Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
• Noise may occur depending on the settings made in the Filter display of the Mixing Console. Adjust the Harmonic Content or Brightness controls in the Filter display (page 82). The sound does not change when replacing Voices with the Song Auto Revoice feature. • Depending on the particular Song data, there are some instances where Song Auto Revoice has no effect, even when replacing Voices. The sound of the Voice doesn’t change, even when editing the Voice. •Keep in mind that adjustments made to the parameters may not make much change in the actual sound depending on the original settings of the Voice. Voices other than those in the Preset display cannot be selected for Step recording. •This is normal. Style Style playback does not start. • Make sure to press the STYLE CONTROL [START/STOP] button. • MIDI Clock may be set to “EXTERNAL.” Make sure this is set to “INTERNAL” (page 194). Only the rhythm channel plays. • Make sure the Auto Accompaniment function is turned on; press the [ACMP ON/OFF] button. •You may be playing keys in the right hand range of the keyboard. Make sure to play keys in the chord range of the keyboard. Styles cannot be selected. • If the size of the Style data is large (120 KB or greater), the Style cannot be selected because the data is too large to be ready by the instrument. The desired chord is not recognized or output by the auto accompaniment. •You may not be playing the correct keys for indicating the chord. Refer to “Chord Types Recognized in the Fingered Mode” of the separate Data List. •You may be playing the keys according to a different fingering mode, and not the one currently selected. Check the accompaniment mode, and play the keys according to the selected mode (page 98). CVP-305/303/301 Owner’s Manual 198 Synchro Stop cannot be turned on. Synchro Stop cannot be turned on. Synchro Stop cannot be turned on when the fingering mode is set to “Full Keyboard” or “AI Full Keyboard,” or when Style On/Off is set to off. Make sure the fingering mode is set to something besides “Full Keyboard” or “Al Full Keyboard” and set Style On/Off to on. Auto accompaniment chords are recognized regardless of the split point or where chords are played on the keyboard. •This is normal if the fingering mode is set to “Full Keyboard” or “AI Full Keyboard.” If either of these is selected, chords are recognized over the entire range of the keyboard, irrespective of the split point setting. If desired, select a different fingering mode (page 98). When playing back one Style and selecting another, the newly selected Style doesn’t play at the proper Tempo. •This is normal; the Tempo setting remains constant when changing Styles. Starting a Song while playing back a Style stops Style playback. This is because Song playback has priority. The two ways shown below let you play back a Style and Song simultaneously. • Set the Song to Synchro Start standby, then start the Style. • Start the Style playback after playing back a Song. The level balance of the various Parts becomes wrong or unexpected sounds are output when selecting a Style or a Voice after selecting a Song. •The level balance of the Parts can change and unexpected sounds can be produced because of the effects applied to each Part. The “Off” setting is not shown for the Play Type parameter in the Assembly (Style Creator) feature. •The selected section is set to record enable. Release the recording assignment by pressing the appropriate [1†]– [8†] button in the recording channel display (TAB [v] button > BASIC tab > [F] REC CH). The channels BASS-PHR2 cannot be edited in Channel Edit. •This is normal; BASS-PHR2 channels of the Preset Styles cannot be edited. Registration memory The Song/Style registered to the Registration Memory cannot be called up. • If the registered Song/Style is contained on external media such as SmartMedia card and the media is not inserted or connected to the instrument, the Song/Style cannot be called up. Insert or connect the appropriate media containing the Song/Style data. The order for calling up Registration Memory settings is not shown on the Registration Sequence setting display. •The bank containing the Registration has not been selected. Select the appropriate bank (page 122). When using the Freeze function of the Registration Memory, the On/Off setting of the Left Part does not change even when changing the Registration Memory setting. •The Left Part On/Off setting is included in the Style group. Remove the checkmark from “STYLE” in the Freeze setting display (page 123). Even though a Registration Memory setting containing a User/Card voice is selected, the File Selection display shows a Preset Voice. •This is normal; even with the Preset Voice shown, the actual sounding Voice is the selected User/Card Voice. When a User/Card Voice is saved to the User/Card drive, the actual data is divided into two separate types: 1) the source Preset Voice itself, and 2) the parameter settings as set in the Sound Creator. ...
Dieses Handbuch ist für folgende Modelle:Tasteninstrumente - CVP-303 (8.05 mb)
Tasteninstrumente - CVP-305 (8.05 mb)