Login:
Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung Yamaha, modell CP300

Hersteller: Yamaha
Dateigröße: 10.13 mb
Dateiname:

Unterrichtssprache:ruen

Das Dokument wird geladen, bitte warten
Das Dokument wird geladen, bitte warten


Dieses Gerät hat auch andere Anweisungen:

Anleitung Zusammenfassung


The instrument returns to the previous display after three seconds. Rename the Song correctly. Do you wish to execute the operation? This message prompts you to execute a file-related operation. Press the B [+ (YES)] button to save the settings. Press the B [– (NO)] or [EXIT] button to cancel. The instrument is processing the data internally. Wait until the message closes, then proceed to the next step. The factory default settings, excepting files stored to storage memory (refer to “Factory Set” on page 71), have been restored. This message also appears if you press and hold down the C7 key and turn on the power to the instrument (page 17). The factory default settings, including files stored to storage memory (refer to “Factory Set” on page 71), have been restored. This message also appears if you press and hold down the C7 and Bb6 keys and turn on the power to the instrument (page 17). BulkDataReceiving Completed BulkDataReceiving Error BulkDataReceiving BulkDump Error Canceled Completed DataFmtErr DuplicatedName Execute?--> Executing FactorySet Completed MemoryFileExcludedFactorySet Completed MemoryFileIncluded Название песни или параметров исполнения дублируется. Вы попробовали сохранить файл песни после того, как переименовали его с помощью функции “Rename Song” (стр. 83) или файл с настройками исполнения после того, как переименовали его с помощью функции “Rename File” (стр. 80) но песня или файл с таким названием уже существуют. На дисплее будет отображаться предыдущее сообщение через 3 секунды. Правильно переименуйте песню Message ListCP300 Owner’s Manual94AppendixAppendixMessage ListThe messages are listed in alphabetical order. MessageDescriptionBulk data reception has been completed. This is shown following the “Bulk Data Receiving Voice” message. This indicates that the instrument finished receiving bulk data, and that you can go on to the next step. Bulk data reception has failed. Check that the cable connection is secure and try again. The instrument is receiving bulk data while this message is displayed. Wait until the message closes, then go on to the next step. The instrument failed to transmit the bulk data. If this message appears, make sure that the power of your computer has not been turned off, that the cable is connected correctly, and that the driver on your computer is functioning correctly. Then try transmitting the data once again. This is shown when the operation has been canceled. The operation is completed. This is shown following the “Executing” message. The instrument’s internal processing is complete. You can go on to the next step. The file format is invalid. This message appears when the Performance file selected via “Load From Mem.” (page 79) is invalid and cannot be called up. The Song name or Performance name is duplicated. You tried to save a Song file after changing its name using the “Rename Song” (page 83), or a Performance file after changing its name using the “Rename File” (page 80) parameter, but a Song or Performance with the same name already exists in memory. The instrument returns to the previous display after three seconds. Rename the Song correctly. Do you wish to execute the operation? This message prompts you to execute a file-related operation. Press the B [+ (YES)] button to save the settings. Press the B [– (NO)] or [EXIT] button to cancel. The instrument is processing the data internally. Wait until the message closes, then proceed to the next step. The factory default settings, excepting files stored to storage memory (refer to “Factory Set” on page 71), have been restored. This message also appears if you press and hold down the C7 key and turn on the power to the instrument (page 17). The factory default settings, including files stored to storage memory (refer to “Factory Set” on page 71), have been restored. This message also appears if you press and hold down the C7 and Bb6 keys and turn on the power to the instrument (page 17). BulkDataReceiving Completed BulkDataReceiving Error BulkDataReceiving BulkDump Error Canceled Completed DataFmtErr DuplicatedName Execute?--> Executing FactorySet Completed MemoryFileExcludedFactorySet Completed MemoryFileIncluded Хотите выполнить действие? Это сообщение предлагает вам выполнить действие, связанное с работой с файлами. Нажмите кнопку B [+ (YES)] для сохранения настроек. Нажмите кнопку B [– (NO)] или [EXIT] для отмены Message ListCP300 Owner’s Manual94AppendixAppendixMessage ListThe messages are listed in alphabetical order. MessageDescriptionBulk data reception has been completed. This is shown following the “Bulk Data Receiving Voice” message. This indicates that the instrument finished receiving bulk data, and that you can go on to the next step. Bulk data reception has failed. Check that the cable connection is secure and try again. The instrument is receiving bulk data while this message is displayed. Wait until the message closes, then go on to the next step. The instrument failed to transmit the ...

Dieses Handbuch ist für folgende Modelle:
- ()

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien