Stimmen - 3, Durchschnittliche Bewertung: 3.3 ( )

Hersteller: Roland Dateigröße: 14.42 mb Dateiname: Unterrichtssprache:

PROGRAM CHANGE Here’s how to transmit a program change message on the current channel (p. 42). 1 Use the [ ] [ ] buttons to move the cursor to “PGM CHANGE” in the display. The display will show the program change number that was transmitted most recently. 2 Use the [VALUE] knob to specify the desired program change number. The program change message will be transmitted. Bank Select (BANK) If you want to use the [VALUE] knob to switch the bank number, set the System setting “FUNCTION” to “BANK LSB” or “BANK MSB.” * For details, refer to “[VALUE] knob Settings” (p. 68) . Here’s how to transmit bank select (MSB, LSB) messages. 1 Use the [ ] [ ] buttons to move the cursor to “USER ASSIGN” in the display. The display will show the bank select number that was transmitted most recently. 2 Use the [VALUE] knob to specify the desired bank select number. Bank select (MSB, LSB) messages will be transmitted. 43 Performing (Play Mode) Selecting the UPPER and LOWER Sounds Performing (Play Mode) Selecting the UPPER and LOWER Sounds Selecting the UPPER Sound Selecting the LOWER Sound The entire keyboard will play the UPPER sound. The entire keyboard will play the LOWER sound. UPPER LOWER 1 Press the [UPPER] button so it’s lit. 2 Use the [ ] [ ] buttons to move the cursor to “PGM CHANGE” in the display. 3 Turn the [VALUE] knob. The UPPER sound will change. When you play the keyboard, you’ll hear the sound specified for UPPER. * The [UPPER] button will be lit when you turn on the power. 1 Press the [LOWER] button so it’s lit. 2 Use the [ ] [ ] buttons to move the cursor to “PGM CHANGE” in the display. 3 Turn the [VALUE] knob. The LOWER sound will change. When you play the keyboard, you’ll hear the sound specified for LOWER. * The assignment of the [LOWER] button can be changed in A-PRO Editor’s keyboard set window ( p. 26). 44 Performing (Play Mode) Layering Two Sounds (DUAL) Playing Two Sounds Separately (SPLIT) Performing (Play Mode) Layering Two Sounds (DUAL) Playing Two Sounds Separately (SPLIT) UPPER LOWER 1 Press the [DUAL] button so it’s lit. * If the cursor is at “PGM CHANGE” in the display, turning the [VALUE] knob will change the UPPER sound. * To change the LOWER sound, set ACTIVE PART (p. 62) to LOWER. Then move the cursor to “PGM CHANGE” and turn the [VALUE] knob. * The assignment of the [ DUAL] button can be changed in A-PRO Editor’s keyboard set window ( p. 26). The SPLIT button lets you play the UPPER sound in the range of C4 and above, while playing the LOWER sound in the range of B3 and below. UPPER C4B3 LOWER 1 Press the [SPLIT] button so it’s lit. * If the cursor is at “PGM CHANGE” in the display, turning the [VALUE] knob will change the UPPER sound. * To change the LOWER sound, set Active Part (p. 62) to LOWER. Then move the cursor to “PGM CHANGE” and turn the [VALUE] knob. * The assignment of the [SPLIT] button can be changed in A-PRO Editor’s keyboard set window ( p. 26). 45 Performing (Play Mode) Adjusting the Playing Dynamics (VELOCITY) Performing (Play Mode) Adjusting the Playing Dynamics (VELOCITY) . If desired, the A-PRO can also transmit notes with a fixed velocity value, regardless of your playing dynamics. This is convenient when you want to record notes into your DAW software at a fixed velocity. You can also adjust the sensitivity of the keyboard and change the velocity curve (the way in which velocity responds to your dynamics) . Specifying a Fixed Velocity (KEY VELOCITY) Changing the Keyboard Touch (VELOCITY CURVE) The system “FUNCTION” setting “KEY VELOCITY” lets you specify a fixed velocity. Refer to the system setting “KEYBOARD VELOCITY CURVE” (p. 60) . * You can use the following method, or refer to “[VALUE] knob Settings” (p. 68). If “KEY VELOCITY” is assigned to the [VALUE] knob, you can also use the following procedure to specify the velocity. 1 Use the [ ] [ ] buttons to move the cursor to “USER ASSIGN” in the display. The display will indicate the velocity value that was transmitted most recently. 2 Use the [VALUE] knob to specify the desired velocity value (TOUCH, 1–127) . If the display indicates “TOUCH,” the transmitted velocity value will correspond to the force with which you play the keyboard. [VALUE] knob assignment Here’s how to assign “KEY VELOCITY” as the “FUNCTION.” 1. Press the [ACT] button and [ ] button simultaneously to enter Edit mode. 2. Turn the [VALUE] knob until “FUNCTION” Press the [ENTER] button. fig.lcd-keyvelocity.eps 3. Use the [VALUE] knob to select VELOCITY,” and then press button. This completes the settings takes you back to Play For more about FUNCTION, to “FUNCTION” (p. 68) . 46 Performing (Play Mode) Muting the Controller Values (PRM MUTE) Performing (Play Mode) Muting the Controller Values (PRM MUTE) This is useful in situations such as when a parameter value is far away from the position of the controller; you can use the [PRM MUTE] button to mute the controller, and then move the controller near the parameter value to match the knob position with ...

Herunterladen

Geben Sie zwei Ziffern: