Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
1.2 Connection • Connect the front panel to the main board. Instructions • Connect the main board to a FATAR TP10 (or TP23) keyboard. • Connect the main board to pedal (see Table 1-1 for pinout). • Connect the main board audio outputs to line level inputs of a mixer, a stereo sound system, etc. • Connect the main board to 12V/1A DC power supply (- to tip, + to ring). Table 1-1. Pedal Inputs (J15) Pinout Pin No. Function Description 1 Pedal Ground Reference Ground for pedal inputs 2 Forte (Sustain) 6 level Half-pedal • Sustain Max if connected to Pedal Ground • Sustain Off if not connected 3 Sostenuto On/Off pedal • Sostenuto on if connected to Pedal Ground • Sostenuto off if not connected 4 Una Corda (Soft) On/Off pedal • Soft on if connected to Pedal Ground • Soft off if not connected 08PIA-DK Digital Piano with ATSAM9708 and ATSAM3303 User Guide 6163A–DRMSD–12-Jul-05 Connecting the 08PIA-DK Connecting the 08PIA-DK Front Panel Figure 1-1. 08PIA-DK Front Panel Style Selection Rhythm Only Chorus Reverb Dynamic Intro/Ending Fill In/Key Start Start/Stop Variation Set Tempo + Equalizer: - Treble Tempo -Bass Instrument Select Demo Rec Mode Track 2 Track 1 Metronome Play/Rec Start 1.4 Implementation 1.4.1 Instrument Select Table 1-2. Instrument Select Setting Instrument 1 Studio Grand Piano 2 Concert Grand Piano 3 Electric Piano 1 4 Electric Piano 2 5 Harpsichord 6 Vibes 7 Strings 8 Church Organ Layer (dual) mode is available by simultaneously pressing two “Instrument Select” buttons. 08PIA-DK Digital Piano with ATSAM9708 and ATSAM3303 User Guide 6163A–DRMSD–12-Jul-05 Connecting the 08PIA-DK Connecting the 08PIA-DK 2 Reverb Type Possible settings are: • Room1 • Room2 • Hall Reverb depth can be set for each instrument. Follow the steps below: 1. Hold the “Reverb” button pressed down. 2. Use the “Tempo +/-” buttons to adjust the reverb depth in the range from 0 to 20 1.4.3 Chorus Possible settings are: • Off • Chorus1 • Chorus2 Chorus depth can be set for each instrument. Follow the steps below: 1. Hold the “Chorus” button pressed down. 2. Use the “Tempo +/-” buttons to adjust the chorus depth in the range from 0 to 20. 1.4.4 Dynamic Curve Possible settings are: • Normal • Hard • Soft • Fixed Velocity (default = 64) The value for the fixed velocity can be set: 1. Press the “Dynamic” button repeatedly until all the “Dynamic” LEDs are off. 2. Hold the “Dynamic” button pressed down. 3. Use the “Tempo +/-” buttons to adjust the fixed dynamic in the range from 0 to 127. 1.4.5 Sympathetic Press the “Set” button repeatedly. Resonance • 0 = No resonance • 1 = Low resonance depth • 2 = Medium resonance depth • 3 = High resonance depth 1.4.6 Demo Press “Demo”, then press the “Instrument Select” button 1, 2 or 3. 08PIA-DK Digital Piano with ATSAM9708 and ATSAM3303 User Guide 6163A–DRMSD–12-Jul-05 Connecting the 08PIA-DK Connecting the 08PIA-DK Metronome Possible settings are: • On • Off The metronome signature can be set. Follow the steps below: 1. Hold the “Metronome” button” pressed down. 2. Use the “Tempo +/-” buttons to choose the signature. Available signatures are 1/4, 2/4, 3/4, 4/4, 6/4, 6/8, 12/8. 1.4.8 Sequencer Use “Rec Mode”, “Play/Rec Start”, “Track 1" and “Track 2" buttons. Below is an example of how to use the sequencer: • Record track 1: 1. Press the “Rec Mode” button. The “Rec Mode” LED is lit. 2. Press the “Track 1" button. “Play/Rec Start” and “Track 1" LEDs are flashing. 3. Start recording by playing the keyboard or by pressing the “Play/Rec Start” button. “Play/Rec Start” LED stops flashing and stays lit. 4. Stop recording by pressing the “Rec Mode” button. “Rec Mode” LED is off. • Play track 1: 1. If “Track 1" LED is not lit, press the “Track 1" button. The “Track 1" LED is lit. 2. Press the “Play/Rec Start” button to play what is recorded on Track 1. The “Play/Rec Start” LED is lit. • Record track 2: 1. Press the “Rec Mode” button. “Rec Mode” and “Track 1" LEDs are lit. 2. Press the “Track 2" button. “Play/Rec Start” and “Track 2" LEDs are flashing 3. Start recording by playing the keyboard or by pressing the “Play/Rec Start” button. “Play/Rec Start” LED stops flashing and stays lit. 4. Stop recording by pressing the “Rec Mode” button. “Rec Mode” LED is off. • Play track 1 and track 2: 1. If “Track 1" LED is not lit, press the “Track 1" button. The “Track 1" LED lights up. 2. If “Track 2" LED is not lit, press the “Track 2" button. The “Track 2" LED lights up. 3. Press the “Play/Rec Start” button to play what is recorded on Track 1 and Track 2. The “Play/Rec Start” LED is lit. 08PIA-DK Digital ...