Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Procedure To tune up (in about 0.2Hz steps): Press and hold down the A–1, B–1 and C0 keys simultaneously, and press any key between C3 and B3. To tune down (in about 0.2Hz steps): Press and hold down the A–1, B–1 and C0 keys simultaneously, and press any key between C3 and B3. To restore standard pitch: Press and hold down the A–1, B–1, C0 and C0 keys simultaneously, and press any key between C3 and B3. To tune up To tune down To restore standard pitch Hz (Hertz): This unit of measurement refers to the frequency of a sound and represents the number of times a sound wave vibrates in a second. Setting range: 427.0–453.0 Hz Standard pitch: 440.0 Hz C3 B3 C0B-1 A-1 C 0 B-1 A-1 C0 B-1 A-1 C 0 YDP-160/140 Owner’s Manual 23 Selecting & Playing Voices Using the Metronome Your digital piano features a built-in metronome (a device that keeps an accurate tempo) that is convenient for practicing. Procedure 1. Start the metronome. Press the [METRONOME] button to turn on the metronome. Determines the Time Signature While holding down the [METRONOME] button, press one of the C3–F3 keys. D 3C 3 C3 D3 E3 F3 The highest key C3 key: No downbeat, C3 key: 2/4, D3 key: 3/4, D3 key: 4/4, E3 key: 5/4, F3 key: 6/4 Adjusting the Tempo You can adjust the metronome tempo by pressing the [+] or [–] button while the metronome is playing. The tempo of the metronome and preset song playback can be set from 32 to 280 beats per minute. A number is assigned to each of the following keys. While holding down the [METRONOME] button, press a sequence of C4–A4 keys to specify a three-digit number. Select a number starting from the left-most digit. For example, to set the tempo “95,” press the C4 (0), A4 (9) and F4 (5) keys in sequence. Increasing the tempo value in steps of one: While the metronome is playing, press the [+] button. Alternatively, press and hold down the [METRONOME] button, and press the C5 key. Decreasing the tempo value in steps of one: While the metronome is playing, press the [–] button. Alternatively, press and hold down the [METRONOME] button, and press the B4 key. Increasing the tempo value in steps of ten: Press and hold down the [METRONOME] button, and press the D5 key. Decreasing the tempo value in steps of ten: Press and hold down the [METRONOME] button, and press the A4 key. C4 A4F4 METRONOME 024 579 8631 C 5A 4 B4 C5 D5 The highest key Resetting the tempo to default: While the metronome is playing, press the [+] and [–] buttons simultaneously. Alternatively, press and hold down the [METRONOME] button, and press the C5 key. To reset the tempo to default value of 120 while the metronome is stopped, press the [METRONOME], [+] and [–] buttons simultaneously. 24 YDP-160/140 Owner’s Manual Selecting & Playing Voices C1 G2 The volume level increases as you press higher keys. The lowest key Adjusting the Volume You can change the volume of the metronome sound. While holding down the [METRONOME] button, press one of the C1–G2 keys to determine the volume. 2. Stop the metronome. Turn off the metronome by pressing the [METRONOME] button. Adjusting the Keyboard Touch (Touch Sensitivity) You can adjust the volume level, which changes depending on how fast This setting is disabled with some voices, such as an organ or strong you hit the keys (keyboard touch). Select an appropriate key- sound. board touch for the voices, songs or your taste. Key Touch Sensitivity Setting Description A6 Fixed The volume level does not change at all regardless of whether you play the keyboard soft or hard. A6 Soft The volume level does not change much when you play the keyboard soft or hard. B6 Medium This is the standard piano touch response. (This is the default setting.) C7 Hard The volume level changes very widely from pianissimo to fortissimo to facilitate dynamic and dramatic expression.You have to hit the keys hard to produce a loud sound. Procedure While holding down the [PIANO/VOICE] button, press one of the A6–C7 keys to select the desired touch sensitivity. C7A6 YDP-160/140 Owner’s Manual 25 Recording your Performance Recording your Performance Your digital piano’s recording function enables you to record your performance of one song. The recorded performance is called the “user song.” Follow the steps below to record and play back your performance. Audio recording and data recording Cassette tape recordings use a different data format than this instrument. Cassette tapes record audio signals. On the other hand, this instrument records information about the notes and voices being played and about the timing and tempo of those notes. It does not record audio signals. When you play back a recorded performance on this instrument, its internal tone generator reproduces the sound according to the recorded information. CAUTION Be careful not to erase the recorded data: After you record a performance on this instrument, the [PLAY] button indicator lights up. When this indicator remains on, recording another performance will erase the recorded d...
Dieses Handbuch ist für folgende Modelle:Tasteninstrumente - Arius YDP-140 (854.42 kb)