Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Tasteninstrumente - YDP-S51 (123.76 kb)
Tasteninstrumente - YDP-S51 (405.07 kb)
Anleitung Zusammenfassung
To transpose the pitch down: While holding down [DEMO/SONG] and [PIANO/VOICE], press a key between F2 (–6) and B2 (–1). To transpose the pitch up: While holding down [DEMO/SONG] and [PIANO/VOICE], press a key between C3 (+1) and F3 (+6). To restore the normal pitch: While holding down [DEMO/SONG] and [PIANO/VOICE], press the C3 key. F 2 C3 F 3 ENGLISH -5 -3 -1 0 +2 +4 +5 -6 -4 -2 +1 +3 +6 Lowest key Transpose down Transpose up Normal pitch Fine-tuning the Pitch You can fine-tune the pitch of the entire instrument in about 0.2 Hz steps. This lets you match the keyboard pitch finely to that of other instruments or CD music. To tune up (in about 0.2 Hz steps): Press and hold down the [DEMO/SONG] and [PIANO/VOICE] simultaneously, and press [+R]. To tune down (in about 0.2 Hz steps): Press and hold down the [DEMO/SONG] and [PIANO/VOICE] simultaneously, and press [–L]. To set the pitch to 442.0 Hz: Press and hold down the [DEMO/SONG] and [PIANO/VOICE] simultaneously, and press the A0 key. Lowest key A0 To restore default pitch: Press and hold down the [DEMO/SONG] and [PIANO/VOICE] simultaneously, and press [+R] and [–L] simultaneously. Hz (Hertz): This unit of measurement refers to the frequency of a sound and represents the number of times a sound wave vibrates in a second. Setting range: 414.8 – 466.8 Hz Default Setting: A3 = 440.0 Hz YDP-S51 Owner’s Manual 19 ENGLISH ENGLISH Layering Two Voices (Dual mode) You can layer two Voices and play them simultaneously to create a more richly textured sound. 1 Engage the Dual mode. While holding down [PIANO/VOICE], simultaneously hold down two keys between C1 and A1 to select the two desired Voices. For information on which Voices are assigned to the keys, refer to “Voice List” (page 16). Adjusting the balance -5 -60 4 2-1 +1 +3 +6 -3 -1-1 00 +2 +1 +1 +4 +5 C5 F5 Highest key C1 F1 A1Lowest key F5C6 F6 Engaging Dual mode Voice 1 Voice 2 The Voice assigned to the lower key will be designated as Voice 1, and the Voice assigned to the higher key will be designated as Voice 2. You cannot assign the same Voice to both Voice 1 and Voice 2 simultaneously in Dual mode. To shift the Octave for each Voice: While holding down [PIANO/VOICE], press one of the C5-F5 keys. To adjust the Balance between two Voices: While holding down [PIANO/VOICE], press one of the F5–F6 keys. A setting of “0” produces an equal balance between two Voices. Settings below “0” increase the volume of Voice 2 while settings above “0” increase the volume of Voice1, in relation to the other. 2 To exit from Dual mode, press [PIANO/VOICE]. Shifting the octave NOTE The Dual and Duo modes (page 21) cannot be engaged at the same time. 20 YDP-S51 Owner’s Manual Advanced Operations Advanced Operations This function allows two different players to play the instrument, one on the left and the other on the right, over the same octave range. 1 While holding down [PIANO/VOICE], press [+R] and [–L] simultaneously to engage Duo. The keyboard is divided into two sections, with the E3 key as the Split Point. ENGLISH Equivalent to C3 (middle C) Split Point E3 Equivalent to C3 (middle C) Left Voice (Voice 2) Right Voice (Voice 1) 2 One person should play the left section of the keyboard while the other plays the right. To shift the Octave for each Voice: Same operation as in Dual (page 20). To adjust the volume balance between two keyboard sections: Same operation as in Dual (page 20). Pedal function in Duo • Damper Pedal: Applies Sustain to the right section. • Sostenuto Pedal: Applies Sustain to both sections. • Soft Pedal: Applies Sustain to the left section. 3 To exit from Duo, simultaneously hold down [PIANO/VOICE] and press [+R] and [–L]. NOTE The Split Point cannot be changed from E3. NOTE If the keyboard is in Dual, engaging Duo will exit from Dual. The Voice 1 is used as the Voice of the entire keyboard. YDP-S51 Owner’s Manual 21 ENGLISH ENGLISH Song Playback and Practice Listening to 50 Preset Songs In addition to the Demo Songs, Preset Songs are provided for your listening pleasure. 1 Find the number of the Song that you want to play back from the included “50 greats for the Piano.” The number of each piano Preset Song is assigned to the C2–C6 keys. 2 While holding down [DEMO/SONG], press one of the C2–C6 keys to start playback. C3 C4 C2 Song 1 Song 10 Song 20 Song 30 Song 40 Song 50 (C6) C5 Highest key (C7) The [PLAY], [+R] and [–L] lamps light, and playback continues the sequence: starting with the selected song, the playback of the Preset Songs will continue. After the last Preset Song, the sequence then returns to the first Preset Song and repeats until you stop it. To change the Preset Song during playback: Press [+R] or [–L] to change to the next or previous Preset Song. To change the tempo during playback: Press [METRONOME] to start the Metronome, then press [+R] or [–L] to increase or decrease the Tempo value by 1. Other instructions are same as those of the Metronome Tempo (page 14). To play back from the be...