Stimmen - 2, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
This is convenient when this instrument is played with other instruments or with a recorded performance. 1. On the SOUND menu display, select MASTER TUNING. • The display changes to the following. 2. Use the a and v buttons to adjust the pitch within a range of 427.3 to 453.0 Hz. • The decimal can be set to 0, 3 or 6. 1.0n the SOUND menu display, select OVERALL TOUCH SENSITIVITY. • The display changes to the following. |SOUND ] BL OUERfiLL TOUCH SENSITIUITV TOUCH SENSE NORMAL MINIMUM RANGE : ON 113 Practical applications Part VI Adjusting the sounds Key Scaling The temperament (tuning) of this instrument can be adjusted. Various types other than standard temperament are available to choose from. 1. On the SOUND menu, select KEY SCALING, o The display looks similar to the following. |SOUND| \m KEY SCALING SCALING TVPE • USER SCALING SHIFT = ♦ 2 EKEV= 0] 5OTLING NODE : TOTAL I ♦ 10 00 ♦12-20 00 ♦ 100 □□ - 50 00 00 00-12 2. Select SCALING TYPE. 3. Use the a and v buttons to select the type. • Select from OFF, RANDOM, PIANO, ORCHESTRA, PYTHAGOREAN, WERCKMEIS-TER, KIRNBERGER, ARABIC 1 to 5, SLENDRO, PELOG, USER. ® OFF is equal temperament tuning, o Select USER if you wish to use a customized scaling (explained in the following section). o User type scaling You can adjust the instrument to a customized scaling. « In KEY SCALING, the pitch of each note of the octave is slightly shifted up or down from the standard (equal temperament) tuning. 1. Select USER for the SCALING TYPE. 2. Adjust the key scaling. ® Use the balance buttons below the display to adjust the pitch of the corresponding key shown on the display. ® Use the leftmost balance buttons below the display to switch between white keys and black keys. o Increments are in cents (one hundredth of an equal-tempered semitone). A + value raises the pitch and a - value lowers the pitch in relation to standard tuning (equal temperament). 4. Select SCALING SHIFT. 5. Use the a and v buttons to select the key in which you are going to perform. o These KEY SCALING settings can be set to on or off for each part. (Refer to page 111.) 6. Select SCALING MODE. 7. Use the a and v buttons to select a scaling mode. SOUND: The preset key scaling specified for individual sounds is active. TOTAL: The key scaling selected for this instrument is active for all parts. (Select this mode if you are selecting a tuning type.) 114 Part VI Adjusting the sounds Techni-chord Type Select the desired harmony style for the TECHNI-CHORD. 1. On the SOUND menu display, select TECH- ■ ORCHESTRATOR NI-CHORD. Use this function to specify which part plays the • The display changes to the following. harmony notes. By assigning different sounds to the melody notes and harmony notes, you can achieve a striking TECHNI-CHORD performance. Use the a and v buttons to specify the part for the harmony notes. • LEFT and PART 16 cannot be selected. • If CONDUCTOR is selected, the CONDUCTOR part which is currently selected will be specified as the part for the harmony notes. However, when RIGHT 1 and RIGHT 2 are both on, the harmony notes are produced in the sound for the RIGHT 1 part. S ”■TECHNI-CHORD TVPE CLOSE i OPEN 1 BIG BAND BRASS OPEN 2 BIG BPND REEDS DUET OCTAUE COUNTRY HARD ROCK THEATRE FANFARE HVHN l> TVPE E> ORCHESTRATOR : RIGHT 1 PART 2. Use the TYPE a and v buttons to select the harmony style. • When the OCTAVE, HARD ROCK or FANFARE style is selected, the TECHNI-CHORD functions even when the keyboard is not split. • For a detailed explanation of the different harmony styles, refer to the separate REFERENCE GUIDE provided. You can also access this display by pressing and holding the TECHNI-CHORD button. • In this case, the display exits the setting mode a few seconds after you make the setting. 115 Practical applications Part VI Adjusting the sounds Left Hold Select the mode to specify how the left section of the keyboard sounds during an AUTO PLAY CHORD performance. 1. On the SOUND menu display, select LEFT HOLD. ° The display changes to the following. |SOUND Qj| LEFT HOLD SETTING irvik LEFT HOLD : OFF II 1 r 2. Use the ON and OFF buttons to set the mode to on or off. m OFF BASIC ADVANCED 1, 2 PIANIST When rhythm is stopped The specified chord sounds in the CHORD part sound. The specified chord sounds in the CHORD part sound, and the pressed keys sounds in the LEFT part sound. The CHORD part and the LEFT part do not sound (the entire keyboard produces the RIGHT part sound). When rhythm is playing The CHORD part and the LEFT part do not sound. The CHORD part does not sound, but the pressed keys sound in the LEFT part sound. ta ON BASIC ADVANCED 1, 2 PIANIST When the rhythm is stopped or playing The specified chord sounds in the LEFT part sound. The specified chord sounds in the LEFT part sound. The CHORD part and the LEFT part do not sound (the entire keyboard produces the RIGHT part sound)....