Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
[NAME/VALUE] Changes the indication of the parameter name and its value. [SHIFT]+[NAME/VALUE] Changes the meter display mode. [ON] (in the normal status) Turns each channel off or on (mutes/unmutes the signal). [SHIFT] + [ON] of the Master Channel (in the normal status) Turns all the channels including the Master Channel off or on (mutes/unmutes the signal). [SHIFT] + [ON] of each channel (in the normal status) Turns all the channels with the exception of the Master Channel off or on (mutes/unmutes the signal). [ON] (with the [SOLO] lamp turned on) Turns the Solo function of each channel on or off (applies to the Channel Module/Software Synthesizer Module) [SHIFT] + [ON] (with the [SOLO] lamp turned on) Turns the Solo function of each channel on or off (applies to the Channel Module/Software Synthesizer Module) [SOLO] Changes the function of the [ON] button to the Solo function. [SHIFT]+[SOLO] Determines the Solo/Mute settings of the selected tracks in the Track View window. [SHIFT]+[REC RDY] Turns track recording on or off. [AUDIO] Starts the Audio Mixer or moves the Audio Mixer Window to the front of the computer screen. This button operation applies to the Channel Module software. [INST] Starts the Audio Mixer or moves the Audio Mixer Window to the front of the computer screen. This button operation applies to the Software Synthesizer Module. [MIDI] Starts the MIDI Editor (such as the Multi Part Editor) or moves it to the front of the computer screen. [AUX/BUS] Opens the AUX/BUS window or brings it to the front of the computer screen (when the Audio Mixer is active). [OTHER] Starts the Audio Mixer or brings it to the front of the computer screen. This operation applies to the Effect Module software. (Only PAN is available in the R settings.) [BANK ] Scrolls through the track indication every eight channels. [SHIFT]+[F1] Brings the Track View window to the front of the computer screen. (This operation applies to the current song.) [SHIFT]+[F2] Starts the Mixer window (Audio Mixer/Multi Part Editor) or brings it to the front of the computer screen. [SHIFT]+[F3] Opens the List window or brings it to the front of the computer screen. [SHIFT]+[F4] Closes the current window. [SHIFT]+[F5] Opens the Piano Roll window or brings it to the front of the computer screen. [SHIFT]+[F6] — [SHIFT]+[F7] Starts the TWE (Wave Editor). [SHIFT]+[F8] Alternately hides/shows the Transport window (Transport Bar/ Location Bar/Record). [RWD] Press briefly to move back one measure at a time, or hold to continuously rewind. [FF] Press briefly to move forward one measure at a time, or hold to continuously fast-forward. [STOP] Press to stop recording or playback. Pressing this when playback is stopped goes to the top of the song. [PLAY] Press to start playback from the current point. [REC] Press this to enter/exit from the Recording Standby. The [F] (Play) and [I] (Rec) lamp are turned on during recording. [SCRUB] Determines how the Scrub function is applied when using the dial. When this is set to on, Scrub moves according to the Grid position in the Track View window. When set to off, it moves in measures. [UP] (with the [ZOOM] lamp turned off) Moves the cursor (indicating the current track) up. [DOWN] (with the [ZOOM] lamp turned off) Moves the cursor (indicating the current track) down. [LEFT] (with the [ZOOM] lamp turned off) Selects the next block. [RIGHT] (with the [ZOOM] lamp turned off) Selects the previous block. [ZOOM] Turns Zoom on and off. [UP]/[DOWN]/[LEFT]/[RIGHT] (with the [ZOOM] lamp turned on) PAN mode [PAN] Knobs 1 - 8 (tweaking) Zooms in/out in the active Track View and Piano Roll Window. Edits the Pan (on page 1). Knobs 1 - 8 (tweaking) Edits the Input level (on page 2). [SHIFT] + Knobs 1 - 8 (pressing) AUX SEND mode [SEND] (Not aKnobs 1 - 8 (tweaking) Resets the edited parameter to the default value (CENTER/0.00). vailable when the AUX/BUS window is active.) Edits the AUX Send Level. [SHIFT] + Knobs 1 - 8 (pressing) EFF SEND mode [EFFECT] (NotKnobs 1 - 8 (tweaking) Resets the edited parameter to the default value (-.). available when the AUX/BUS window is active.) Edits the Effect Send Level. [SHIFT] + Knobs 1 - 8 (pressing) Resets the edited parameter to the default value (-.). 58 Data List Remote Control Assignments Remote Control Assignments When controlling Logic: Functions assigned to [F1] - [F6] and [SF1] - [SF5] buttons ASSIGNMENT FADER BANKS PAN / SEND PAN / SEND TONE GLOBAL VIEW ARP FX UTILITIES EQ TONE TONE ARP FX ARP FX EQ SEND TRACK PAN/SURND EQ BANK-L BANK-R SHIFT PLUG-IN INSTRUMENT DIAL RESET KN1-4/5-8 FLIP CHANNEL-L CHANNEL-R BANK-L BANK-R SHIFT NAME/VALUE DIAL RESET KN1-4/5-8 AUX MIDI TR INPUTS AUDIO TR AUDIO INST GLOBAL VIEW SHIFT BUSSES OUTPUTS USER KN1-4/5-8 SAVE CANCEL ENTER BANK-L BANK-R SHIFT UNDO NAME/VALUE DIAL RESET KN1-4/5-8 F5 F1 F2 F3 F4 SHIFT F6 F7 F8 KN1-4/5-8 NUDGE MARKER CYCLE REPLACE SOLO SHIFT DROP CLICK DIAL RESET KN1-4/5-8 CURSOR-L CURSOR-DWN CURSOR-UP ZOOM BANK-L BANK-R SHI...
Dieses Handbuch ist für folgende Modelle:Tasteninstrumente - MOTIF ES7 (695.99 kb)
Tasteninstrumente - MOTIF ES8 (695.99 kb)