment. In order to maintain this product’s original emission level, please refer to the maintenance section below. EMISSIONS MAINTENANCE SCHEDULE AND WARRANTED PARTS LIST Emissions Parts Inspect Before Clean Every Replace Clean Every Replace Every Each Use 5 Hours Every 25 Hours 25 Hours 50 Hours or Yearly or Yearly CATALYTIC MUFFLER ASSEMBLY....................................................................................................................X AIR FILTER ASSY includes: Filter Screen......................................................X SPARK SCREEN.................................................................................................................................................X CARBURETOR ASSY includes: Heat Dam.........................X Gaskets............................X FUEL TANK ASSY includes: Fuel Lines.........................X Fuel Cap...........................X Fuel Filter IGNITION ASSY includes: Spark Plug.........................................................................................X ALL EMISSIONS-RELATED PARTS ARE WARRANTED FOR TWO YEARS OR FOR THE PERIOD OF TIME PRIOR TO THE PARTS FIRST SCHEDULED REPLACEMENT WHICHEVER COMES FIRST. CALL US FIRST For any questions about operating or maintaining your product, call the Ryobi® Help Line! Your product has been fully tested prior to shipment to ensure your complete satisfaction. 3 - Francais Regles de securite generales AVERTISSEMENT : Lire attentivement toutes les instructions. Le non- respect de toutes les instructions ci-dessous peut entrainer un choc electrique, un incendie et / ou une intoxication par le monoxyde de carbone, ce qui peut causer des blessures graves voire la mort. . Ne pas laisser des enfants ou personnes n’ayant pas recu une formation adequate utiliser cet unite. . Ne jamais lancer ou faire tourner le moteur dans un endroit clos. Les gaz d’echappement peuvent etre mortels. . Toujours porter une protection oculaire certifiee conforme a la norme ANSI Z87.1 ainsi qu’un protection auditive. Si cette precaution n’est pas prise, des objets peuvent etre projetes dans les yeux et causer des lesions graves. . Garder les badauds, enfants et visiteurs a une distance de 15 m (50 pi). . Porter des pantalons longs, manches longues, des chaussures de travail et des gants epais. Ne pas porter de vetements amples, shorts, bijoux quels qu’ils soient, sandales et ne pas travailler pieds nus. . Pour reduire les risques de happement par les pieces en mouvement, ne pas porter de vetements amples, foulards, colliers ou autres articles de meme nature. Attacher les cheveux longs pour les maintenir au-dessus des epaules, afin qu’ils ne se prennent pas dans les pieces en mouvement...
Dieses Handbuch ist für folgende Modelle:Lüftungs - RY09951 (4.38 mb)